Reviews
The "Kill" is required.
If you use it in Minimoto's Kit, it's not a problem, but …
Wiring modification is required when using OEMParts or outside the company.
There is no Wiring diagram and even if you see it, the colors are different, so you need to have some understanding to Large strange.
View detail
It didn't work
It is the one that pulled out a thick aluminum plate, and uses the AquaPRO? of DAYTONA I bought it for the sake of it, but I ended up not using it because I had a surprisingly difficult time finding a place to install it
It's not that the performance of the product is bad, but it's a little bit large, and the angle of the foot is delicate You should think carefully before buying because of
If you have a Skill or tool that can cut out a steel plate, you may want to make your own
View detail
Too bad quality
4Quantity:I bought a Blinker from Set, and one of them has a 3cm long Lens Crack was found As soon as I found it, I applied for a replacement request Then, they responded quickly, and 3 days later, I received a package of 2 replacement lenses The Manufacturer sent it to me However, both of those pieces had Crack again It's not visible when you install it, but after installation, it cracks again due to the vibration of driving, etc I think there is a fear There are other Lens, but Small Sana Lack, Small Scratches, and in the manufacturing process I didn't even take the BALI that comes out Certainly not at a high price either "Cheap or not Then I don't think it's good enough Do you ship with a quality check? It's so bad I want to say it I will never buy anything from Minimoto again, except for the Lens, which is beautiful View detail
I can not recommend it except for those who can process it.
Socket's nail is broken and light does not light up Purchase.
The shape is almost the same as OEM
When the thickness of the electrode plate is 0. Thickness : 1 mm, because the gap between the electrode plate and the electrode plate is wide, it can not be attached as it is.
Also, like the OEM, there is no play in the hole at the base of the electrode plate, so it is not possible to move the electrode plate.
I diverted the old Parts and expanded the hole to make play, but it is easier to buy the OEM because it is troublesome.
View detail
Chinese made not good
Because I do not want to cut Harness of car Both Sides for LED installation, I bought it for processing but on the car of Both Sides's Connector
Terminal position is Gap and can not be inserted. Plating of terminals is also bad compared to OEM.
Give it up and buy an OEM.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Things are not bad
The explanation was difficult for me to understand, but it was Harness for Chinese Engine made by Minimoto. Since it was used for MONKEYOEMEngine, it was only for me to use Wiring's parts removal and electrical system. Wiring diagram is also confusing compared to Posh. View detail
Fits: HONDA CUB90, HONDA CUB 93- C50-040001- *Except for Custom, HONDA LITTLE CUB AA01-3000001-, HONDA CUB70 , HONDA LITTLE CUB C50-4500001-
A reasonable quality.
I used it for LITTLE CUB.
The accuracy of the Connector was bad and I could not connect well with Harness on the car body side.
It is caution because it will be damaged if it is inserted forcibly.
Valve could be removed and plugged in but Valve's holding down
Because it is Spring and the Connector is stiffly stuck
There was a clear ski that will return well. It is necessary to confirm that the connection is not defective
View detail
Fits: HONDA DAX, HONDA MONKEY
Processing mistake
A hole Hole 6 in B hole φ 6, A hole φ 6 with B hole φ 8 Quantity : Pair (for Left and Right) It was asymmetrical View detail
MeterBody diameter about 4 mm Small
APE & for MONKEYOEM and Other Company ProductHeadlight case are not fit.
The reason is that the diameter of MeterBody is about 4 mm Small. Rubber packing is also small in size, so it needs advertising things.
Because it is inexpensive, maybe it can not be helped?
View detail
It is cheap..
If others tighten as well as being reviewed, Engine Starter Motor will not function.
I ordered Honda OEM after this, but the construction is completely different. Since the price difference is about 1000 yen, I recommend using OEM Product
View detail
Fits: HONDA APE 50, HONDA GORILLA, HONDA MONKEY
if attached [ by hidden exclusive use like an attachment wire Spring ] at the time of attachment -- -- it is kind. It is loose if it is a pure wire Spring. It can be satisfied except it.
if attached [ by hidden exclusive use like an attachment wire Spring ] at the time of attachment --
-- it is kind.
It is loose if it is a pure wire Spring.
It can be satisfied except it.
View detail
Fits: HONDA MONKEY
Since it only exchanges that it is pure, attachment is easy. Since an one-place BALI was on back side, it deleted with the File. Meter display is higher -- it is felt like. For the moment, it is satisfaction at the Cost performance.
Since it only exchanges that it is pure, attachment is easy.
Since an one-place BALI was on
back side, it deleted with the File.
Meter display is higher -- it is felt like.
For the moment, it is satisfaction at the
Cost performance.
View detail