Reviews
In the Chinese VM Setting
[How is it used?
For some reason, Throw of Chinese VMcarburetor has this Type, so I used this one for setting.
Was the one you received as per Image?
The Sponge dividers were quite nice compared to the usual divider-only Packages.
It is good because Jet does not mess up inside.
Was the installation difficult?
Accuracy is adequate. There were no problems.
How was your experience with it?
Smallest SizeQuantity for SmallEngine Displacement Volume:I thought that with Set, I could Cover all of the Setting range.
It is said that OEMs are more accurate and better for jets, but if the mother company is a Chinese carburetor, I don't think it will be a problem.
[Was there anything that disappointed you?
None in particular
View detail
Perfectly designed
[How is it used?
Purchased for MONKEYZ50J.
I wanted to install a MikuniVM22carburetor, but it interfered with the Tank, so I bought an Intac Manifold Variable Attachment. I thought it would be a good idea to buy a Minimoto product for the time being.
Was the one you received as per Image?
I thought it was as shown in the Image and well made, so I thought it was worth the price. One thing I did not expect was that the variable attachments were thicker than I expected.
Was the installation difficult?
Installation is simple:simply mount it with the depressed side toward the front of the vehicle and fasten it with the included dish Screw.
However, the included countersunk screw was too long and could not be tightened, perhaps because it was a 4LMONKEY, so I bought a shorter countersunk screw separately and installed it.
How was your experience with it?
It has been working fine with no leaks.
The carburetor in question, however, I managed to install it.
However, the thickness of the variable attachment is quite thick, so I tried various angles, but it was too high and interfered with the tank, so I could only use it in a certain direction.
Even in that direction, there is some interference with the tank when the chalk is raised, probably due to the structure of the carburetor. At any rate, I am glad I bought this Attachment because without it, I would not have been able to install the carburetor.
[Included Parts:were they on?
Attachment that matches the inside diameter of the Gasket and intake manifold?
[Was there anything that disappointed you?
The thickness is still Neck. It is well made, but it would have been 5 stars if it were thinner.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Used for PWK28.
Used for Chinese PWK.
It's a Jet, so there's nothing to write home about it, but it's cheap but made with precision.
I can use KEIHIN-compliant Jet for Chinese PWKs, which is very useful.
I think it is a necessity at the time of Setting.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund
Good cosmetics!
[How is it used?
We decided to purchase the carburetor to replace the carburetor along with the Bore up.
Was the one you received as per Image?
Quality was not bad and comparable to domestic carburetors.
Was the installation difficult?
Without a swivel Adapteretc., the large body will interfere with the Engine.
How was your experience with it?
It also runs in the Setting there.
Main should be around 100, and Throw may need to be raised a little from NORMAL 15.
It is definitely easier to Set up than TM24.
[Included Parts:were they on?
Nothing else in particular.
[Was there anything that disappointed you?
I was disappointed that the Jets were Minor and could not be diverted.
▼Recommendation is made because it is inexpensive and has a large diameter compared to PC20.
View detail
Quantity of Mikuni Maru Large:I was going to buy a Set and this is what I got.
Quantity of Mikuni Maru Large at POSH and other Manufacturers.:I think there was a Set, but before I knew it, there was only Minimoto, and while there are plenty of options for KEIHIN and other Jets, there are no less than Mikuni Maru Large.
By the way, for some reason, Mikuni Maru Large is just right for Dell'Orto's carburetor.
Jet will have a bigger hole due to wear and tear, so even if you don't change the number, let's replace it.
View detail
KEIHIN PC18/20 Pilot Jet 6-size Set
About quality and texture Quality, product finish, product composition, everything is good About the feeling of use I am setting the pc20 now. Because of the good configuration, more data can be found. Products to buy together pc20 Carburetor Difficulty of installation It's easy. We have to deal with the leaking gasoline Cost performance and comparison with other products Because it is made in Taiwan, I think the cost-effectiveness is excellent About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing I recommend you to buy it as a set It is cheaper It is made in Taiwan but the quality is really good, so the price is the best View detail
carburetor
I was very impressed with the Setting just by pimping it to the Bore up engine. View detail
APE 100
Choosing MINIMOTO Aluminum Buffing Finish Carburetor was a great choice and I recommend it because it is cheaper than NORMAL ITEM. -------------------------------------- Choosing the Minimoto Aluminum Buffing Finish Carburetor has a great choice and is cheaper than the Normal item. Powered by Google Translator View detail
KEIHIN PC20
I bought it while installing a friend APE100 DAYTONA KEIHIN PC20 ------------------------------------------------ I bought a friend APE100 Daytona Keihin PC20. I also purchased SP TAKEGAWA products, but this product is more adjustable, so it's easier to adjust. Powered by Google Translato View detail
To APE with PD22 installed!
