Reviews
MINIMOTO 6V MONKEY6V MONKEY/GORILLA Main Harness
I purchased the 6V MONKEY/GORILLA Main Harness for MONKEY/GORILLA last time and this time I purchased this one because it comes with Silicon Rectifier Fire and the price is reasonable. I purchased this product because I can do the wiring without any problem. 6V OEM product is discontinued, so I am very thankful for this product. View detail
Fits: HONDA MONKEY
3-pole coupler connector
Quality and texture information is no different from the std product It is compatible with Honda Std products for its usability You should have a wire stripper to buy together It's easy to install Buy based on cost performance and comparative brand preference with other products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice on purchase If you connect the cable incorrectly, it is difficult to reunite There should be no failure from the beginning View detail
Power Supply Branch
I wanted a 110 2-pole terminal for charging and connection.:I wondered if it was a good idea since it is a Set, but substitutions with other inexpensive items would have sufficed. View detail
Terminals Waterproof and for insulation
Used for the crimping part of the Brake terminal.
Mainly for waterproofing purposes. To be honest, I thought two Shrinks would be enough, but I was attracted to the fact that there are various types of Covers and that they come with a Case. I will keep it for a while because I can use it in case of emergency.
View detail
The "Kill" is required.
If you use it in Minimoto's Kit, it's not a problem, but …
Wiring modification is required when using OEMParts or outside the company.
There is no Wiring diagram and even if you see it, the colors are different, so you need to have some understanding to Large strange.
View detail
I wonder if it could be a little cheaper, I'm looking for 8cm re-release.
Used for Clutch Cable of THRUXTON900
A little short. Is the 8cm one discontinued?
I cut and add the for Motorcycle's and use them.
It's expensive, isn't it? How about half price?
View detail
Useful to have
[How is it used?
I have been using Bullet Terminal for all of my Harness tweaking. Sometimes, when I have the motivation, I use AutoBacks and Color:I used to go to YellowHat to buy Coupler sets made by Emon, but it was a hassle to go buy them & expensive to buy them one by one.
Was the one you received as per Image?
It is just like the Image. Or rather, the quality is better than I expected.
Was the installation difficult?
Just turn the Wiring with Electric Works Pliers, Crimp and plug it into the Coupler.
It is useful to have a tool like this (https://www.webike.net/sd/2084789/) in case you plug it in by mistake. If you can pull it out cleanly, you can reinsert it.
How was your experience with it?
I no longer have to go out and buy every single thing, and I can put Wiring together neatly.
The fact that it comes in its own container is also a plus, as it saves me the trouble of going to the 100-yen store to buy Case.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
You can find other couplers from MINIMOTO (https://www.webike.net/tab/parts/bm/1409/br/1384/?q=%22%22&scls=2).
View detail
Universal Bellows Boots for Cable added to Clutch Cable
The NC750X has many areas of reduction in cost.
The clutch wire cable (let's make it hydraulic!) Dust Boots are also not included.
Both the Lever and Mission sides are bare.
The Lever side is made from Offfor Vehicle's Boots, but the Mission side is made from Bellows.
I found just the right one at Universal Product.
Minimoto's UniversalBoots with a total length of 50mm and a hole diameter of 3mm on the thin side (Wire side) and 6mm on the thick side (CableScrew part).
It was Exactly. I plugged it in while spreading it out without any processing.
This will protect you from rain, dust, etc. You can use it with peace of mind. I recommend it.
View detail
To install the MechanicalSwitch
I used it to convert the Zr-7S to Rear Sets.
I had been wondering what to do with the OEM parts for the Rear Sets, but there was no mount for the brake switch.
I considered getting a Hydraulic Switch, but I was hesitant because they are known for their high failure rate.
Thanks to this product, I was able to install the NORMAL Mechanical Type Brake Switch.
It is for MONKEY, but you can buy it for less than 1,000 yen, so you can use it for other than MONKEY.
By the way, I found out later that Kawasaki's ZrX1100 also seems to have these parts separately.
Maybe I should have done that since it's a Kawasaki?
I'll try to find the OEM Product number next time lol.
View detail
Ignition lock for Super Cab
I bought this ignition lock instead of the old one. the old one sometimes lost contact when driving over irregularities, which led to the fact that the turn signals and the display were turned off. The lock itself fit very well and the workmanship is very good, but the wiring needed to be redone as I have an electric starter. Therefore, the pins themselves had to be redone.
I recommend taking it if you have a problem or you have lost your keys. An inexpensive way to solve these problems.
