Reviews
DAXAir cleaner
Good cosmetics,
Mounting Bracket Location OEM and
Spacers are not required because of the difference.
View detail
Fits: HONDA MONKEY, HONDA MONKEY
The direction of removal is ….
[How is it used?
SpiDer125 OEMCook is broken and is on Replace
Since it is not easy to find a cook for M12 female thread installation….
Was the one you received as per Image?
main idea
Was the installation difficult?
There is nothing difficult about it, but you need to be careful around fuel.
How was your experience with it?
Phi;8 is Overspecified for SpiDer125
[Included Parts:were they on?
Hose and Clip with I.D.Φ8, StrainerNet was included, which could not be installed as it is because the diameter of the end does not match!
[Was there anything that disappointed you?
The panelParts on the front of the Cook are not Screws but Rivet?
The SpiDerOEM is right, whereas the SpiDerOEM is left, so the Fuel Hose is a little more difficult to handle.
When the transparent hose is turned around at a steep angle, it breaks, so I use a hose with an inner diameter of Φ8 and an outer diameter of Φ8 with an inner diameter of Φ5.
View detail
ThrowSetting is difficult with 85cc.
I installed it for Replace because the overflow of the PB16carburetor in CUB90 was just not improving.
The pitch on the manifold side is the same and the carburetor will be attached as is, but the air cleaner side is 1.5mm shorter in diameter and the carburetor length is also shorter, so it is necessary to take some measures such as wrapping something around the carburetor.
Also, since the cook will be lost, it is necessary to add a 2-way cook with Reserve.
Since the Outer cable of the Accelerator Wire strongly interferes with the Main frame of the CUB, it is better to take some measures such as pivoting it slightly.
The thing itself is very good and accurately made.
The difficulty is that it is hard to set the SmallEngine Displacement Volume. 85cc CUB90 does not idol properly.
First of all, the notch at the bottom of the throttle valve is too large for the engine displacement volume, and the idle speed does not drop to about 2000 rpm. Setting does not come out this time.
It seems that the design of the Throw path itself does not match the Engine Displacement Volume, not because the bottom of the Valve has been cut off.
Idol is light on Brown, while 1/8th open is dark on Brown. This is a strange Setting, so it seems tough to replace the SJ that takes care of this whole range.
I have no choice but to give him the fuel mixture to match Idol, and it is like meditating on a thick 1/8 opening.
The 1/8 opening range used relatively frequently in city driving is thicker, so city driving fuel economy deteriorates slightly.
This is only when using 85cc, and once you get to 108cc, it becomes almost a non-issue.
The city driving fuel consumption is not too bad. This was confirmed by replacing the 85cc and 108cc Engines twice.
I think 125cc would be no problem at all.
From my research, it seems that it is not limited to Minimoto products, but PC20 itself is generally like that.
Therefore, we recommend using 108cc or more whenever possible.
Again, the product itself is good, no trouble after more than a year of heavy use.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Gasoline Hose
About quality and texture be well-organized Hose and clip About the feeling of use Takegawa High Flow Fuel Cock does not fit well with standard products, but the hose did not feel durable Products to buy together hose clip Difficulty of installation easy , simple Cost performance and comparison with other products It feels similar compared to other hoses. It's not much different, but it's cost-effective About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I tried to change the hose line because the oil tank was old and foreign substances came out, but the internal diameter of the SPTAKEGAWA High Flow Fuel Cock did not fit, so I will leave it as a spare and use it to replace the vaporizer hose View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
It takes much longer than the delivery time stated on the delivery method.
It was written that it would take 4-6 days to deliver the product at an expensive shipping cost.
It actually took 10 days to arrive.
Shipping takes the worst time.
However, although the product is for the Monkey 125, it fits the 2022 Super Cub 110 well. ------------------------------------------------------------ -------- It was written that it would take 4-6 days for the expensive shipping cost and shipping, but it took about 10 days to arrive.
Delivery takes the worst. Powered by Google Translator
View detail
Fits: HONDA SUPER CUB 90, HONDA Super Cub 100 (Thai Cub), HONDA Super Cub 70
subtle
I bought this for my SUPER CUB90.
I'm not complaining about the Jet, as it was explained to me that it has a different count.
The biggest problem was that the float valve was not the right shape.