Used for Engine of APE100YOSHIMURA115carburetorPD22
Considering the sudden rain, I thought I'd stay dry.
If you're looking for a Filter with a 45 degree bend, this will work!
I used three Nitrile rubber O-rings of slightly larger inner diameter in the carburetor as spacers and Exactly
With this, I was able to install the Side coverSmall and the heat shield between the carburetor and the Filter to prevent rain!
View detail
OKO's PWK24 for oil level adjustment [Color] ClearFloat chamber
Purchased for oil level adjustment of pwk28
I can see the condition of the oil surface, so it was very convenient.
View detail
Fits: HONDA CHALY System Engine, HONDA SUPER CUB 50
for PC20.
MINIMOTO's PC20 Same SizeCarburetor (https://www.webike.net/sd/23872858/)
Also MINIMOTO's Monkey Type Z Full Kit 88cc Type S Cylinder (https://www.webike.net/sd/23872950/)
We have installed this kit on the CUB50 with these two components.
The caliber was the same size as the above two products. It may have been designed for simultaneous installation.
It is a problem whether the OEM air cleaner box can be installed, but it can be installed if some ingenuity is done.
You can either make a Bracket (which will be higher than the OEM Manifold) or you can use a Tie Wrap, which everyone loves.
This price is the MINIMOTO feeling with the Spacer that puts it between Gasket, carburetor and Manifold. It is too good value. Even if the inside casting surface is rough, it can't be helped. If you are worried about it, you can polish it.
View detail
Air cleaner with cover
Installed on pc20, which was a direct carburetor
It looks like the parts have been replaced with Balibali's Plating.
Large durable in sudden rain with all-weather cover (LargeIf it rains, I'm worried.)
Inhalation sound is the level of not to be bothered thanks to the cover. (I've been a direct carburetor until now.)
Although there is the ease of getting out of the setting of Pc20, I was able to get out of the setting without any difficulty.
Durability is … well, it's a regular replacement, so it's probably enough in this price range.
I heard that the Screws will come off after a while of driving, so I'll use Bond to harden them.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund
Easy to use
This carburetor can run from 88cc to 125cc with no complaints. For now, I think it's good enough to see how it works. It's good as it is, and it will get better if you add some settings, so I recommend it for beginners. I tried various Carburetor, but now I use Carburetor for all CUB engines.
You can use the included Manifold for Solo, but you can also use the opposite Manifold for the CUB to make it fit better.
One thing I regret is that it's called the Carburetor Single Item and it comes with a Manifold for MONKEY, so it would be nice if they could sell it a little cheaper for this. I have a lot of Manifolds lying around in my place right now.
View detail
Mikuni for your peace of mind
I bought the Carburetor because I prefer to use Mikuni products.
It's used on the SUPER CUB70, but it's stable acceleration at full throttle of Axel, which is just like Mikuni. The setting of low speed is very difficult.
I think it's a very good carburetor, along with a good costumer.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund
It works normally
I bought it to use in my SUPER CUB
This is while I Bore up to 88cc
I know the PC20 is good, but when I try to buy the original KEIHIN product, I get the admonition I chose this one because it flies flat
It doesn't seem to be made by the so-called MIKUNI of Japan
The body is stamped with "JAPAN T/A", which is a technology from "Japan It represents cooperation" yes, it does
I've been trying to figure out what it stands for "Technology Alliance But what do you think? LOL!
