Reviews
Fits: HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
5550
I purchased a footrest (Product # 7624) for my Honda Monkey, but my model has an engine lock when driving with the footrest not removed. To bypass this blocking, I needed a decoy. I am very pleased that the manufacturer took care of this problem!!! I had to work hard with the installation (this is due to the difficulties of getting to the connector), but everything was successful. As a result, it works great! I am very satisfied!!! View detail
Fits: HONDA glom, HONDA PCX150, HONDA PCX125, HONDA LEAD125, HONDA DIO110
A simple part that helps to bypass a faulty switch
About quality and texture, I can confirm that the quality is great and that the materials used are a combination of white moulded plastic for the plug, copper spade fittings for the electrical connectors and black insulated wiring for the jumper wire. About the feeling of use, This simple part has helped to bypass my faulty side stand switch and get my Grom up and running again. Products to buy together, While working on the wiring on the bike it would be ideal to also add a USB charger to your cart for the convenience of charging your mobile phone. Difficulty of installation, I can say the fitment of the side stand switch canceller for my installation was very easy due to the open access to where this plugs into the main harness and the plug and play design where no modifications is required. Cost performance and comparison with other products, The pricing of the product is great. You receive a product made from quality materials that does away with the original part that can fail causing problems and saves weight and space, also available from Kitaco at the same price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Cheap!
MONKEY 10Inch, 9cm RONSUI is just right.
The only glitch is a subtle Gap in the ground surface.
I also use OEM Product Bolt and Nut to prevent Bolt from falling out, just in case.
This product is fixed only for Bolt.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
ขาตั้งข้างมินิโมโต ใส่มั้งกี้ 50 รูปทรงการออกแบบดีครับ แต่เนื้ออลูมิเนียนยังนิ่มไปนิดครับ แล้วอีกอย่าง ตัวหนอนที่ล็อคน๊อต ถ้าล็อคไม่ดีจะหลุดหายง่ายมาก View detail
I finally found a STAND that fits the length!
Used on RZr with modified suspension.
This is the third Size purchased via the company's 275mmAluminum→255mmSteel.
I finally came across a STAND that fits the length.
However, so far, STAND has not been overloaded by standing up too much, but this time it will be overloaded to some extent.
Since it is for MONKEY, the first question is whether it is strong enough or not.
View detail
Side Stand Length Adjustment
I have been using their 275mm for MONKEYAluminum side stand on my RZ250R, but it is too long and seems to fall over against me, so I bought this one, which is 20mm shorter.
Note that the bolt is fastened from the reverse side, so it cannot be attached unless there is space on the reverse side.
The RZr cannot be fitted with the supplied Minus Volt because the chamber gets in the way, so we used an OEM Hexagon Bolt and managed to fit it.
As a result, installation was no problem at all, but Alignment was almost the same as the 275mm STAND.
Was the original Aluminum Stand scraped and shortened?
Well, this is also the best part of the actual matching diversion.
Good thing it was inexpensive.
View detail
Used for SUPER CUBC125
Side Stand of c125 is a little short or the body tilts a lot.
However, Side Stand for C125 is not available.
Utilize Side Stand for other car models
It does not come with Adjuster, so you need to measure the length properly.
Must be purchased.
View detail
Fits: HONDA glom, HONDA PCX150, HONDA PCX125, HONDA LEAD125, HONDA DIO110
easy and convenient
It is convenient to start the Engine with the Side Stand out by simply installing it with Couplet-on.
It is a simple but useful product.
View detail
Fits: HONDA MONKEY (FI), HONDA MONKEY (12V), HONDA GORILLA (12V), HONDA MONKEY 3.1PS (6V), HONDA GORILLA 3.1PS (6V), HONDA MONKEY 2.6PS (6V), HONDA GORILLA 2.6PS (6V)
KSR80 Sides Land
I was wondering if I should paint it or replace it with custom parts, but this product looked like it could be used, so I bought it at my own risk. I was wondering if I should paint it or replace it with custom parts.)
It was almost the same length as the OEM one, but the KSR one was slightly angled at the base, and that was the part that bothered me.
The KSR is located on the outside, so you will need to modify the screw so that it is on the front side.
Also, although the screw size of the mounting part is the same, the Bolt of this product cannot be used (it can be used if the diameter is made smaller), so I used the KSR OEM as is.
This product has a zagged surface, which interferes with the flange of KSROEM's bolt with flange, and the shaft of this product's screw is large, so the hole on the outside is between φ1 In order to use KSR's screw, you need M10 Washer or Spacer that can fit in the counterbore. If you want to use KSR's screw, you need M10 Washer or Spacer.
I used a grinder to grind off a portion of the product so that the KSR Bolt flange would not interfere.
I also adjusted the thickness of the Washer.
When I raised the stand, the position of the end of the KSR would interfere with the Swing Arm, so I set the tap up so that it would hit the end a little closer to the end and adjusted the stop position with the bolt.
That way, interference was avoided.
Lastly, the lack of an angle makes the vehicle more upright when the STAND is applied compared to the OEM.
It took a little work, but I was able to install it successfully.
Diversions are at your own risk.
It looks great and I'm personally satisfied with it.
