Reviews
Fits: HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
5550
I purchased a footrest (Product # 7624) for my Honda Monkey, but my model has an engine lock when driving with the footrest not removed. To bypass this blocking, I needed a decoy. I am very pleased that the manufacturer took care of this problem!!! I had to work hard with the installation (this is due to the difficulties of getting to the connector), but everything was successful. As a result, it works great! I am very satisfied!!! View detail
Fits: HONDA glom, HONDA PCX150, HONDA PCX125, HONDA LEAD125, HONDA DIO110
A simple part that helps to bypass a faulty switch
About quality and texture, I can confirm that the quality is great and that the materials used are a combination of white moulded plastic for the plug, copper spade fittings for the electrical connectors and black insulated wiring for the jumper wire. About the feeling of use, This simple part has helped to bypass my faulty side stand switch and get my Grom up and running again. Products to buy together, While working on the wiring on the bike it would be ideal to also add a USB charger to your cart for the convenience of charging your mobile phone. Difficulty of installation, I can say the fitment of the side stand switch canceller for my installation was very easy due to the open access to where this plugs into the main harness and the plug and play design where no modifications is required. Cost performance and comparison with other products, The pricing of the product is great. You receive a product made from quality materials that does away with the original part that can fail causing problems and saves weight and space, also available from Kitaco at the same price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Cheap!
MONKEY 10Inch, 9cm RONSUI is just right.
The only glitch is a subtle Gap in the ground surface.
I also use OEM Product Bolt and Nut to prevent Bolt from falling out, just in case.
This product is fixed only for Bolt.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
ขาตั้งข้างมินิโมโต ใส่มั้งกี้ 50 รูปทรงการออกแบบดีครับ แต่เนื้ออลูมิเนียนยังนิ่มไปนิดครับ แล้วอีกอย่าง ตัวหนอนที่ล็อคน๊อต ถ้าล็อคไม่ดีจะหลุดหายง่ายมาก View detail
I finally found a STAND that fits the length!
Used on RZr with modified suspension.
This is the third Size purchased via the company's 275mmAluminum→255mmSteel.
I finally came across a STAND that fits the length.
However, so far, STAND has not been overloaded by standing up too much, but this time it will be overloaded to some extent.
Since it is for MONKEY, the first question is whether it is strong enough or not.
View detail
Fits: HONDA glom, HONDA PCX150, HONDA PCX125, HONDA LEAD125, HONDA DIO110
easy and convenient
It is convenient to start the Engine with the Side Stand out by simply installing it with Couplet-on.
It is a simple but useful product.
View detail
Fits: HONDA MONKEY (FI), HONDA MONKEY (12V), HONDA GORILLA (12V), HONDA MONKEY 3.1PS (6V), HONDA GORILLA 3.1PS (6V), HONDA MONKEY 2.6PS (6V), HONDA GORILLA 2.6PS (6V)
Diverted to RZ250R
I diverted it to 51L with 3MA feet front and rear.
I have no problems at all with the fitment and can use the included Spring, although it is a little weak.
You can also gain more clearance with the Chamber than with OEMSTAND, and you don't get hit by the Chamber anymore.
I think it depends on the setting of the undercarriage, but I park with care on the slope because it is a little too long impression and standing.
It may be too long to use on a body with NORMAL suspension.
View detail
for 12-inches, but I think it's better to actually measure it.
I bought this for when I installed NSR50's 12Inch wheel and NSR50n's Swing Arm on my MONKEY.
It is Exactly in the length, but because it changes a lot by the length of the Swing Arm, it seems to be better to buy it by actual measurement.
In the photo, Right is for 10-inchesSTAND, and Left is STAND of this product.
For the price, it's surprisingly rust-free and durable.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
To a monkey.
If you look at the details, there are some rough spots in the finish, but I don't think there are any problems. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
6VGORILLA.
It's just right for a 10Inch LowdownSpec.
The texture of Aluminum is not bad.
Poof...
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Good quality for the price!
I was using Aluminum Short Side Stand for the groms, but it was not strong enough When I ride the Ferry, I changed it to this product as a countermeasure because I don't want to be tied down and broken when I ride the Ferry The stands switch is mounted on the opposite side of the switch, so the screw holes are not required I installed it on a normal mounting surface with Penetrating I am happy with the rigidity and texture I purchased another Stand plate to change the angle of the ground plane View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Since the completion of attachment was carried out, it is a report. Finishing is better than anticipation and this price is large satisfaction in this quality. Since it is hard to think that the problem of quality crops up in a Side stands, there is no br
Since the completion of attachment was carried out, it is a report. Finishing is better than anticipation and this price is large satisfaction in this quality. Since it is hard to think that the problem of quality crops up in a Side stands, there is no brand name like a domestic Parts brand item, but in the direction of substance over form, it is recommended. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
a wide tire is used, and it always falls and meets -- although it came out and was unstable, it is safe now. At this price, it was shopping cheap with adjustment.
a wide tire is used, and it always falls and meets -- although it came out and was unstable, it is safe now.
At this price, it was shopping cheap with adjustment.
View detail
This stand from minimoto is great quality and at a good price. I have used it on my custom 1976 Honda xl75 cafe racer project. The stand is steel and is strong with good paint quality.
This stand from minimoto is great quality and at a good price. I have used it on my custom 1976 Honda xl75 cafe racer project. The stand is steel and is strong with good paint quality. View detail