To be honest, they don't mind imprinting the original on the copies in other countries I know, right? lol
However, it is getting tougher and tougher to import products that disregard copyright, so it's a fake I believe it's not a thing
To begin with, just because it's a Japanese company doesn't mean that everything is Japanese It's not unusual to see corporations (such as DENI, which was KEIHIN in Taiwan) with brand names and I think it's a bit outdated to look only at the country of manufacture …
It worked fine as a product
It runs surprisingly well even with a fair amount of setting
I just think you should be careful about just buying jets and the like
Some of these carburetors use different types of jets in different lots and so on So if you only believe the information on the Net, you may fail to make a purchase
Take a good look at the Jet on your carburetor before you make your choice
Be especially careful with the Pilot Jet
View detail
PC20 is next
I was using a PC20 but for further power up, I was using a VM22
However, the setting did not come out, and I think it is more than Mikuni I'm a KEIHIN guy, so I switched to this one
This too, as well as well-written on the Net about Chinese carburetor T/A Japan It was an engraved object
Just like an ordinary KEIHINcarburetor "KEIHIN It is also engraved Also "Made in China It's nice and graceful that Seal of the company is putting up lol
The construction is somewhat beautiful The appearance is not inferior to the original
There is no problem around the float packing inside, but you should remove the Jet once and clean it is a good idea
I was a little reluctant to remove it around the Jet and found a piece of SmallSana BALI
The Jet itself also had some scratches at the bottom that looked like it had bottomed out, so even though it's the same count, KEIHIN OEM I feel more comfortable changing to the (The jets were common to the original PD22.)
By the way, I use it as RemoteChalk
Since the NSF100 OEM Parts Cable can be used by pontooning it, the vehicle with Cowl If you can't access carburetor directly, you can use Recommendation It is
View detail
Well made manifold, very good value for the price
Very nice long manifold that provides a little more induction and top-end power than shorter manifolds. This fits the OKO/KEIHIN carbs perfectly and it's a great item. I took a change and bought it for my VM26 (even though it's not made for that carb), and it does fit the VM ok, but not perfectly because the stub on the VM is a little longer than the OKO/KEIHIN stubs, so there will be a little gap on the outside between the rubber flange and the carb body. The grove inside the flange doesn't either match up with the VM stub. But again, this manifold fits the OKO/KEIHIN carbs perfectly. My only complaint is that it's a tiny bit oval inside on the carb side. This may be a production "glitch" only on the one i received and not all of them... I totally recommend this item! View detail
After installation, it is about 100 km running ...
Installed in Yamaha XG 250 TRICKER 04. Normal cab is too heavy Setting is difficult to set out I get sick at the altitude but it gets worse so I troubled and decided to wear it
First of all it's almost like pounding. Since the diameter of the intake manifold is slightly small, it will be stuck to it unless you attach it as thick as it will be thick but secondary intake will take place from the clearance. I am a bicycle Rim Band (Paste Type) I rolled around three laps and gave it. It was perfect. Air cleaner side will be attached without problems if you tighten it tightly.
Since Accelerator Wire will be reduced by one, exchange. We will use the price but use Bent High Throttle Kit from TAKEGAWA. This Wire, the attached cable length is only 680. If you do your best at Gili, I will reach you, but I will cut Handlebar. Here is another option to buy Cable 880, sold separately. (This already exceeds the price of carburetorSingle Body)
Tank installation is a carburetor's Top wire and bottom of the tank come into contact and it looks like a bad feeling that makes it look very different. I tried at this point, but I did not interfere with Wire in particular.
Who cares? (Including me) If you install the Bent Top Cap made by TAKEGAWA again, it will be Refreshing. Kitchen gets bent to 90-degrees. Instead it is amazing price
Setting is POSH Faith : 700030Pilot Jet Set for KEIHIN PE28 / PWK 28 Carburetor 35 #
Main jet, but POSH Faith : 700002Main Jet Set for KEIHIN PE24 / 28 / PWK28 / FCR Carburetor Body Carburetor ← This is not attached. Float will not close unless you use a thin type Slotted screwdriver to remove it. I caught on Copy's Logic. I think that I entered 125 # with certainty.
Clip is in a state of wait by stepping down one step.
Smooth has been decided surprisingly from the bottom to the top on running on public roads. Normal cab 70 to 80 visits Torque fully Smooth without bumps.
After that it is how far we can use with forest road AttackTouring. I would like to match with a low speed TRIAL ride instead of Speed ??emphasis. Tight Hill climb also listened quite nicely. The Axel reaction was also agile and the rock and log crossing became considerably easier.
I think that Axel from the 2nd speed low speed is a little dark, so I think I should return the Clip to the middle.
Where will you have more at this price!
View detail
Strong operation feeling
I bought it because it was necessary to adjust the Pilot screw when exchanging to the Exhaust System of the Full Exhaust System, but I do not have any special after-fire so far, so I have not used it yet, but the quality itself is a solid feeling is. View detail