Reviews
Large satisfied
I used it with RigidMONKEYZ50Z and it is very good.
As expected, it is designed for the 4mini and is very easy to use.
I regret that I should have purchased it earlier, but I own several MONKEYs and will use Large for maintenance.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
MONKEY125 beware.
Purchased for maintenance of MONKEY125, such as oil replacement.
Be careful when lowering.
If you lower it too vigorously, your hand may get caught between the Arm of STAND and the License Plate.
Hands get caught, License Plate gets bent….
but with great strength and stability.
View detail
Used for Dax125
I use it on my Dax125, 12inch size and I was wondering if it would be Large sturdy, Large is Reasonable and I was worried about the quality, but it was no problem at all. I was worried about the quality, but it was no problem at all. I would like to consider the for Front next time. View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA MONKEY125, HONDA DAX, HONDA CHALY, HONDA XRMOTARD, HONDA CT125CT110 HUNTER CUB
Lightweight and just right for groms.
It is tiny and ExactlySize for groms.
I just put Swing Arm on it, but it is stable.
(Caution!)
Normal rear fender will cut your finger on the License Plate if you are not a little careful.
I will try Fender Eliminator one of these days.
View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA MONKEY125, HONDA DAX, HONDA CHALY, HONDA XRMOTARD, HONDA CT125CT110 HUNTER CUB
For RearMaintenance & Motorcycle Storage
Used on a Grom JC92, absolutely necessary for RearMaintenance.
I am satisfied with the low price and the make of the product.
View detail
Fits: HONDA MONKEY, HONDA APE, HONDA CT125CT110 HUNTER CUB, HONDA XRMOTARD, HONDA CHALY, HONDA DAX
Rear Maintenance Stand NORMAL
Rear Maintenance Stand NORMAL
I could not use it on my Grom JC92. The description reads like it would be compatible with NORMAL, though.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
Perfect for the MONKEY125!
It is essential for maintenance. I'm glad it's cheap. Durability is unknown. View detail
There's more to it than meets the eye.
I bought this because I plan to replace the front tire on my XR100. I was surprised to receive it and hold it in my hand. With such a simple structure, can it support the body of 108kg for many days? I inserted it into the frame pipe and put the foot Quantity:With only 2pc supports, front and back Quantity:Pair (for Left and Right) Can it absorb the force of action in 4 directions? I removed the Tire and supported it for 5 days. Since the pipe is so thin, it seems that the external force can be absorbed by the deformation of the pipe itself. When I lifted the car body, it was easy by the principle of leverage. It is a good purchase that betrays the first impression. View detail
U-shaped hook
I know it's a series of pitches, but I installed the RIDEA RIDEA Stand Hook yesterday and used it with a U-shaped hook.
It's more obvious than Swing ArmType, but it's totally stable.
However, it interferes with the bolt for hook fixation when the shaft is removed.
I removed the Bolt at that time because it won't come off once it's fixed in STAND.
U-shaped hooks can be used normally, so this is more PointUp than the last one.
But I still think it's too hard for a car with a lot of weight.
View detail
It's not easy to use with Swing Arm.
I bought it for the MONKEY125.
First of all, one hole in the Button bolt with a hole to stop the Tire was filled in.
I managed to install it with Pliers across the head.
I didn't have a Stand Hook, so I fixed it to the Swing Arm, but it was slippery and slippery.
In addition, it's not very strong or bouncy.
I don't know how much the Stand Hook & U-Shaped Bracket will improve it.
I don't think it's useless for heavy duty vehicles as even MONKEY is bendy.
It's priceless.
View detail
Used for MONKEY, DAX, CHALY, etc.
The picture is a lifted state with MONKEY8InchSpec.
The Tire is about 10cm up.
It's stable enough for lightweight vehicles and easy maintenance.
View detail
Used for MONKEY, DAX, CHALY, etc.
The vehicle is so light that I don't think it would be a problem without the Roller.
I didn't care for the color so I went with Red, which is in stock.
I'll have to wait and see how the moving parts of the receiver hold up.
In the meantime, I don't regret my purchase.
View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA MONKEY
Required for maintenance.
MINIMOTO MinimotoHorizontal Engine Maintenance The Stand Multi Type has arrived and I'd like to give you a quick in-play of how it feels to use it.
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
If you are considering purchasing a similar product with a similar
I don't think it's a good product to buy.
View detail
A little more quality control;
First things first
The construction is solid and normal
Cosmetically, rave reviews
Just paint & hellip;
There were places where it looked like the paint had been partially over-sprayed and cured in a foamy state, and I inadvertently My hand hurts when I grab it there
I thought I had to apply Paper to the paint from new to even it out
The part of Swing Arm ride, the paste is yellowish GBond The glue of the
Is there any other way, or at least don't stick out?
The Handlebar part that can be held by hand when standing is also a good idea, but it's a bit pricey If you think it's appropriate
View detail
Safe during maintenance!
I used to use two Uma for Vehicles, but they were not as stable as they could be
I have been able to maintain this STAND with peace of mind since I purchased it I should have purchased it sooner!
When you are not driving your car, you can put it on this STAND and look at your car to see the atmosphere in the garage I think the first time I saw it, I was able to buy it I can buy it for 1299 yen in real terms because I used webike's Point, and it is very I was grateful for the
This STAND is a mini type, so you need to lift up your rear and put it on STAND So the body of GORILLA is light, but the body of the GORILLA is caught in Smooth You may not get on the
View detail
To attach a vertical carburetor to MONKEY
I used it for 5LMONKEY at 12V
Down draftcarburetor (commonly known as the vertical) used in the old SUPER CUB (carburetor) I really wanted to try it on, and when I tried it, the gap between the Frame and I bought this one because I have very little and I can't physically attach a Power Filter or anything else to it!
The performance of SPTakegawa's Sponge type is more important than the performance of a short funnel It's like I bought it to put an Air Filter on
Therefore, it's not like the power went up dramatically or the high RPMs came around because of this I don't know
Still, it performed the function I needed it to perform well
I also thought the machining accuracy was high
I chose Gold alumite due to stock availability, but Black Anodized and regular It would be nice to have Silver anodized as well
It also has a split collar for the connection to the Carburetor It was, but not necessary for the vertical carburetor
Will it be necessary with a PC20 or something like that?
View detail
I think this quality is good for the price!
I think the quality is good for the price
But it seems to be too much for a car with a large chassis
Just right for MT-03
Brake, Chain, Sprocket, etc
I think it's necessary for those who make maintenance better
I'm not using the Front
It looks fine
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
It's good and well done for the Gold amount
Maintenance for MONKEY125, good height, chain and Tire, no Center Stand for foil maintenance Motorcycle Necessities View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
The price is reasonable, well built and satisfactory
I use it for groms with the width as wide as possible, but it's well made and easy to use for the price It's easy
It's good strength and doesn't wobble
View detail
Oh well
I use it on the Grom 1 and it hits the bottom part of the headlight a little as it is It is not impossible to use it, but I extended it by welding the insertion part of the headlight It's ready to be used in a batch View detail