Reviews
Fits: HONDA NSR50, HONDA GORILLA, HONDA MONKEY
Used for NSR50
Used for NSR50.
It works fine
View detail
Perfect tool when you only have a 3/8 torque wrench!
Worked like a charm for removing the oil spinner and clutch on my 2019 Monkey 125. I bought this because I only have a 3/8 drive torque wrench and almost all the other lock nut wrenches out there require a 1/2 driver. Would highly recomend if you're in a similar position as me. View detail
For Minimoto's Rear suspension7294
The gold amount is affordable, compact, and has a cover at the hand, which is nice. View detail
It's cheap and can be used with many types.
[How is it used?
I use this product to change the hardness of the Rear shock on my two Motorcycles. I bought two of these products.
Was the one you received as per Image?
Image
How was your experience with it?
Cheap but easy to use
[Points to note]
When you adjust it, you have to hold it with your finger while hooking it to use it. Because it is plastic.
How did it compare to other products?
Fixed Type's size is limited, so I think this one is good for many things.
Other items that would be helpful
I think it would be easier to turn if the hooks were a little stiffer instead of floppy.
View detail
Cosy hook wrench
I bought this because I needed it to remove the Stem when I repainted the Frame.
The deciding factor in the purchase
I was not sure of the size, so I bought it because it was a wide Hook wrench with some fit size and it was inexpensive.
It was a deciding factor for me because of the good reviews of the Impreza.
Impressions of use
When I received it, I was worried about whether I could use it properly because the feeling I saw for the first time was very simple, but when I tried to use it, the hook was firmly put and there was no problem.
In addition, I also used it to remove the Spring to clean the Rear Suspension, which also worked well.
I don't think I use it that often, but it helped me because I can use one for multiple areas.
If Torque is not applied, the Hook is slightly difficult to use, but considering the price, Level is not a problem at all.
Products compared
I compared it with Hook wrench of Tool Manufactureretc. I bought it because I could use it for multiple Size and it was inexpensive and had good in-play evaluation.
I compared with other Site, but this price was the cheapest with wide Type of fitment Size.
【Review】
They are inexpensive but do the job well.
It is good that 1 pc can be used for many Size, because it is only a tool that is not used very often unless the suspension spring is adjusted frequently.
View detail
Cospa best
I mainly use it for MONKEY
Removing the Top Bridge and adjusting the rear suspension are not often used It's just a tool and the price is low
I think it's a good tool to have
View detail
It is easy to use
There are no springs in the moving parts of Wrench, so I was worried about whether it would work properly, but When I tried to use it, when the torque was applied, it stuck properly and worked fine (One hand needs to be used while holding the other.)
I thought that the length of the wrench was about 16cm in Large size and short, but surprisingly, it feels just right! It was
It has good cost performance and works properly Recommendation
AF24Giorno FrontOne'S&M240mm, RearFORSA270mm, both used for 5-step initial adjustment
View detail
Any model can be used
It's for Minimoto, but I could use it for SS from SUPER CUB
Because the size is small, it is convenient to use it in a small place
It's not too much of a distraction to take with you to a course
It's also cheap
View detail
For Rear suspension adjustment and Stem tightening
Purchase for Inarial adjustment of Rear Suspension and tightening of Steering stem.
Since Size is also small, it is not an obstacle to put it in a tool box for carrying in Circuit Size.
For FreeNeck, you do not have to adjust the Hook position depending on the place you use.
View detail
Purchase for Stem
Until now, Steering - I adjusted tops red with hitting hanghang with Slotted screwdriver, but I wanted to graduate from such a weak work and purchased it.
When I actually used it, I thought that it was better to have it after all.
Slightly closed condition is not felt by Slotted screwdriver.
Thanks to this, it has always been decided by one shot that we fine-tune the closing condition as many times as usual.
Although it is a tool with less use frequency, I was keenly aware that it is absolutely necessary tool.
It is recommended because the price is cheap, too..
View detail
Cheap, easy to use, sufficient
At the beginning of the purchase, I felt uneasy about the cheapness, but when I try it, I can recommend it as an Large carpet that is just right for rear suspension adjustment, as an in-car tool. Finishing is complicated, but it would be suitable for the price. View detail
Nice Product. Price is also reasonable. This is made in Taiwan product and nothing to worry. The hardening or heat treatment was perfect as the teeth didn't break while using! The finish is also good & proper for a tool like this. Web!ke also does a great
Nice Product. Price is also reasonable. This is made in Taiwan product and nothing to worry. The hardening or heat treatment was perfect as the teeth didn't break while using! The finish is also good & proper for a tool like this. Web!ke also does a great job in selling & shipping the products worldwide. Note: The pics were uploaded after I used the tool, so it's a bit dirty. View detail
Fits: HONDA NSR50, HONDA GORILLA, HONDA MONKEY
First time Clutch exchange
Buy for the first time trying to change Clutch. Clutch It is an indispensable tool if you exchange it. I am out of a variety of Manufacturers, but this was the one I chose. I tried using it and used it for Smooth. Although it is for manual only, it is Sunday mechanic so we will not use Air Impact.
It is good for Cost performance.
View detail