Reviews
Emblem is the best.
"Small" I installed it, but it is nice. Because I turned on Down fender, I lighted but I was lonely, but I feel tightened when Emblem is attached. I like it. It is easy to install, it was attached without any processing etc. View detail
Cost performance is no problem!
Change from OEM's Tank
Even if Tank cap is brand new, Gasoline leakage will not heal
Buy and purchase Tank and make Gasoline full Tan and Gasoline around Cap around steps!
That?
Rocking when you shake Cap by hand.
In a hurry to the packing department of SUPER Viva Home!
When putting a little thick Packing between the attached Cap and Packing, the backlash disappeared and Gasoline did not leak out.
Because it was super cheap compared with OEM, how about this place?
Since Fuel Cock is different from OEM and Hose installation position, it is short and does not reach if there is no new Fuel Hose!
View detail
It's tolerable..
I used DAYTONA 8 cm Long Swing Arm with a combination of 280 mm Rear shock.
Protection Seat is affixed to parts, Woundetc. There was not, BALI of the cut is amazing! Let's pay attention to injury.
There is no problem with the installation itself.
Although it may be attached as it is, in order to eliminate interference between Tire and Fender at the time of Stroke, we added a thin Washer instead of Color at the top of the Fender to earn a height.
Color not used sandwiched Plastic to attach Number under Tail lamp to retreat behind.
When the interference between Fender and Number is subtle, you can secure some clearance if you loosen the Carrier's installation Bolt once, raise the rear end gently and close it (^o^)
View detail
This price seems to be convincing quality.
Rust in Tank almost none at all. Serve.
Just paint was okay, there was a lack of small paint in the part under TankLeft.
I think that something was hit by luck. Since I purchased it on the premise of my own painting, there is no problem privately.
Installation is from Kore, but I thought it was a good item for the price.
View detail
Fits: HONDA MONKEY, HONDA DAX
Emblem I wanted to attach from before
Although I wanted to attach from before, I did not know whether to attach to Fork outside the company, but I was suffering from purchase, but since we were likely to lose BigPoint, purchase unexpectedly. Arrived on the same day and installed.
Offset was also changed Fork but safely wearing. Bracket processing was also Beauty. The gap with Fender interfere at Limit, but it is a satisfactory item.
View detail
Fits: HONDA monkey, HONDA monkey
Brand of trust
Tank installation Bush was damaged considerably and I was sore so I purchased Minimoto's Rubber Bush. Minimoto's merchandise offers something better than the price cheaply so I really appreciate it. I do not know until durability is ready for future use. View detail
We replaced Emblem from Small to Large.
I was wearing EmblemSmall so far, I wanted a little more presence and replaced it for Large. This product, Bracket installed is Stainless Steel Very texture is very satisfied. View detail
I own a 2015 Skyteam 50 with a 125cc engine.This product fits perfect on my monkeybike replica, just as a original piece would.
I own a 2015 Skyteam 50 with a 125cc engine.This product fits perfect on my monkeybike replica, just as a original piece would. View detail
Better than OEM
OEM reassignment was also stupid and I purchased it because there was also rust on the back. I have a high CostPuff performance and I am satisfied.. We also bought Muffler together. View detail
It was cheap and uneasy - -
I added Key here because it is troublesome when refueling.
Used for OEM 5 L Tank of MONKEY.
Gasoline bleeding, leakage etc. No, I am using it without problems.
With future durability, Cost performance is the best.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
It was price suitable..
I decided to purchase because it is cheap. Although it was not easy to install, it is a range that can be regarded as good if you consider the price.
Mounting Hardware does not depend on it and Wrinkle was included, but it is Level which I do not know unless you see it nearby.
It looks good but the ride is not good.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
Invisible necessities?
When exchanging with Head Lights of 4 LMONKEY, there is no place to accept the Key cylinder, so I used it to relocate the Key cylinder under the Top Bridge.
I do not see it usually but I think that it will be a troublesome part if it does not exist.
View detail
Fits: HONDA MONKEY, HONDA MONKEY
I like it ♪
I posted mistakenly for the previous Impre, another product. Excuse me. Wae Big, please delete.
Essence
I installed a Swingarm of 10 cm long, but naturally I bought this item because Tire has gone over from Fender.
As you are saying, the installation was a bit Large strange but there was a difficulty ♪
View detail
Fits: HONDA MONKEY, HONDA MONKEY
a little!
In the Instruction Manual, it is written that Bracket is installed using the Silencer mounting Bolt hole of the Exhaust System, but there is fixed it with Bolt and Handlebar several times as Quantity : Pair (for Left and Right) When you shake it, the Silencer attachment Bolt hole of Frame has deformed to the outside.
I think I will change the installation position next time.
View detail
Fits: HONDA monkey, HONDA dachshund, HONDA monkey, HONDA dachshund
It was not available anymore by OEM Product (Tears)
While restoring 6 VGORILLA, there was Battery case, but Band was not available
So I searched Webike, it was for DAX but it was able to be used for GORILLA without problem
With this, we will not discontinue Tie Wrap every time
View detail
Because the price is cheap
Purchase to change Image because the price is cheap. I did not expect so far, but the price suitable finish. Plating had a large Garbage biting and I was worried a lot. Processing of the attachment part is not so satisfactorily OEM same etc.. I think it is difficult to install.
I do not care because I am processing and installing as Rear Fender.
It is a satisfactory finish if you look nice.
View detail
CB 750 FOUR concession
Because something around Front felt lonely, if you are looking at the age of love the eldest son, Lame Ki! Buy it on the second son love machine! Tightened looks best! View detail
Fits: HONDA MONKEY
I like it ♪
I painted Tank myself and bought this Emblem to put in one point ♪
Image changed, I am very satisfied ♪
Everyone try Imechen (^^) /
View detail
Fits: HONDA MONKEY
Image has changed ♪
I painted Tank myself and bought this Emblem to put in one point ♪
Image is according to.
The price is affordable and Large is in great shape ♪
View detail
Fits: HONDA APE 50, HONDA NS-1, HONDA NSR80, HONDA APE 100, HONDA NSR50
If it converts to Wide!
In order to widen Front fork 's Top Bridge, Fender also needed Bracket for Wide purchase. The price is not high so it is recommended! View detail