Reviews
GORILLA2V Change
Purchased 6VGORILLA for 12V changeover.
It was easier to do than collecting in Rose.
View detail
Fits: HONDA CUB PRESS , HONDA DREAM50, HONDA MONKEY, HONDA NS50F, HONDA APE50, HONDA CUB LITTLE CUB , HONDA GYRO UP, HONDA GYRO X, HONDA MAGNA50, HONDA APE100, HONDA CHALY, HONDA GORILLA
Super White
About quality and texture The quality of Minimoto is really good About the feeling of use I feel really good because the color got brighter Products to buy together If necessary, a relay to match the voltage is required Difficulty of installation It's very easy Cost performance and comparison with other products The product is very good for the price About shipping and packaging The packaging is always meticulous The delivery took four days Any concerns, cautions, or advice when purchasing If you're not going to install LED, I'd like to recommend this product View detail
Z50A MONKEY to!
I removed the Lens when replacing the bulb and it was the same as the OEM, screwed in and easy to remove. The product itself is also beautiful.
Just! The crimp on the terminal was weak and it came off immediately. There may be individual differences, but it would be better to check when installing.
View detail
Better than OEM
The contact with Valve melted, I replaced it with an OEM product, but when I forgot, the contact melted again It melted, so I replaced it with this one This one has + and - contacts independently pressed by Spring (OEM has one The plate has contacts on top of the plate and the entire plate is pressed down by spring It feels like a secure contact with the Valve contacts View detail
Fits: HONDA MONKEY
It may be bright with LED
I like the lighting method that the sharpness worked because it is LED.
I installed it in Carrier of GCraft, but other OEM Bracket and Boltetc. Is required.
There are various Short tail kit etc outside the company, but maybe OEM Bracket is necessary regardless of which one you use.
It will be close to 3000 yen by itself.
I think that it would be good if you let it out outside the company.
I made it by bending Aluminum sheet or drilling holes.
Number The mounting part is Plastic. If you tighten without using Large Washer, it will be dented.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
6v ball stock is low!
I purchased it since it is installed in the 88 year GORILLA. Parts store Mr. Motorcycle When going to shop to buy it, stock is out of stock so it is in the Parts box as Stock. Because I do not use it immediately, it is saved for a little Shock because it is in Case. View detail
Fits: HONDA MONKEY
Mandatory Items for LEDization!
I used SOLO's Blinker as an LED.
Honda type Blinker is Indicator 3. 4 w is bad, so this time we will remove Lamp and deal with it.
If I can afford it I will put it in Diode and I will try to revive the Indicator.
I do not understand the durability, but I wonder if you care about this price.
View detail
Fits: HONDA CUB PRESS , HONDA DREAM50, HONDA MONKEY, HONDA NS50F, HONDA APE50, HONDA CUB LITTLE CUB , HONDA GYRO UP, HONDA GYRO X, HONDA MAGNA50, HONDA APE100, HONDA CHALY, HONDA GORILLA
I think that it became bright about 1.2 times when saying from the Valve of the NORMAL. When saying since an authentic positive one was too dark and, the uneasiness of the run of night became small.
I think that it became bright about 1.2 times when saying from the Valve of the NORMAL. When saying since an authentic positive one was too dark and, the uneasiness of the run of night became small. View detail
Fits: HONDA MONKEY
The Blinker was changed into LED, and although it was considered only as the LED ball, since the Tail was not so bright, it was changed into this. Although brightness is enough, it compares pure and a crevice is made a little. Well, it is seldom worriso
The Blinker was changed into LED, and although it was considered only as the LED ball, since the Tail was not so bright, it was changed into this. Although brightness is enough, it compares pure and a crevice is made a little. Well, it is seldom worrisome. View detail
Fits: HONDA CUB PRESS , HONDA DREAM50, HONDA MONKEY, HONDA NS50F, HONDA APE50, HONDA CUB LITTLE CUB , HONDA GYRO UP, HONDA GYRO X, HONDA MAGNA50, HONDA APE100, HONDA CHALY, HONDA GORILLA
Although attached to the BIRDIE90, do you think that it is very good by the touch which became a Fashion from the Business motorcycle just for a moment?
Although attached to the BIRDIE90, do you think that it is very good by the touch which became a Fashion from the Business motorcycle just for a moment? View detail
[Webike Monitor] Simultaneous purchase with 12V-ized Kit of the and purchase motive company. Since it was purchase with a single article, and a price practically equal. It - Attaches and, in the case of CT110, completes altoge
[Webike Monitor] Simultaneous purchase with 12V-ized Kit of the
and purchase motive
company.
Since it was purchase with a single article, and a price practically equal.
It - Attaches and, in the case of
CT110, completes altogether by one Plus driver.
(with marketability and no relation)
and in play
Since it is a fundamental electric lamp Set which is not a High Wattage in particular, either, brightness is it.
However, it is markedly brighter than the standard equipment electric lamp of 6V, and a Blinker could come to be seen daytime also.
and general comment
Considering a price, as temporary exchange, it is the passing mark enough.
View detail
Fits: HONDA CUB 93- C50-040001- *Except for Custom, HONDA CUB90, HONDA LITTLE CUB C50-4500001-, HONDA CUB70 , HONDA LITTLE CUB AA01-3000001-
Since it was a cheap Headlight, it had seldom expected, but since atmosphere was changed simply and conveniently, it was good. However, although the Base of a Shade is on the Lens outside, there is the crevice here. Since dust was likely to enter f
Since it was a cheap Headlight, it had seldom expected, but since atmosphere was changed simply and conveniently, it was good.
However, although the Base of a Shade is on the Lens outside, there is the crevice here.
Since dust was likely to enter from this crevice and the reflection factor of the Reflector was likely to be dropped when long time use was carried out, the Hot bond closed.
View detail
It was used for the Restore of 4L MONKEY. It was finished in good touch.
It was used for the Restore of 4L MONKEY.
It was finished in good touch.
View detail
This taillight and bracket was overall nice for the price. The quality of the chrome was not that great on the bracket itself. There was some type of residue left from the chroming process, but most of it came off with some elbow grease and metal polish.
This taillight and bracket was overall nice for the price. The quality of the chrome was not that great on the bracket itself. There was some type of residue left from the chroming process, but most of it came off with some elbow grease and metal polish. Take into account the price, you will be pleased with it just as I am. The tail light has 3 wires so it worked perfectly with my Lifan clone. The colors were even the same as my harness. Thank you WeBike! View detail