In the end, the Float valve was purchased separately, so the Quantity of Packing only.:I should have bought a Set.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Plug cord long
Plug cord is too long compared with MONKEYOEM. Moreover, it is Type that cannot Cut. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund
It's Chinese, so it's probably like this.
It's cheap, but the processing is not good at all.
However, it is not so that the performance is not good, and I do not know well because it is after I fix it by myself, but I can use it normally.
You might be better off buying a cheaper Chinese product from Large Hand Mail Order Site.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It's okay
I installed it on the China Tank
The Screw is thicker than the OEM, so I chose this product
I was anxious to see if it would stick, but it did
I haven't used it yet, so I don't know if it's leaking or not
It's a relief that it's on
View detail
After the Spacer device!
Because I put a Spacer in the rear hub, I bought this one because I didn't have enough threaded Stud bolt threads I used a special tool to replace the OEMBolt View detail
Instead of an OEM Product!
I got the DAX from a friend of mine, and this is a big 88cc with a Bore up It was a cab air funnelSpec It was cool enough as it was... but I still like the OEM look decided to replace the carburetor with a PC20 and replace it with this air filter!
The airfuel itself is fine, as is the detail in other people's Impressions It's just fine! It's cheap! LOL!
Once you put it on, you don't have to worry about the details! expected to be
I thought it would be easy to put the Air Filter for DAX on the DAX! is PC20.... It wasn't so easy to get the carburetor side of PC20 size I added KITACO's Joint funnel to adjust the size of it and then I was able to get a better fit The Air FilterBody managed to install with a bracket
It came on like that, but it's pretty fluffy lol
But it looks like it, so let's call it good! Because it's cheap lol
The performance itself How is it? As far as the performance of the Filter is concerned? There are a lot of parts of it that are...cheap, lol
It needs some work to install, and I don't think it's number one in terms of performance, but It's okay.. It's okay! It's cheap!
I can't recommend it to complete beginners, but I'm sure you'll find a way to make it work If you like things to be attached, you should try it
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
A bit sorry
I had almost no complaints about the texture, and I thought it was excellent Cost performance Parts But as soon as I set it to Reserve, Gasoline came out of nowhere and I could smell it Is it called "China Quality"? View detail
It's cost effective compared to OEMs
The OEM product is too expensive to buy, so we can't afford this Universal Buy Product
The surface paint and details are crude, but it's cheap, so it makes sense
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
I'm fairly satisfied with that
I'm using KITACOPower Pack 50 on my 12BoltMONKEY, then I'm going to save weight I bought this part to do so, but I'm not sure how well it works
Parts accuracy was fine on the outside
I'm not sure if KITACO is the right choice for you if you have gold
View detail
Fits: HONDA MONKEY, HONDA MONKEY
Plastic filter doesn't work!
The diameter of the plastic filter is 8.6mm, but the diameter of our 4LMONKEY's Fuel The inner diameter of the Cook attachment part of the tank is 8.2mm, so it doesn't fit, but it's not an option Plastic filter was forced to be removed and installed...............................................unfortunately I recommend measuring the inner diameter of the CookScrew of the Fuel Tank before you buy it View detail
For mounting pc20
When I tried to attach pc 20 to MONKEY, I used it instead of Spacer because I hit Cylinder, so I used it instead of Spacer! I thought it was Screw of Plus but it was Screw of a hexagon hole! Personally I hate Screw of Plus So it was nice to be here. View detail
[a Webike Monitor] -- liking to carry out the Oil cooler under Wright -- purchase -- in my case, if it was processed since it was an external Stainless, but it is a direction of the (past [ a before ] -- low -- since it elapsed and came
[a Webike Monitor] -- liking to carry out the
Oil cooler under Wright -- purchase
-- in my case,
if it was processed since it was an external Stainless, but it is a direction of the
(past [ a before ] -- low -- since it elapsed and came out and carried out) Normal fork -- a STAINLESS STEEL --
-- since it is beautiful and strong, I think whether it is good
View detail
Although the thing of other Manufacturers has not been used, structure is not bad and it has also gathered iron powder. It was shopping cheap as a spell.
Although the thing of other Manufacturers has not been used, structure is not bad and it has also gathered iron powder.
It was shopping cheap as a
spell.
View detail
It is common. if it attaches to the place shifted one from the transverse plane, a gasket will not hit -- w -- common except it
It is common.
if it attaches to the place shifted one from the transverse plane, a gasket will not hit -- w -- common except it
View detail