Reviews
For CUB Oil replacement!
I like this one because it is inexpensive, contains two sheets, and is copper!
The oil can be replaced with confidence because it is properly crushed!
It's essential to replace the Oil in CUB110!
View detail
For ChainSelfMaintenance
I had been doing maintenance of the chain by myself, but I was not satisfied with the results, so I decided to purchase the equipment.
Both parallel and perpendicular can be checked.
Analogous method, but therefore reliable.
I think it is a good item to have, and I recommend it to those who do maintenance of looseness and deflection of a chain by themselves.
View detail
Among the many that are out there.
I chose this product to get Chain Alignment since I changed the Chain of MONKEY125 to Seal chain.
The reason why we chose this type is that there are many types of this type from various manufacturers, but the Screw that fixes the Sprocket to the Material:Plastic, and that was the criterion for our choice.
It is not a good idea to get scratches, no matter how hard it is to see them.
I got a 40cm Aluminum rod separately because the Aluminum rod was too short according to the reviews from other seniors.
I think it is cost-effective if it is mentally satisfying, although I think it can only provide a comforting adjustment.
View detail
It's cheap and there's a lot of it, so don't be afraid to use it.
I bought this for a variety of versatile uses.
For the time being, I plan to use it to wipe down after car washes, spray up simple coating agents, clean Helmet, and if there is any left over, to clean the house.
I thought it was a Small one after reading various Reviews,
It was a bit larger than I expected, just enough to cover the top of the helmet. (I'm posting a picture.)
The texture is the same level as that of common micro fiber,
It is not of a particularly high quality, but I think the strength of the Largeest is that you can use the GunGun without hesitation, and it does not get scratched easily even if you wipe up the Cowl.
I would buy it again when it runs out.
View detail
Large satisfied
I used it with RigidMONKEYZ50Z and it is very good.
As expected, it is designed for the 4mini and is very easy to use.
I regret that I should have purchased it earlier, but I own several MONKEYs and will use Large for maintenance.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Pink Glamorous Fuel hose
I bought myself a pink transparent hose. I liked it because it is transparent and pink - you can control the availability of fuel in the system, and the pink color gives charm to the motorcycle. Hose dimensions: outer diameter 7 mm, inner diameter 4 mm. I bought myself a pink transparent hose. I liked it because it is transparent and pink - you can control the presence of fuel in the system, and the pink color gives charm to the motorcycle. Hose dimensions: outer diameter 7 mm, inner diameter 4 mm. View detail
Fits: HONDA DAX, HONDA GORILLA, HONDA MONKEY
It's working just fine
I can use it normally as Exhaust Gasket. No problem at all. View detail
Used to convert 6V vehicles to Clear blinker
[How is it used?
[Color] I changed to ClearEuropean Blinker and needed Orange bulb.
How was your experience with it?
Works fine. Unlike the cheap Orange bulb, the paint was well done.
How did it compare to other products?
I'm afraid you don't have to worry about 6V Orange bulbs because there are very few options.
View detail
Thick copper
I usually buy in bulk, but I had to adjust for shipping costs.
I prefer copper to Aluminum.
It is quite thick. It may not need to be this thick.
I replace them every time, so it is easy to purchase.
View detail
Used when changing oil in BULLET's Heritage 125
I used this for the first oil change on my Heritage125 (a rip off of the old DAX) made in Belgium by BULLET. I mean, I don't have a service manual, so I'm not sure if I want to replace it with OEM or something else, so I'm thinking of DAX70.
Is the original DrainCook packing copper to your liking? I could have used Aluminum separately, but I'm not sure what the difference is, and it's the same price …. Well, I tried it out. It works fine, so I guess it's OK.
View detail
Cheap and good.
I usually use OEM Products, but since they are disposable, I decided to go with something inexpensive.
The quality is fine and I think I will Repeat until I find something else cheaper.
View detail
Used for Dax125
I use it on my Dax125, 12inch size and I was wondering if it would be Large sturdy, Large is Reasonable and I was worried about the quality, but it was no problem at all. I was worried about the quality, but it was no problem at all. I would like to consider the for Front next time. View detail
No Color inferior to OEM Product
The OEM Product was out of stock, so I bought this one instead, which is compatible with it.
I changed it together with the drain bolt to match the oil change, and had no problem at all installing it, and I thought it would be no problem at all here if the OEM Product was not available.
The only drawback is that the bag is difficult to open.
View detail
Cleaning brush!
Large sturdy, even when left on kerosene! View detail
Compact
Purchased to cut a Chain that was purchased with the wrong number of LINKs.
It is very compact.
View detail
Fits: HONDA SUPER CUB 90, HONDA APE 50, HONDA APE 100, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA MAGNA 50, HONDA LITTLE CUB, HONDA DAX, HONDA MONKEY R, HONDA JAZZ, HONDA NSR50, HONDA MONKEY, HONDA GORILLA
[Be careful. It could not be used for cars equipped with BigDrum.
On the webike Compatible Car Models I have read that it is possible to fit the last model c90 with BigDrum.
If you are purchasing more than one item, please contact us for the delivery time. If you purchase more than one order, please contact us for the delivery time. "All the materials used are right in front of you." If the goods are laid out and then worked on, acceptance is very often performed on the next vacation or two following the day of the slowest delivery. 。 When discovered, a situation will occur where the return date will pass.
? Almost no problems are encountered in the acceptance inspection process in the case of the exterior 。 However, in cases such as the Drum Brake Shoe, which was only discovered after disassembling the motorcycle, I felt the need to check impressions and youtube comments at the same time. 。 This time, we will release it to Mercury and respond.
View detail
Stable products
Stable product. Good quality. View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA MONKEY125, HONDA DAX, HONDA CHALY, HONDA XRMOTARD, HONDA CT125CT110 HUNTER CUB
For RearMaintenance & Motorcycle Storage
Used on a Grom JC92, absolutely necessary for RearMaintenance.
I am satisfied with the low price and the make of the product.
View detail
Used for Clutch Cable!
Used for Clutch Cable of GB250 CLUBMAN.
I used an injector because the lubricant would fly out if injected as is. The GB250 CLUBMAN is not a heavy clutch, but it feels smoother. If you have an old car and the clutch is heavy, I recommend you to use Injector because the lubricant will spread to the whole Cable.
View detail
Convenient Quantity:Set
CT110 HUNTER CUBCT110, purchased for 12V conversion.
It is a very nice product because there is no need to examine them one by one.
View detail