Reviews
Universal Product
I bought it to clean the parts that were soaked with oil.
It may be a little soft, but I will adjust it by cutting it a little.
View detail
That's about it
I used it for the first time and was able to adjust it. It would have been easier if the tip was cut thinner to make it easier to get into the gap. View detail
Cleaning brush!
Large sturdy, even when left on kerosene! View detail
It is the best in the same price range, with many Gauge and good cosmetics.
It is a simple tool, so I chose it for its cost performance. 25 sheets are enough to use. The dimensions are Large and do not seem to be out of order. View detail
For Parts Cleaning
[How is it used?
Used to clean Engine Parts of vehicles under Restore.
When I watch Restore videos, they all use a similar Brush, so where do they sell it? I was wondering, but when I went searching I found a few that are normal.
We purchased this product, which was relatively inexpensive among them.
Was the one you received as per Image?
It is just the right Size as shown in the picture.
Also, although the bristles are firm, I personally felt that they could be a little firmer. I personally felt that it could be a little firmer.
How was your experience with it?
The PVCNylon bristles, however, are not as firm, so it is somewhat difficult to remove stubborn dirt.
I think it is sufficient to remove ordinary dirt.
The hairs did not fall out during use.
[Points to note]
If you do not choose the right place to use it, you may scratch your car.
How did it compare to other products?
I used to do my best with Tooth Brush, but it was small and sometimes took quite a long time.
I felt that this product would be more suitable for use in non-narrow areas, etc.
【Review】
It was easy to use and inexpensive and necessary and sufficient for cleaning Parts.
Personally, I thought the hair could have been a little firmer.
View detail
sufficient for one's needs
[How is it used?
TZr250R (3XV) I bought this because I didn't have a Thickness Gauge to match the Engine overhaul of
I chose this product that was inexpensive and had a good reputation, although it is also available from various other manufacturers.
Was the one you received as per Image?
I was surprised that the Package was completely full of OEM feeling, but the product itself was as Image lol.
How was your experience with it?
I received it and immediately measured the SIDEClearance of Piston ring.
Anyone can easily take measurements as long as it is inserted straight in from the side.
Of course I don't have a calibration tool, so I don't know if the values are really correct, but it seems to be a solid product from a solid company, so it should be large and durable.
It is as an afterthought, but because the limit of use of Piston ring was near, when it wanted to exchange, when the price of Piston Ring Set of TZr250R was examined, One Side6000 Yen or less, it decided that it did not see anything.
【Review】
This is a must have for Engine overhaul.
It was easy to use and the numerical notation was easy to read.
Whether you replace parts or not, it's Large important to know the condition of your car.
I was worried that the product I received might be rusty, but it was well oiled and moved smoothly.
View detail
For cleaning the fins of air-cooled engines!
[How is it used?
I use it for the engine wash for Vehicle of XJR1300C of MainMotorcycle which is an air-cooled engine.
Surprisingly, I've been looking for a longer, stiffer Brush like this and it's been very helpful for Engine washes.
Was the one you received as per Image?
I thought the hair was a little shorter than the Image. There was no Scale, so you can use the Keyboard as a guide.
The tips of the bristles are quite stiff and scrape out the dirt well.
How was your experience with it?
It's got a wooden handle, very easy to use! I would recommend this to anyone with another air cooled engine!
If you use it too roughly, the brush can get rough, bent, and loose, so I think it's more than worth the price, but I'd be happy if it was more durable!
[Points to note]
The bristles are hard, so if you wash too hard, you may damage the paint on the Engine, so it's better to be gentle when using it.
It is also not recommended for scratches on the body, etc. It is recommended for stubborn stains on the wheels and undercarriage, off cars, etc.
How did it compare to other products?
The bristles are longer than the other brushes, so you can scrape out the dirt and grime. This brush is recommended for those who want to scrape out fine dirt from deep inside.
I also bought a Brush from Motorun, but it was still not long enough for my Engine fin.... It is just the right length and is very useful.
Also, the fact that the bristles are made of durable PVCNylon and are not affected by solvents is a GoodPoint!
View detail
For cleaning of small areas
[How is it used?
I usually compete in Enduro races.
When I was washing my car, I used the so-called Car Wash Brush to scrub the car, but the Large Threshold Brush can't reach the small areas.
I was looking for a good Brush, and I found this one.
Was the one you received as per Image?
As per Image
How was your experience with it?
I like the softness of the tips. But it also has a firmness and can be washed well.
In addition, as it is claimed that it is made of material that does not lose to kerosene, it does not scare with Alkali detergent.
[Points to note]
After washing, rinse it under running water and shape it to prolong its life, I think.
How did it compare to other products?
I think the cost performance is high. That's Dr. Minimoto.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I use this detergent in diluted form.
Cleaner for tough grease stains (https://www.webike.net/sd/24635926/)
View detail
Accurate feeler gauges
Tested against Mitutoyo calipers and they are accurate.
Tested against MitutoyoCaliper, they are accurate.
View detail
It will be such a thing
Purchase reason for this time purchased for adjustment of PlugGap in Wotani.
The thickness and number of items were purchase points.
Gap 1. This product was just right as it has to be adjusted to 3 mm
You can also use various points such as Point
There was also a special tool to adjust PlugGap
Somehow, I thought that the accuracy is right here..
It is a feeling I used, but I feel like it is not possible and not possible
View detail
For Tappet adjustment
I bought it for CUB's Tappet adjustment.
It was very easy to use and the price was also cheap so it was good.
Product personality etc etc. There is no such thing as it will come out so I will not say such things as kore is the best, but I can recommend.
View detail