Reviews
Fits: HONDA MONKEY, HONDA DAX, HONDA CHALY 70, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Product # 3181
I need to have the clutch serviced on my Monkey. Once the right side of the engine is opened, the gasket will need to be replaced. This is my first time purchasing this product, I hope everything goes well. First, I can note that I liked the workmanship and material, and also liked the packaging of this product. View detail
Fits: HONDA GORILLA, HONDA DAX, HONDA MONKEY, HONDA CHALY 50
Recommended
Purchased to replace Camshaft Cover!
Not bad!
View detail
Fits: HONDA CHALY System Engine, HONDA SUPER CUB 50
MINIMOTO Kickstarter
MINIMOTO kickstarter
Hi all! Great kick, bought it already for previous mopeds. This time I bought a Little Cub for a Honda, it fit just fine. Good coverage, gum, no complaints. Particularly pleased with the normal price.
Hey all! Great kick, bought it already for previous mopeds. This time I bought a Little Cub for a Honda, it fit just fine. Good coverage, gum, no complaints. Particularly pleased with the normal price -------------------------------------- -------------- Minimoto kikstarter Hi all! Excellent Kick, purchased it already for previous mopeds. This time I purchased for Honda Little Cub, just came up wonderful. Good coating, elastic band, no comments. The normal price is especially pleasing. Hi All! Great Kick, Bouught it Alread for Previous Mopeds. This Time I Bouught a Little Cub For a Honda, It Fit Just Fine. Good Coverage, Gum, No Complaints. Particularly Pleased with the Normal Price Powered by Google Translator
View detail
Cospa strongest
BALIetc. somewhat, but considering the Gold amount, awesome! View detail
just to be sure
I used it on a MONKEY that overhauled the Engine a while ago.
Replaced from OEMBolt at the time of subsequent Oil replacement.
No iron powder was found in the discharged oil, but we installed it just in case.
Reinforcement Type was applied to the other MONKEY.:I made it Aluminum
View detail
Fits: HONDA MONKEY, HONDA Shirley 50., HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BENRY CD50
It gives me peace of mind!
Used for SUPER CUB6VCamouflage MeEngine.
We replaced it at the same time when we installed the KITACOLight bore up88cc.
A 2mm Drill blade is also included, which is very kind.
I was afraid that it would fall through, so I put the blade on the Drill and turned it by hand to Penetrating it.
I am not sure of the effect, but I feel that the temperature of the Engine is stable and I feel more secure.
Since the clutch needs to be removed, we recommend replacing it with a reinforced clutch at the same time.
View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA CHALY 70, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
It can be used without modesty with OEMs.
The color is different from the OEM, but I think they are exactly the same. I don't know about the durability, but it is sufficient for my needs. View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY 70, HONDA DAX, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
What you need when you power up
Installed on MONKEY I was relieved to get Silver.
I was surprised to see Aluminum when I thought it was Steel.
Aluminum welds are rough but not performance related and the product is small and the price is satisfactory.
I don't want to add an Oil cooler or a kyatch tank if I can help it.
You may not like it when you power up, but you need it, and it's easy to install.
A little troublesome to install discreetly.
I like that Webig offers free shipping and careful packaging.
View detail
Fits: HONDA DAX, HONDA MAGNA50, HONDA Jazz, HONDA CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA MONKEY, HONDA GORILLA
Tune to Normal piston.
I used it to try to match a KITACO High-compression Piston, but the Tappet sound was so bad that I changed it to a …Normal piston and it was back to normal.
Apparently, it should be considered for Normal piston.
good point
Normal engine can be used for higher RPM.
It is not as good as KITACOSPL, but it turns okay.
Hill climbing performance is also good.
Cheap.
A bad point
Cannot be used for High-compression Piston.
The width of the Engine Spec. is narrow.
I think it is good parts if you want high rpm and high speed with normal engine.
View detail
Fits: HONDA CUB90, Others , HONDA MONKEY, HONDA DAX, HONDA CHALY 50
As a good luck charm for Engine
MONKEY had to open Engine several times due to a combination of bad luck.
I have not had all of the cylinders and pistons reassembled in a long time, so I took this opportunity to replace them with OEM drain bolts.
Until now, I thought it was almost a matter of course that every time I changed the Oil, there would be a little or a lot of Gold powder mixed in, and I wasn't even sure if it was Aluminum or Iron.
However, the slightest thing could cause an unexpected trouble, so I installed it as a talisman for that purpose.
Material:There were aluminum and steel options, but we chose the stronger steel.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
It's cheaper than OEM and the quality is good enough for a compatible product.
This was used for DAX engine overhaul.
As you can see in the picture, there is no difference when placed side by side with the OEM Product.
I think it's a very good deal because of its low price.
View detail
Fits: HONDA CHALY System Engine, HONDA SUPER CUB 50
Kik.
