Reviews
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
good
I think it is worth buying because it can be used for various types of cars!
It would be nice to have one, especially for a 4MINI, as it will be used more often!
View detail
Fits: HONDA CROSS CUB, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB 50
Required for Flywheel removal
Required for Flywheel removal
Flywheel came off easily.
I don't use it except to remove the flywheel, so it seems expensive, but I can't work without it, so I don't have a choice.
View detail
Required for Engine disassembly and assembly
This is a special tool needed when disassembling and assembling engines. I use it for disassembling and assembling MONKEY engines. View detail
CRF100F (2007) Used in
Flywheel can be easily removed without any problem.
It is only a tool to remove Flywheel, so I wonder if it is cosmetic. Anyway, the Flywheel can be easily removed.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Fly Wheel Puller
It worked fine to remove the Flywheel on the NSR50. View detail
Used for CREA SCOOPY
It is a solid product for the price.
I was able to remove the Flywheel easily with no problems.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
We need it.
I use it to work on pulling the Flywheel out of my LEAD 100.
It is introduced only by MONKEY and GORILLA in the suitable car model.
You can use LEAD 100 without any problem.
I don't have a lot of opportunities outside of the Overhaul below the waist, but
When I need it, I need it… I can't work without it….
How many times have you used this product since you became a LEAD Owner and purchased it?
Twice or three times? But I'm a Sunday mechanic and I definitely need it … lol!
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB, KAWASAKI KLX110, KAWASAKI KSR110, HONDA DREAM50, HONDA CUB type Engine(with Cell motor) of MAGNA50 etc.
with Cell motor is this!
I used this product with CUB50Custom with Cell motor.
I had a puller for no Cell, but I didn't know that it was different from the with Cell motor, so it was an urgent purchase.
I did not find anything to complain about.
View detail
Even if it's used infrequently.
I bought it along with the Bore up of SUPER CUB. At first, I struggled to see if I could not manage the tool I had on hand, but as a result, I should have bought it from the beginning. I thought.
Recommendation
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
People who remove the Flywheel are required to do so
The idea of removing the flywheel of MONKEY-type Horizontal TypeEngine Pinpoint is used The frequency of use is low, but if you don't have it, you can't remove it, so it's an essential tool View detail
I am satisfied.
I used it in APRIOTYPE 2 when changing the oil pump. I tightened the reverse thread by hand, lightly held it down with the Spanner, and it came off in an instant with the Impact wrench. I don't use it often, but I think it is a good tool to have. View detail
Very good
I used it to replace MONKEY's Point and Condenser, and it took a second The Flywheel came off and the Screw is nice and smooth It is easy to use View detail
Very good item
I used it with XR 100 MOTARD.
Making is good, Bolt part can be turned thrill by hand.
I do not get stuck
Because it does not take up space with Compact, there is nothing to worry about the storage place of the tool box
I think that it is the best as a tool of Pinpoint
Of course, Flywheel was securely removed.
View detail
You can use it even if it is cheap.
I used it for Mission exchange of MONKEY.
Some are expensive, but they are necessary enough.
After screwing the Opposite Thread Screw part into Flywheel, turn Normal Thread Screw until it hit Crankshaft and further Glassesetc. Parkin and Flywheel easily come off if you tighten.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Very easy to use, it was a good tool.
【What made you decide the purchase?】 There was something used for NS Engine in Impression, so I decided on this. (Because it was uneasy because NSR 50 was not listed on compatible model)
【How was it actually used?】 Handling Instruction Manual was written in foreign languages ??only with illustration, but it was intuitive special tool that showed how to use so there was no problem.
Moreover, the movement when screwing is also Smooth, and it was able to use with confidence with firmly making it firmly in strength.
The purpose of this time is to remove the Flywheel and adjust the advance angle of the ignition timing.
1) Holder which separately prepared fuller Wheel (Red sticky two-piece fixture shown in the photograph, Hiroche : WT 04141 Universal holder Powerful or the like. Fix) and loosen Center nut.
2) Since the Screw mountain of Opposite Thread Screw is cut inside the Center part of Flywheel, screw the Puller Attachment to the full with manual tightening.
3) Fits the Attachment to the attached crosshair handlebar (The narrowest) I have Screw, so I will screw it in (Normal Thread Screw)
4)MONKEY Wrenchetc. If you do not fix Attachment with, it becomes hard from the middle and it will not turn. (Photo status)
5) When you apply Torque to the Cross Handlebar from that state, Flywheel that is so hard is coming out.
*) Flywheel has a little weight, so please be careful not to drop it. After installation, it is completed by tightening Center nut with 5, 5 Kg-m Torque.
Flywheel came off with a single shot without difficulty.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I did not need a translation, but please translate (Please enter here Instruction Manual handling notation included. I did not understand the use of other Screw parts in the cross Wrench.
【Have you compared items?】 Wes BigGarage Fuller WheelPuller Black Type, but since MINIMIKO is a little cheaper it was here.
It is a good tool, you can recommend !!
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
First time Outer Rotor exchange
Buy for the first time trying to replace the Outer Rotor. Rotor It is an essential tool if you exchange it. I am out of a variety of Manufacturers, but this was the one I chose. I tried using it and used it for Smooth.
There is no turn other than Rotor exchange, but people with Mini bike are essential.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Was helpful.
I bought it to remove GeneratorRotor of CB 750F. With Service Manual, OEM special tool is used, but because it is too frequent to use it, substitute Minimoto's Fly Wheel Puller. The price is also cheaper, Scooteretc. I can also use it, so I thought that I would definitely get it if I think about the future.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
It was used for removing the Flywheel of CB125T. Although a HONDA original manufacturer's product is a price more than double [ this ], the product here can also respond enough. Since it is a Screw size which can use and whose application feels
It was used for removing the Flywheel of CB125T.
Although a
HONDA original manufacturer's product is a price more than double [ this ], the product here can also respond enough.
Since it is a Screw size which can use and whose application feels easy, and is effective also against other vehicle types since there is no element which the
Screw is also minced firmly and licks it, it is satisfied.
If it says by force, since it is a tool (it is troubled even if it is ...) without Yours in haste turn, I will think at what time using for the next becomes.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
This product is what was purchased in order to exchange Flywheels, and since flexibility is also high very in a user friendly manner, it can be used for various Motorcycles. Since it can use for the Mini bike of a Honda system very well, it is convenient
This product is what was purchased in order to exchange Flywheels, and since flexibility is also high very in a user friendly manner, it can be used for various Motorcycles. Since it can use for the Mini bike of a Honda system very well, it is convenient if there is a piece. Although a price is also cheap and being used for a long time after my also purchasing, since it completely broke and does not become precocious, a goods self-object is quite firm goods! Since it can use easily, they are good goods. View detail