Reviews
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY 70, HONDA DAX, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
What you need when you power up
Installed on MONKEY I was relieved to get Silver.
I was surprised to see Aluminum when I thought it was Steel.
Aluminum welds are rough but not performance related and the product is small and the price is satisfactory.
I don't want to add an Oil cooler or a kyatch tank if I can help it.
You may not like it when you power up, but you need it, and it's easy to install.
A little troublesome to install discreetly.
I like that Webig offers free shipping and careful packaging.
View detail
Fits: HONDA CUB90, Others , HONDA MONKEY, HONDA DAX, HONDA CHALY 50
As a good luck charm for Engine
MONKEY had to open Engine several times due to a combination of bad luck.
I have not had all of the cylinders and pistons reassembled in a long time, so I took this opportunity to replace them with OEM drain bolts.
Until now, I thought it was almost a matter of course that every time I changed the Oil, there would be a little or a lot of Gold powder mixed in, and I wasn't even sure if it was Aluminum or Iron.
However, the slightest thing could cause an unexpected trouble, so I installed it as a talisman for that purpose.
Material:There were aluminum and steel options, but we chose the stronger steel.
View detail
Fits: HONDA DAX, HONDA MAGNA50, HONDA Jazz, HONDA CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA MONKEY, HONDA GORILLA
It'll turn a certain way.
The high RPM shit clogging feeling is gone. It's pretty fun. Maybe it would be better if I changed the ignition timing.
The quality is not so good, there are some bumps in the Cam pile and I had to grind it with oil stone, and the noise is getting bigger.
View detail
Fits: HONDA DAX, HONDA MAGNA50, HONDA Jazz, HONDA CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA MONKEY, HONDA GORILLA
It is not bad
The top of Cam's mountain was angular, so I polished it with oil stone. The effect is that the carburetor with VM16 has fattened up the Torque above the mid speed range. It doesn't mean that I can climb up the hill with one step higher GEAR, but it's fun to do! View detail
That could be good.
I installed this on my GORILLA 88 6v car.
The engine is a 110cc vehicle after replacing the cranketc.
I used it for SHIFT UP 52mmCylinder.
It is a little thicker than KITACO and SHIFT UP, so I use SHIFT UP's aluminum cylinder gasket for Quantity.:I dealt with it by using 1pc. liquid Gasket because I want to reduce OIL leakage since it is Aluminum Gasket.
If you order a Gasket from another Manufacturer, the unused Gasket will be stored in the Quantity:This time, I can get only the Gasket which I want to use for around 500 yen, which is very helpful.
As for the feeling that I used it, the feeling of Minimoto until now seems to disappear, and it plays the role of the Gasket firmly, because I exchange Piston ring, Pin, and so on, I ran 400Km under 8000rpm for Ring break-in, and there was no Oil leak at all. I hope the durability at around 12000rpm by replacing these oil.
View detail
Fits: HONDA MONKEY BAJA, HONDA MONKEY, HONDA DAX, HONDA MONKEY, HONDA MONKEY RT, HONDA MONKEY R, HONDA GORILLA, HONDA GORILLA, HONDA XR50R (for competition), HONDA CRF50F
They didn't follow me easily
I used it to install the MAGNA50 Kick starter
for MONKEY's OEM Kick pedal is Straight Type in Frame It's going to interfere, and the SUPER CUBOEMKick pedal folds up and sticks out pretty well I didn't like it
There are some high quality products sold by KITACO and SPTakegawa Minimoto's Kick pedal is less than half price, so I'll just say that it's worth a try! I bought it at
The shape reminds me of the NS-1
As I recall, the spline diameter of the SUPER CUB series and NS-1 APE etc. is the same as the spline diameter of the Kickstarter It should be different, so I don't think it's just a Copy product
The texture is like a steel casting and has a massive weight
I think it's probably because the folding part is tough and the length to Pedal is long (In MONKEYOEM, only the pedal part is folded simply and the length is short (It's light.)
On the surface, I'm under the impression that it's just like this
It's like I just took a simple BALI after pulling it out of the casting and dipped it in Plating
Plating seems to be quite thick, perhaps considering its use as a Kick pedal
It's not pretty by any means, but considering the price, it's rather nice
So here's the problem
In my case, it did not fit easily
Perhaps the Plating I mentioned above is too thick
The cutting process of the Spline can be a bit tricky, and as it is, it doesn't fit in all the way to the end It was not
Thick plating after rough cutting results in loss of tolerance, or I think BALI had been fixed by Plating
By the way, the Kick starter shaft itself is new and other OEM Pedals can be installed So I'm sure there are no problems
As a result, I have to tap it in and out a bit with a plastic hammer and then use a thin Diamond BALI excised by file
I tapped it in and out again for a bit, and removed the BALI After repeating this process about five times, I was finally able to install it on Smooth
I don't mind, as I was able to install it in the end with no problems (more importantly, it's super cheap)
However, if you can't go through this kind of hassle, or if you can't process it, or if you have a very inexpensive party that's the same as a high-class party, then you'll be able to get it done If you are under the mistaken impression that you can use it as such, you should not buy it
View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA DAX
Cost performance is good!
Aluminum & Coating Bore, Big valve for a great price!
The combustion chamber shape seems to be good and it's hard to Knock and the top rotates fairly well
The problem is that there is no instruction manual..
Even if KITACO's tiger rolls are included in the package, the configuration is different to begin with, and I don't know what the maintenance standards are
View detail
It's tolerable..
