Reviews
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
There was a Gasoline leak.
Previously, I bought it from another company and it was leaking after about 5 years.
I have been driving MONKEY for about 13 years and this was the third time I had to replace it.
View detail
Fits: HONDA Shirley 50.
CHALY s Cook was broken.
CHALY I purchased this product because the Cook of Last time I had another CHALY I purchased this product in the first place and had no problems at all, so I purchased it again. View detail
In the Chinese VM Setting
[How is it used?
For some reason, Throw of Chinese VMcarburetor has this Type, so I used this one for setting.
Was the one you received as per Image?
The Sponge dividers were quite nice compared to the usual divider-only Packages.
It is good because Jet does not mess up inside.
Was the installation difficult?
Accuracy is adequate. There were no problems.
How was your experience with it?
Smallest SizeQuantity for SmallEngine Displacement Volume:I thought that with Set, I could Cover all of the Setting range.
It is said that OEMs are more accurate and better for jets, but if the mother company is a Chinese carburetor, I don't think it will be a problem.
[Was there anything that disappointed you?
None in particular
View detail
Perfectly designed
[How is it used?
Purchased for MONKEYZ50J.
I wanted to install a MikuniVM22carburetor, but it interfered with the Tank, so I bought an Intac Manifold Variable Attachment. I thought it would be a good idea to buy a Minimoto product for the time being.
Was the one you received as per Image?
I thought it was as shown in the Image and well made, so I thought it was worth the price. One thing I did not expect was that the variable attachments were thicker than I expected.
Was the installation difficult?
Installation is simple:simply mount it with the depressed side toward the front of the vehicle and fasten it with the included dish Screw.
However, the included countersunk screw was too long and could not be tightened, perhaps because it was a 4LMONKEY, so I bought a shorter countersunk screw separately and installed it.
How was your experience with it?
It has been working fine with no leaks.
The carburetor in question, however, I managed to install it.
However, the thickness of the variable attachment is quite thick, so I tried various angles, but it was too high and interfered with the tank, so I could only use it in a certain direction.
Even in that direction, there is some interference with the tank when the chalk is raised, probably due to the structure of the carburetor. At any rate, I am glad I bought this Attachment because without it, I would not have been able to install the carburetor.
[Included Parts:were they on?
Attachment that matches the inside diameter of the Gasket and intake manifold?
[Was there anything that disappointed you?
The thickness is still Neck. It is well made, but it would have been 5 stars if it were thinner.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
Fuel Cock M14
It is a product with good quality and texture information There is no difference in the feeling of use from the std products It's easy to install Cost performance and comparison with other products are cheaper than std products WeBike packaging is always great, arriving in a week for delivery and packaging Purchasing concerns, precautions, or advice The rubber packing may be damaged if tightened at too high torque. It should be tightened to meet specifications View detail
Used for PWK28.
Used for Chinese PWK.
It's a Jet, so there's nothing to write home about it, but it's cheap but made with precision.
I can use KEIHIN-compliant Jet for Chinese PWKs, which is very useful.
I think it is a necessity at the time of Setting.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund
Good cosmetics!
[How is it used?
We decided to purchase the carburetor to replace the carburetor along with the Bore up.
Was the one you received as per Image?
Quality was not bad and comparable to domestic carburetors.
Was the installation difficult?
Without a swivel Adapteretc., the large body will interfere with the Engine.
How was your experience with it?
It also runs in the Setting there.
Main should be around 100, and Throw may need to be raised a little from NORMAL 15.
It is definitely easier to Set up than TM24.
[Included Parts:were they on?
Nothing else in particular.
[Was there anything that disappointed you?
I was disappointed that the Jets were Minor and could not be diverted.
▼Recommendation is made because it is inexpensive and has a large diameter compared to PC20.
View detail
Fits: HONDA LITTLE CUB, HONDA GIORCUB, HONDA LITTLE CUB
Cospa is good
Used for LITTLE CUB.
Compared to before installation, there is a slight pulling feeling in 4th gear.
If not combined with other Parts, there is no extreme realization in the NORMAL state.
Installation is easy, but beginners should check from the CDI position.
Wiring is short? Perhaps because the wiring is short, there is a slight sense of forcing when installing.
The instruction manual is included for your peace of mind.
Satisfied with the cosmetics.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
tl50 isn't in the fit, but it's perfect!
I thought, "tl50 is not compatible, but it's a Honda, so if the screw diameter is right, it will fit! I half gambled and bought it!
The diameter of the Fuel Cock section of the tl50 is 14mm.
This is the same APE Tank I used to tinker with, so I knew it would probably get there!
If you measure the screw diameter with Caliper, I bet you can use it for the most part.
Motorcycles over 40 years old are amazing! The packing of the Fuel Cock is so chica like plastic and not even half of it is left!
Good thing Packing was planning to change everything.
I'm afraid of Gasoline leakage if I run like this.
It can't be!
Comparison with OEM
OEM is easy to understand because On, Off, and Reserve are written in letters.
I know this item, Off, because only one notation (circled) is different!
But On, is Reserve a pictorial notation? Pictographs?
I don't know what to look for in such a Д゚ Mark…
You have to remember intuitively where the cook twists!
