Reviews
DAXAir cleaner
Good cosmetics,
Mounting Bracket Location OEM and
Spacers are not required because of the difference.
View detail
ThrowSetting is difficult with 85cc.
I installed it for Replace because the overflow of the PB16carburetor in CUB90 was just not improving.
The pitch on the manifold side is the same and the carburetor will be attached as is, but the air cleaner side is 1.5mm shorter in diameter and the carburetor length is also shorter, so it is necessary to take some measures such as wrapping something around the carburetor.
Also, since the cook will be lost, it is necessary to add a 2-way cook with Reserve.
Since the Outer cable of the Accelerator Wire strongly interferes with the Main frame of the CUB, it is better to take some measures such as pivoting it slightly.
The thing itself is very good and accurately made.
The difficulty is that it is hard to set the SmallEngine Displacement Volume. 85cc CUB90 does not idol properly.
First of all, the notch at the bottom of the throttle valve is too large for the engine displacement volume, and the idle speed does not drop to about 2000 rpm. Setting does not come out this time.
It seems that the design of the Throw path itself does not match the Engine Displacement Volume, not because the bottom of the Valve has been cut off.
Idol is light on Brown, while 1/8th open is dark on Brown. This is a strange Setting, so it seems tough to replace the SJ that takes care of this whole range.
I have no choice but to give him the fuel mixture to match Idol, and it is like meditating on a thick 1/8 opening.
The 1/8 opening range used relatively frequently in city driving is thicker, so city driving fuel economy deteriorates slightly.
This is only when using 85cc, and once you get to 108cc, it becomes almost a non-issue.
The city driving fuel consumption is not too bad. This was confirmed by replacing the 85cc and 108cc Engines twice.
I think 125cc would be no problem at all.
From my research, it seems that it is not limited to Minimoto products, but PC20 itself is generally like that.
Therefore, we recommend using 108cc or more whenever possible.
Again, the product itself is good, no trouble after more than a year of heavy use.
View detail
Fits: HONDA SUPER CUB 90, HONDA Super Cub 100 (Thai Cub), HONDA Super Cub 70
subtle
I bought this for my SUPER CUB90.
I'm not complaining about the Jet, as it was explained to me that it has a different count.
The biggest problem was that the float valve was not the right shape.
In the end, the Float valve was purchased separately, so the Quantity of Packing only.:I should have bought a Set.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund
It's Chinese, so it's probably like this.
It's cheap, but the processing is not good at all.
However, it is not so that the performance is not good, and I do not know well because it is after I fix it by myself, but I can use it normally.
You might be better off buying a cheaper Chinese product from Large Hand Mail Order Site.
View detail
Instead of an OEM Product!
I got the DAX from a friend of mine, and this is a big 88cc with a Bore up It was a cab air funnelSpec It was cool enough as it was... but I still like the OEM look decided to replace the carburetor with a PC20 and replace it with this air filter!
The airfuel itself is fine, as is the detail in other people's Impressions It's just fine! It's cheap! LOL!
Once you put it on, you don't have to worry about the details! expected to be
I thought it would be easy to put the Air Filter for DAX on the DAX! is PC20.... It wasn't so easy to get the carburetor side of PC20 size I added KITACO's Joint funnel to adjust the size of it and then I was able to get a better fit The Air FilterBody managed to install with a bracket
It came on like that, but it's pretty fluffy lol
But it looks like it, so let's call it good! Because it's cheap lol
The performance itself How is it? As far as the performance of the Filter is concerned? There are a lot of parts of it that are...cheap, lol
It needs some work to install, and I don't think it's number one in terms of performance, but It's okay.. It's okay! It's cheap!
I can't recommend it to complete beginners, but I'm sure you'll find a way to make it work If you like things to be attached, you should try it
View detail
It's cost effective compared to OEMs
The OEM product is too expensive to buy, so we can't afford this Universal Buy Product
The surface paint and details are crude, but it's cheap, so it makes sense
View detail
For mounting pc20
When I tried to attach pc 20 to MONKEY, I used it instead of Spacer because I hit Cylinder, so I used it instead of Spacer! I thought it was Screw of Plus but it was Screw of a hexagon hole! Personally I hate Screw of Plus So it was nice to be here. View detail
It is common. if it attaches to the place shifted one from the transverse plane, a gasket will not hit -- w -- common except it
It is common.
if it attaches to the place shifted one from the transverse plane, a gasket will not hit -- w -- common except it
View detail