-------------------------------------------------- -------- I bought this ignition castle in return old, because The old one sometimes moved contact when driving at irregularities, which led to the turning and display turned off. The castle itself approached very well and the quality of execution is very good, but the wiring needed to remake, because I have an electric starter. Therefore, the Pins themselves needed to remake.
I recommend to take if you have a problem or you lost the keys. Inexpensive way to solve these problems.
View detail
Fits: HONDA MONKEY
Used for MONKEY.
I used it for the Connector of the Tail part of MONKEY.
When you don't want to cut the Harness, you can use a thin slotted screwdriver etc. to hold the nail and remove and replace the Plain Type Terminal.
View detail
Fits: HONDA MONKEY
For use with the 6V MONKEY/GORILLA Main Harness for Replace.
I bought it in order to divert 6V MONKEY/GORILLA Main Harness (for 6V early stage) for Replace made by the company to my car (6V late stage:car with Regulator). In order to use their 6V MONKEY/GORILLA Main Harness, you need 4-pole coupler to connect Harness side 4-pole coupler to Battery separately. However, the Coupler on 6V MONKEY/GORILLA Main Harness side is 110 type 4-polewith Lock, so you can use 110 type 4-polewith Lock Coupler instead of this Coupler. View detail
Fits: HONDA MONKEY
Refreshed
The home-made Indicator Lamp was wiring with Bullet Terminal But when removing and removing the meter surround when you lose it, it is troublesome and Wiring is It's a mess, so I introduced it when I was organizing Wiring around Front Thanks to your help, it was Refreshing View detail
Fits: HONDA MONKEY
Wiring is neatly organized
I bought it to install the ICBlinker relay in Couplet-on
Home centeretc. doesn't carry it, so look around for motorcycle supply stores It's also a lot of work for me
For installation, if you can crimp the Bullet Type Terminal, it's easy I think you can
However, if you plug in the wrong coupler, it's Large strange to remove it, so you have to line up the other side well It's important to check
My hope is that the Coupler color would be available in Black
View detail
Main Key Cylinder for Super Cub
Hello Webike! I bought this ignition switch to replace the old original ignition switch. The old ignition switch had poor electrical connections and I decided to replace it. The workmanship is good, the lock fits perfectly in the original place. The electrical connector matches the original wiring. This ignition switch will not fit Honda Super Cub fi with injection engine! Thank you Webike for fast delivery and quality product! Hi Webike! I bought this ignition switch in exchange for the old original ignition switch. The old ignition switch had poor electrical contact and I decided to replace it. Workmanship is good, the castle perfectly fell into place of the original. The electrical connector went to the original wiring. This ignition switch is not suitable for Honda Super Cub fi with an injection engine! Thank you Webike for the fast delivery and quality product! translated by Google Translator View detail
Fits: HONDA MONKEY
It's not easy to sell
I used it to replace the Blinker relay with an ICRelay
I didn't want to do anything to the vehicle body Harness, so I asked ICRelay's Wiring for this I put the product on and made it Couplet-on
The 2-pole and 4-pole ones are readily available at home centers and supply stores, but This shape of coupler was helpful because there are not many places that sell this shape of coupler
View detail
Quantity : Purchase Set items
To finesse Wiring, 0. Since it is common to use Size less than 3sq, Shrinkable Tube also wanted Small Size. I thought about buying only 2 mm Tube, but since it is imprecisely Quantity with abundant Size with Case : I bought a set item
Performance is the same as other Tube. , The shrinkage factor is about 50%. It was easy to use because it was short cut shortly from the beginning
Shrinkable Tube is a necessity if you finger Wiring, Quantity with abundant Size : It is convenient because you will not buy it after you purchase a set item
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Things are not bad
The explanation was difficult for me to understand, but it was Harness for Chinese Engine made by Minimoto. Since it was used for MONKEYOEMEngine, it was only for me to use Wiring's parts removal and electrical system. Wiring diagram is also confusing compared to Posh. View detail
Used for Mini bike race
Kill switch and other switches are together and can be used for various things.
It works in conjunction with Stopwatch, and it is used for Speed ??Limiter.
These parts are useful for Case where there is no place to attach various switches around Handlebar.
View detail
It was Impre street
I was also in Imprint, but I was lost as to whether to abandon the installation before installing it.
If you tighten it, it will be pushed by the looseness prevention Plate and the StartSwitch will remain pressed.
Since Wiring was necessary, we saw that the switch does not come back when we look at the installed state before installation, so I abandoned the installation.
I tried removing the Switch and processing it, but I could not do anything because the Switch did not come off.
Since the Wiring diagram is not included, I gave up because the Wiring connection was also uneasy.
This product was easy-going - - -
View detail