Reviews
Fits: HONDA GORILLA, HONDA MONKEY
Since vibration is amazing, it is attached to GORILLA 6v
Since the vibration is amazing, I installed it in GORILLA 6v.
Before and after installation
Vibration is suppressed enough to understand no matter who rides.
Bolt on the Frame side was provisionally assembled after opening the box after the item came, but the Engine side is short on Bolt with Bolt and not attached at OEM
Go to the home center
Stainless Steelm 8 hexagon Bolt 30 mm 4 pieces
Spring washer Quantity for Stainless Steelm 8 : 1 Set of 4pcs.
Washer Quantity for Stainless Steelm 8 : 1 Set of 4pcs.
I was planning to buy it, but I got a little longer between footpeg and reinforced Plate.
In the case of Normal step, since it falls downward only by the thickness of the reinforced plate, it hits Brake pedal, so when installing
I think that 25 mm is exactly good with Stainless Steelm 8.
The point to be noted when installing, it is easier to align the Bolt position if you loosen the Bolt 2 locations fixed to the Engine.
As I am Drum brake, I finally adjusted Drum brake and brake switch after finishing tightening.
If you do not adjust the brake switch, the brake pedal is hit by the OEM footpeg so the brake light will remain lit.
The price may be a bit high, but the difference is clearly understood by not having it.
View detail
It's tolerable..
Material : I made it solidly with Aluminum. At the time of installation, the included Gas ket was a little large-scale, so I was forcing it in, but when I tightened Screw it was possible to install without problems. View detail
Fits: HONDA BENLY50CD50, HONDA MONKEY, HONDA GORILLA, HONDA DAX, HONDA CHALY 50
It was surprising!
I bought it with price as cheap quality as it is
Even if it is said that domestic production quality is high as the completeness is high in any of the parts
It was making without doubt!
View detail
Fits: HONDA DAX, HONDA MAGNA50, HONDA Jazz, HONDA CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA MONKEY, HONDA GORILLA
From the previous Impression
It used to be Normal piston but it seems that Valve is hitting Piston with high revolution after entering KITACOHigh-compression.
It can be used only for Normal piston to the last.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Battle at the price
It seems that the same thing is sold recently by other companies, but since I have not seen the actual thing, there is no way to answer, but I think that this item is a good product.
Last time I attached it to the 6 V car of GORILLA 10 cc, it was fitted to the 12 V car of MONKEYDOHC this time because the fitting feeling and the performance was also good.If the Rear Sets are not attached then the Side Stand length will not match and so Side StandCut or exchange Otherwise Motorcycle will be in an upright posture so be careful.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
It is good for price
Although it is written as "Pon", it interferes unless Shaft of Oil pump is thinned. It became 110cc with the 88cc Cylinder, but it is terrible Torque, Power. It was my first time to decompose the waist but I think that anyone can do it with Gasket and a tool. View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
A different item arrived
This item was with Fuel Cock M 14 of MONKEY but things of M12 reached and could not be used
The bag containing the product was broken and it was not returned
There seems to be a problem such as other products also containing different products with respect to the middle goods
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Personally it is the best
It was installed in 6 VGORILLA, but there was no installation explanation but it was possible to install immediately.The making is very beautiful, there was BALI but it became beautiful with Sassa with paper file.B / Since it is attaching S, there was no difficulty of Brake relationship like other users, so the position of footpeg has not changed so Side Stand is a little standing, GORILLA has two points on Engine, For the time being, I got a three point stop, so I'm more comfortable.The price is reasonable, there is no hindrance to the engine oil exchanges in daily maintenance, the engine looks like it is under the engine, so there is no superiority feeling to say that so much remodeled , The feeling of running decreased Engine Noise to 60 Km (Although I gave Speed ??a bit more) When I was Frame 50cc though the Engine Displacement Volume was more than doubled by Honda's Motorcycle, I was scared mentally spiritually because I was scared of Bolt's tightening Torque I think that it is a good product if it is assembled. View detail
MINIMOTO 12V MONKEY Oil Cooler
The item that you will actually receive is similar to the one shown on BT, except that it has been professionally modify and cutout to fit the 72cc engine. This modification does not effect its overall looks or performance, the cooler does drop the oil temperature by at least 10 degree, which might not sound like a lot, but every degree helps to keep your bike cooler. The cooler was shipped and received quickly without any issues. I highly recommend this product and seller. View detail
Fits: HONDA DAX, HONDA MAGNA50, HONDA Jazz, HONDA CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA MONKEY, HONDA GORILLA
I think whether it is okay.
I also changed the carburetor together so I do not know if the difference is due to Cam, but it is quite powerful in the high speed range.
I ran with CUB 90 with a large site, but I can go along quite well.
If there is one bad thing, it is hard to do because there is no center protrusion on the OEM when you wear Camshaft Sprocket.
Well if I get used to it I will manage somehow.
Well after that what kind of durability runs a lot.
I have run for 5000 km since I replaced it at the moment, but I am fine without problems.
View detail
It was good to wear.
As a product, BALI had a bit, but it was lightly scarce, so there was not much.
I installed CUB 90 DX, CUB purchased this product as Carburetor gets in the way when trying to extract Blowby gas from Tappet cap.