Material : I made it solidly with Aluminum. At the time of installation, the included Gas ket was a little large-scale, so I was forcing it in, but when I tightened Screw it was possible to install without problems. View detail
Fits: HONDA BENLY50CD50, HONDA MONKEY, HONDA GORILLA, HONDA DAX, HONDA CHALY 50
It was surprising!
I bought it with price as cheap quality as it is
Even if it is said that domestic production quality is high as the completeness is high in any of the parts
It was making without doubt!
View detail
Fits: HONDA DAX, HONDA MAGNA50, HONDA Jazz, HONDA CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA MONKEY, HONDA GORILLA
From the previous Impression
It used to be Normal piston but it seems that Valve is hitting Piston with high revolution after entering KITACOHigh-compression.
It can be used only for Normal piston to the last.
View detail
Fits: HONDA DAX, HONDA MAGNA50, HONDA Jazz, HONDA CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA MONKEY, HONDA GORILLA
I think whether it is okay.
I also changed the carburetor together so I do not know if the difference is due to Cam, but it is quite powerful in the high speed range.
I ran with CUB 90 with a large site, but I can go along quite well.
If there is one bad thing, it is hard to do because there is no center protrusion on the OEM when you wear Camshaft Sprocket.
Well if I get used to it I will manage somehow.
Well after that what kind of durability runs a lot.
I have run for 5000 km since I replaced it at the moment, but I am fine without problems.
View detail
It was good to wear.
As a product, BALI had a bit, but it was lightly scarce, so there was not much.
I installed CUB 90 DX, CUB purchased this product as Carburetor gets in the way when trying to extract Blowby gas from Tappet cap.
I think that I do not know the effect unless it is rotated to high rotation, but those who want the last human growth are better Parts to wear.
View detail
Depending on Rear hub ...
I purchased it for attaching WideSpacer 7 mm to use APE with for MONKEY hub.
However, Pitch and Screw senior citizens were Large, but they were not nicknamed with their own hubs, or they could not be tightened until they stopped Spacer or Sprocket with few Screw cuts.
After all, stud bolt, hub fixed the Screw and put it on.
I am convinced that it was making good itself for things, but I think whether there is description in the explanatory note, the image, etc., such as dimensions.
View detail
Can you use Mr. 武?
It is purchase again. A similar thing comes out from Mr. ◯, but it was enough here. I think whether it is necessary if turning more than 10 thousand with the MONKEY system. I tried turning up to 13,000, but Oil's speech was mysteriously wonderful. It may be good in terms of location, although Engine Displacement Volume is obviously necessary. It is more SMART than taking it from the mouth, and it looks like CUB does not change. It's cheap and it's worth a try. This item is easy to install as Gasket is also attached. View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA GORILLA, HONDA CHALY 70, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY
With the intention of Dress-up
I installed it in solo of Honda.
SteamPuncture & Cafe racer like to aim and Custom.
Once Rose, paint Hose and Tank Body Copper Plating and install.
Because it was for MONKEY, I had a little ingenuity, but I could do Bracket kneading and attach it safely.
If you have a car with CUB system Engine, I think that it will manage any car type
By the way, I do not expect the performance effect.
As long as it is not Solidly's High tuned engine, it will not change so much that Fe Ring can be experienced by Crankcase internal pressure - - -
However, it seems that Custom feeling is very apparent and it is cheapest!
Those who are thinking about installing in terms of performance recommend a proper Mukawa product, etc. However, if it is important to look it is recommended.
View detail
1st part order wth "Minimoto" brand on my Minibike from Webike. it a high precesion aluminum clutch cover and awesome fit on my monkey Baja . Definitely looking for other product on this Brand .
1st part order wth "Minimoto" brand on my Minibike from Webike. it a high precesion aluminum clutch cover and awesome fit on my monkey Baja . Definitely looking for other product on this Brand . View detail
In a dirty engine I got it in color 〇
Because Clutch cover is dirty due to deterioration, OEM's "lid" I wanted to change the feeling and purchased it.
There was no problem with the installation, slightly attached Gasket was Large, it was possible to install it while it was overflowing. Since the finish of the center part was one and the polished pattern was conspicuous, I pasted Seal for Benz that was at hand. Overall there are many Blue Spec. Because it became, it was not bad as a fade color?
View detail
Fits: HONDA GORILLA, HONDA MONKEY
It attached to the old vehicle of 6V MONKEY. Since an Engine fitting volt was loosened by an old Chassis and distortion of attachment of an Engine although attachment was considered easily, although there was also unexpected work, such as removal of
It attached to the old vehicle of 6V MONKEY.
Since an Engine fitting volt was loosened by an old Chassis and distortion of attachment of an Engine although
attachment was considered easily, although there was also unexpected work, such as removal of a Rear-brake Switch etc., it was able to equip safely.
Since the step position fell for a while, the comment after
attachment are touch that a Position is easy, and the touch whose vibration decreased.
I think that it was good that the attachment distortion (there are no feelings of change by which special was corrected.) by the Chassis and an Engine has been corrected by this wearing this time [
].
View detail
It attached to the MONKEY. Although it was the easy structure by which the small magnet is embedded at the Bolt itself, when it was used for the Engine of a used Motorcycle, iron powder was attached with trace quantity. carry out expectation not muc
It attached to the MONKEY.
Although it was the easy structure by which the small magnet is embedded at the
Bolt itself, when it was used for the Engine of a used Motorcycle, iron powder was attached with trace quantity.
carry out expectation not much -- and I am glad to be effective in probably it being unexpected.
The
price also thinks that it is a cheap and handy Parts.
View detail