Installed on a 1997 Honda super cub custom. Outwardly, everything is worthy. The size is slightly smaller than the original (details in the photo). It sticks out more than the original, far from the exhaust pipe. In general, you can take it, but be prepared for some inconvenience from the fact that it sticks out. Affected by the fact that it was originally intended for the Honda Monkey. During operation, I do not recommend making great efforts, since it is not known how non-standard geometry will work. I am satisfied. View detail
Fits: HONDA DAX, HONDA MAGNA50, HONDA Jazz, HONDA CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA MONKEY, HONDA GORILLA
It'll turn a certain way.
The high RPM shit clogging feeling is gone. It's pretty fun. Maybe it would be better if I changed the ignition timing.
The quality is not so good, there are some bumps in the Cam pile and I had to grind it with oil stone, and the noise is getting bigger.
View detail
Fits: HONDA DAX, HONDA MAGNA50, HONDA Jazz, HONDA CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA MONKEY, HONDA GORILLA
It is not bad
The top of Cam's mountain was angular, so I polished it with oil stone. The effect is that the carburetor with VM16 has fattened up the Torque above the mid speed range. It doesn't mean that I can climb up the hill with one step higher GEAR, but it's fun to do! View detail
That could be good.
I installed this on my GORILLA 88 6v car.
The engine is a 110cc vehicle after replacing the cranketc.
I used it for SHIFT UP 52mmCylinder.
It is a little thicker than KITACO and SHIFT UP, so I use SHIFT UP's aluminum cylinder gasket for Quantity.:I dealt with it by using 1pc. liquid Gasket because I want to reduce OIL leakage since it is Aluminum Gasket.
If you order a Gasket from another Manufacturer, the unused Gasket will be stored in the Quantity:This time, I can get only the Gasket which I want to use for around 500 yen, which is very helpful.
As for the feeling that I used it, the feeling of Minimoto until now seems to disappear, and it plays the role of the Gasket firmly, because I exchange Piston ring, Pin, and so on, I ran 400Km under 8000rpm for Ring break-in, and there was no Oil leak at all. I hope the durability at around 12000rpm by replacing these oil.
View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA DAX
Cheap but high quality
[How is it used?
I had a KITACO 75cc light bore up kit, but I was dissatisfied with the 75cc bypass and the amount of air I could breathe with the normal head, so I decided to build this product.
No other company has this price with Big head.
I was worried about that price, but it arrived better than I expected.
Was the one you received as per Image?
The quality of the details was higher than Image.
Was the installation difficult?
KITACO's "Tora no Maki" is included in the package, so it's a piece of cake to build it while watching.
Valve clearance can be found on Minimoto's Home Page. (https://www.gl-trade.co.jp/minimoto/q-a/engine/post-189/)
IN 0.010-0.035mm
EX 0.030-0.055mm
How was your experience with it?
I haven't ridden other 88cc kits so I can't compare, but it's a lot faster.
[Included Parts:were they on?
It is a full kit so it comes with many things. There is nothing you need to buy. However, there are many parts that should be strengthened, so I summarized them below.
[Was there anything that disappointed you?
None. More than expected.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
MINIMOTO, Power Oil Pump Kit for 12V (https://www.webike.net/sd/20022091/)
SPTakegawa, Reinforced Centrifugal Clutch Kit (32-Weight) (https://www.webike.net/sd/542939/)
DAYTONA、Reinforced Camshaft Chain (EK25HS) (https://www.webike.net/sd/526322/)
SHIFT UP, Stud bolt set (https://www.webike.net/sd/1859349/)
MINIMOTO, PC20 Same SizeCarburetor (https://www.webike.net/sd/23872858/)
We incorporated this one at the same time. It's easier to know it all at once, and you can see the synergy.
Super zoil, SUPER ZOIL Gold genus surface modifier blended and lubricated Spray (https://www.webike.net/sd/46517/)
It is good to Spray when assembling. It makes the initial blending better.
View detail
Used for MONKEY, DAX, CHALY, etc.
I'm glad I went with Magnet every time I changed the oil.
Even if you change the Oil every 1000k, it still has a fair amount of iron dust on it.
You won't be able to experience EngineDamage, but I think it's something you should put on if you're attached to the vehicle.
View detail
To the DAX.
I have them on every 4mini I own.
I feel sorry for the Engine when I see iron powder when I change Oil.
If you don't care, you don't care...
I don't think anyone would mistake it for the Bolt from Camshaft Chain, but with Color is more recognizable lol.
View detail
After the Spacer device!
Because I put a Spacer in the rear hub, I bought this one because I didn't have enough threaded Stud bolt threads I used a special tool to replace the OEMBolt View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MAGNA 50, HONDA BENLY50CD50, HONDA BENLY50S, HONDA DAX, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CHALY 50, HONDA GORILLA, HONDA GORILLA, HONDA XR70R, HONDA XR50R (for competition), HONDA XR50R (for competition), HONDA XR50R (for competition), HONDA XR50R (for competition), HONDA XR50R (for competition), HONDA XR50R (for competition)
No problem
I don't know about the performance, but there are no problems with the accuracy of installation It was not
There was no rattling when I turned it by hand
View detail