I think that I do not know the effect unless it is rotated to high rotation, but those who want the last human growth are better Parts to wear.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Fairly
Purchase for review of CB125T electrical system. I bought two because it is two-cylinder. It was possible to install without trouble and Length. After that I ran about 5000 km without a problem. I think that it is good to worry about spark leak because it is integrated with Plug cap, but there was no real difference. Red color may be one point, but it is easy to get dirty. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MAGNA 50, HONDA BENLY50CD50, HONDA BENLY50S, HONDA DAX, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CHALY 50, HONDA GORILLA, HONDA GORILLA, HONDA XR70R, HONDA XR50R (for competition), HONDA XR50R (for competition), HONDA XR50R (for competition), HONDA XR50R (for competition), HONDA XR50R (for competition), HONDA XR50R (for competition)
I feel I'm getting better
I am doing 75 cc & & High Camshaft, but I want to get on forever so I need Pump ability to survive Engine !!
Until now "I have been trying hard forcibly" Like the engine sound it turned into a sound that has plenty of room.
For example, it seems like a stable bass sound reminiscent of 125 cc Scooter OEM sound.
Orifice is not expanding Large. There are various theories but this will go on.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
Help when in trouble Items
I installed YOSHIMURAYD 28 on 12 VGORILLA, but Normal cook (Bottom draw) At the fuel Tube location is bad, the attached Tube is bent, causing trouble in fuel supply.
By changing to a side-by-side Cook, it was possible to handle Tube without Stress.
Although there are individual differences, there was no thing that the fuel supply could not catch up even if it rotated more than 12000 at 110 Engines.
I think this quality is good shopping at this price.
View detail
I broke when I ran about 3 km.
Wheel Purchased with the exchange.
I tried running about 3 km on test and tried running from the signal wait, I heard an abnormal noise and broke three pieces.
It's a fucking quality.
View detail
Installation Now in use.
Although it is in use right now after installation it is inconvenient etc. etc. There is none. It was also easy to install and could be installed immediately.
I would like to purchase again.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
There is something different ...
This time I ordered a product with Screw diameter M 14 and Label also so, but when I opened it, Bolt 's body attached side of Screw was M12 ... I want you to keep the product management solid View detail
After installation, it is about 100 km running ...
Installed in Yamaha XG 250 TRICKER 04. Normal cab is too heavy Setting is difficult to set out I get sick at the altitude but it gets worse so I troubled and decided to wear it
First of all it's almost like pounding. Since the diameter of the intake manifold is slightly small, it will be stuck to it unless you attach it as thick as it will be thick but secondary intake will take place from the clearance. I am a bicycle Rim Band (Paste Type) I rolled around three laps and gave it. It was perfect. Air cleaner side will be attached without problems if you tighten it tightly.
Since Accelerator Wire will be reduced by one, exchange. We will use the price but use Bent High Throttle Kit from TAKEGAWA. This Wire, the attached cable length is only 680. If you do your best at Gili, I will reach you, but I will cut Handlebar. Here is another option to buy Cable 880, sold separately. (This already exceeds the price of carburetorSingle Body)
Tank installation is a carburetor's Top wire and bottom of the tank come into contact and it looks like a bad feeling that makes it look very different. I tried at this point, but I did not interfere with Wire in particular.
Who cares? (Including me) If you install the Bent Top Cap made by TAKEGAWA again, it will be Refreshing. Kitchen gets bent to 90-degrees. Instead it is amazing price
Setting is POSH Faith : 700030Pilot Jet Set for KEIHIN PE28 / PWK 28 Carburetor 35 #
Main jet, but POSH Faith : 700002Main Jet Set for KEIHIN PE24 / 28 / PWK28 / FCR Carburetor Body Carburetor ← This is not attached. Float will not close unless you use a thin type Slotted screwdriver to remove it. I caught on Copy's Logic. I think that I entered 125 # with certainty.
Clip is in a state of wait by stepping down one step.
Smooth has been decided surprisingly from the bottom to the top on running on public roads. Normal cab 70 to 80 visits Torque fully Smooth without bumps.
After that it is how far we can use with forest road AttackTouring. I would like to match with a low speed TRIAL ride instead of Speed ??emphasis. Tight Hill climb also listened quite nicely. The Axel reaction was also agile and the rock and log crossing became considerably easier.
I think that Axel from the 2nd speed low speed is a little dark, so I think I should return the Clip to the middle.
Where will you have more at this price!
View detail
Depending on Rear hub ...
I purchased it for attaching WideSpacer 7 mm to use APE with for MONKEY hub.
However, Pitch and Screw senior citizens were Large, but they were not nicknamed with their own hubs, or they could not be tightened until they stopped Spacer or Sprocket with few Screw cuts.
After all, stud bolt, hub fixed the Screw and put it on.
I am convinced that it was making good itself for things, but I think whether there is description in the explanatory note, the image, etc., such as dimensions.
View detail
Strong operation feeling
I bought it because it was necessary to adjust the Pilot screw when exchanging to the Exhaust System of the Full Exhaust System, but I do not have any special after-fire so far, so I have not used it yet, but the quality itself is a solid feeling is. View detail