The plastic tube like a filter is attached to the top of the Fuel Cock. However, when I installed it on my tl50, it would not fit in the tank with this Filter attached, so I had to pull the Filter out and leave the tube inside!
View detail
Looks like they're improving. (^^) Used for 4lInitial Model
I didn't like the Cook on the bottom out and ended up here.
First. RES-OFF-ON." is strange! I have heard that the display of "☆" is strange, but it seems to have been improved, and the one I purchased had the characters in the display. The image is also before the replacement.
I had no problem installing and using it. The switching operation is also well done, and I personally do not feel that it is cheap, etc.
Incidentally, I did a rose before installation, and the internal packing is also in line with the OEM, so I am not worried about the after installation.
I was curious.
There is a BALI at the Cock outlet and the inside diameter is narrow. The intake port at the time of ON is narrow and it seems to be hard for fuel to fall out. The mesh part of the Strainer is high, so fuel may remain.
Right. Well, as far as the others' are concerned, I guess there is no problem….
View detail
Fits: HONDA APE 100, HONDA APE 50
Processing Required
I've used it on two vehicles, XZ50-9 FI Vehicles and XZ100-8 Carburetor Vehicles.
Both car models required machining to cut this product.
in my case
FI Vehicles
Where it hits the PumpUnitMounting Bolt section on the Left Side.
Carburetor Vehicles
Where it hits the carburetor on the Right Side.
Where it hits Wiring at the bottom of the Left Side
Old Ryobi electric sandpaper was used.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY 70, HONDA DAX, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
What you need when you power up
Installed on MONKEY I was relieved to get Silver.
I was surprised to see Aluminum when I thought it was Steel.
Aluminum welds are rough but not performance related and the product is small and the price is satisfactory.
I don't want to add an Oil cooler or a kyatch tank if I can help it.
You may not like it when you power up, but you need it, and it's easy to install.
A little troublesome to install discreetly.
I like that Webig offers free shipping and careful packaging.
View detail
Quantity of Mikuni Maru Large:I was going to buy a Set and this is what I got.
Quantity of Mikuni Maru Large at POSH and other Manufacturers.:I think there was a Set, but before I knew it, there was only Minimoto, and while there are plenty of options for KEIHIN and other Jets, there are no less than Mikuni Maru Large.
By the way, for some reason, Mikuni Maru Large is just right for Dell'Orto's carburetor.
Jet will have a bigger hole due to wear and tear, so even if you don't change the number, let's replace it.
View detail
Fits: HONDA CUB90, Others , HONDA MONKEY, HONDA DAX, HONDA CHALY 50
As a good luck charm for Engine
MONKEY had to open Engine several times due to a combination of bad luck.
I have not had all of the cylinders and pistons reassembled in a long time, so I took this opportunity to replace them with OEM drain bolts.
Until now, I thought it was almost a matter of course that every time I changed the Oil, there would be a little or a lot of Gold powder mixed in, and I wasn't even sure if it was Aluminum or Iron.
However, the slightest thing could cause an unexpected trouble, so I installed it as a talisman for that purpose.
Material:There were aluminum and steel options, but we chose the stronger steel.
View detail
KEIHIN PC18/20 Pilot Jet 6-size Set
About quality and texture Quality, product finish, product composition, everything is good About the feeling of use I am setting the pc20 now. Because of the good configuration, more data can be found. Products to buy together pc20 Carburetor Difficulty of installation It's easy. We have to deal with the leaking gasoline Cost performance and comparison with other products Because it is made in Taiwan, I think the cost-effectiveness is excellent About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing I recommend you to buy it as a set It is cheaper It is made in Taiwan but the quality is really good, so the price is the best View detail
carburetor
I was very impressed with the Setting just by pimping it to the Bore up engine. View detail
APE 100
Choosing MINIMOTO Aluminum Buffing Finish Carburetor was a great choice and I recommend it because it is cheaper than NORMAL ITEM. -------------------------------------- Choosing the Minimoto Aluminum Buffing Finish Carburetor has a great choice and is cheaper than the Normal item. Powered by Google Translator View detail
KEIHIN PC20
I bought it while installing a friend APE100 DAYTONA KEIHIN PC20 ------------------------------------------------ I bought a friend APE100 Daytona Keihin PC20. I also purchased SP TAKEGAWA products, but this product is more adjustable, so it's easier to adjust. Powered by Google Translato View detail
MINIMOTO Oil cooler 3-stage Core
old car DAX." Used for
The 3-stage core was selected to make it more compact, and the cover was removed and installed. The nipple on the outlet was replaced with a banjo bolt to refresh the piping. The banjo bolt that comes with the unit is not strong enough, so be careful with the torque. I think the performance of this product is comparable to other expensive products, and it is a good and inexpensive product.
View detail
To APE with PD22 installed!
Used for Engine of APE100YOSHIMURA115carburetorPD22
Considering the sudden rain, I thought I'd stay dry.
If you're looking for a Filter with a 45 degree bend, this will work!
I used three Nitrile rubber O-rings of slightly larger inner diameter in the carburetor as spacers and Exactly
With this, I was able to install the Side coverSmall and the heat shield between the carburetor and the Filter to prevent rain!
View detail