View detail
Fits: HONDA MONKEY (FI), HONDA MONKEY (12V), HONDA GORILLA (12V), HONDA MONKEY 3.1PS (6V), HONDA GORILLA 3.1PS (6V), HONDA MONKEY 2.6PS (6V), HONDA GORILLA 2.6PS (6V)
Diverted to RZ250R
I diverted it to 51L with 3MA feet front and rear.
I have no problems at all with the fitment and can use the included Spring, although it is a little weak.
You can also gain more clearance with the Chamber than with OEMSTAND, and you don't get hit by the Chamber anymore.
I think it depends on the setting of the undercarriage, but I park with care on the slope because it is a little too long impression and standing.
It may be too long to use on a body with NORMAL suspension.
View detail
for 12-inches, but I think it's better to actually measure it.
I bought this for when I installed NSR50's 12Inch wheel and NSR50n's Swing Arm on my MONKEY.
It is Exactly in the length, but because it changes a lot by the length of the Swing Arm, it seems to be better to buy it by actual measurement.
In the photo, Right is for 10-inchesSTAND, and Left is STAND of this product.
For the price, it's surprisingly rust-free and durable.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
10InchMONKEY
10InchTire.
10cm Long Swing Arm, 280mm suspension.
This Spec. is the shortest and just the right length.
If you look carefully, the texture is worth the price.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
To a monkey.
If you look at the details, there are some rough spots in the finish, but I don't think there are any problems. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
6VGORILLA.
It's just right for a 10Inch LowdownSpec.
The texture of Aluminum is not bad.
Poof...
View detail
Fits: HONDA glom, HONDA PCX150, HONDA PCX125, HONDA LEAD125, HONDA DIO110
It is easy to install
It is very convenient to start the engine with the side stand still in place. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Cosmo!
Purchased in a hurry due to the replacement of the rear suspension. There is a Wallet situation and this product was chosen.
I installed it on a 280 suspension with an 8InchFront 4cm and a 10cm Long RearMinimoto 10cm Long, and although the base is a little unlevel, it works perfectly fine as a STAND.
For the price, it's more than I expected!
View detail
Fits: HONDA MONKEY (FI), HONDA MONKEY (12V), HONDA GORILLA (12V), HONDA MONKEY 3.1PS (6V), HONDA GORILLA 3.1PS (6V), HONDA MONKEY 2.6PS (6V), HONDA GORILLA 2.6PS (6V)
The shine of light and aluminum is beautiful STAND!
important item
[Was there anything that disappointed you?
The use of this product is not compatible with the Material:It was easy to work with aluminum, and it was as expected
Do you have any wishes or improvements you would like to make for the Manufacturer?
I think it would be easier to purchase a non-conforming product if information such as the diameter of the mounting bolts were included
[Do you have any products to compare it to?
The company's steel Side Stand, which I was worried about because of the many variations in length
Frequently Asked Items
What made you decide to buy?
Material:Because it is made of aluminum, it is easy to process, light and looks good It was beautiful and the price felt right
How was your experience with it?
The Bolt of the spring hook was moved to the other side of the spring hook because it is not applicable, or the ground surface was shaved We have done a number of things, including the following, but the Material:Aluminum was easy to work with
Was the installation difficult?
I was able to use it on a car model that is not applicable with the above minor modifications
【Please tell me the installation point and hang】
Screw is provided to prevent the Large trapezoid bolt from loosening After the last tightening, the screw should be used to prevent the Large Clamp Bolt from loosening
[Was the Instruction Manual easy to understand?
Easy to install for simple Parts, no need to look at the Instruction Manual It was
[Included Parts:were they on?
Spring, Large Bolt, Screw, Spring hook Bolt It consists of
[Others]
I was lucky enough to be able to use it even though it was not applicable The Side Stand is as light and beautiful as it looks, and I was able to install it
View detail
*for MONKEY
As the product name suggests, it's for MONKEY
I used it on my CD125T
Honda's SmallEngine Displacement Volume vehicles are Large bodies I tried it because it's the same, but it was pontooned
… but after a year or so of use for a vehicle that weighs more than 1.5 times as much as the car, it bent into a gnarled shape I'm done
Fortunately, we were parked near the wall so there was no Damage to the vehicle, but everyone be careful about diverting it! Let's laugh
It's not a bad product by any means, so if you're around MONKEY, DAX, or CHALY, you'll be able to find it I don't think it's a problem
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Good quality for the price!
I was using Aluminum Short Side Stand for the groms, but it was not strong enough When I ride the Ferry, I changed it to this product as a countermeasure because I don't want to be tied down and broken when I ride the Ferry The stands switch is mounted on the opposite side of the switch, so the screw holes are not required I installed it on a normal mounting surface with Penetrating I am happy with the rigidity and texture I purchased another Stand plate to change the angle of the ground plane View detail
It's not a problem to use
First, my GORILLA is a 4 cm Long Swing Arm, 110-80-8Inch I cannot use DAYTONA 285mm Rear Suspension Spec I looked at the Impression and measured the Side Stand that is now attached to it and it was 175mm It is regrettable that there is no hole in the moving part of sensor, so it needs some processing It is View detail