Reviews
MINIMOTO Regulator from 6V MONKEY Silicon Rectifier
I installed it on my 6V GORILLA, I bought it to customize it with 6V, the voltage is very stable and the battery life is longer. I will continue to ride on the Large Cutter while maintaining it. It has been my partner for more than 40 years. View detail
MINIMOTO6VMONKEY Silicon Rectifier Fire to Regulator
I have two 6V GORILLAs, so I installed the first one and the voltage became very stable and the battery life improved dramatically, so I installed the second one as well. I did not want to change to 12V, so I bought it to keep driving with 6V. View detail
Battery depletion and bulb breakage countermeasures!
I have the impression that the 6vEngine runs out of battery fluid quickly and is prone to bulb failure…
I was looking on the Net and found out that the voltage is regulated by Lectifire and Battery?
And my own tl50 that I got used had dried up Battery fluid!
This is why I decided to buy it to make it Regulator like a modern Motorcycle.
For MONKEY parts, but there are only 4 Wiring, and even if the shape of the Connector is different, it is only necessary to modify the Wiring, so I guess the threshold is low in this area (laugh).
tl50OEM Lectifirer is vertical and horizontalQuantity:2 pcs of Connectors could be popped in.
View detail
Minimoto6V Regulator
It is easy to install. Now I don't have to change batteries so often. View detail
Initial 4LMONKEY, Regulatorized
I put a ST50 Engine on my Initial Model4LMONKEY and it was generating too much power and when I increased the RPM, the light bulb would go out. 。 I know I am biased, but I was worried about the quality of Minimoto because there are no good images of Minimoto, but when I installed it, I was very satisfied with the quality of the regulator.
The installation is not that difficult, but since I don't trust CrabClip, I cut the wiring on the 6V MONKEY/GORILLA Main Harness side of the Coupler and add an additional wiring to it, then use the Bullet Type Terminal to force the connection. Then, the waterproof cover is attached and the waterproof cover is removed. Then, the waterproof cover is too tight, so I used Nylon Tape to cover the wiring. It requires a little ingenuity, but I think it is safer this way.
View detail
The poor electrical components of the 6VCUB will be slightly better.
When the battery gets weak, the headlight and tail lamp, which are directly connected to the generator When the battery is weakened, the headlight and tail lamp, which are directly connected to the generator, get a large voltage and run out of bulbs.
When I put this product in the wiring, it seems to prevent the voltage from flowing beyond a certain level, and the Valve is no longer out of bulbs because the voltage does not flow beyond its rating.
View detail
A little bit cheaper would be great!
I installed it on MOTOCOMPO
Wiring was adjusted by cutting and pasting because it was long
I don't agree with taking a simple Tap connection from the generator, but anyone can install it Quantity:Set
View detail
For MONKEY - -
I used it for SEA BASS VANVAN RV 50.
Battery replySpec. Mounting with Condenser for
Stably LightBlinkerTailetc. You can now use it.
It can be used with confidence without breakdown.
Cheap buying - - - It is a product that you can use with confidence so as not to become
Needless to say, processing etc.. I need some knowledge.
View detail
For cars with chassis number 1600000 or earlier.
For old MONKEY, I use Silicon Rectifier Fire. This is only to convert the generated alternating current to direct current electricity, there is no function to suppress the voltage like the Regulator. Always Battery is overcharged.
In my case Battery died about 1000 kilometers.
Black rectangular box of photo is Silicon Rectifier Fire. Cage Lame It is the Large crime of Le. This is fixed under Seat MONKEY is cautionful!
Please turn on Regulator. The life span of Battery grows far enough.
How to install is written in the attached Instruction Manual, but I explain briefly here.
1. Remove Seat and Left Side Cover.
2. Remove the Rectifier under Seat and connect the Connector of the purchased product.
3. Product's Yellow color Wiring and Generator cover (Gold genus Case above Change Pedal) Connect the Yellow color Wiring in the plural Wiring out of it with the attached electric tap.
4. Body ground the product's Black Wiring.
5. Set Regulator in appropriate place. I fixed it under Seat.
6. Add Seat and Side cover.
This is the installation procedure.
Although it is a commodity that you can not handle yourself, I think that it is better to buy this price than to make it yourself.
With this, the worry of the bulb is lost.
View detail