Reviews
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Minimoto MONKEY Handlebar Clamp
I purchased this product because I replaced the 6V OEMMONKEYFront fork with a 6V GORILLA, and I wanted to install the HURRICANE Mini condor that was attached to the GORILLA, but I knew that the for MONKEY Top Bridge cannot be attached to the GORILLA's Handlebar Clamp, so I purchased this product. I decided to purchase this product because the position and diameter of the mounting holes of the Top Bridge are different between MONKEY and GORILLA, and the price is reasonable. When I installed the Handlebar Clamp, the position of the Handlebar was about 10mm forward, so I can use it without any problem. View detail
Pipe Handlebar/Clamp, but as a Fog Lamp/Clamp.
I was looking for a clamp for the Fog Lamp, and since the Pipe diameter is 22mm and it is an M10 Bolt, I thought it might work, so I did some research and found that it might work, so I purchased it.
I wanted to hang it straight down from Clamp, so I was satisfied.
Of course, Bolt and Nut are purchased according to their length at the time of installation.
View detail
I'm glad I bought it, it's a RECOMMENDATION!
[How is it used?
Purchased for MONKEYZ50J.
I bought a high throttle kit because I couldn't pull the Axel with OEMThrottle when I used MikuniVM22 for Carburetor.
Was the one you received as per Image?
I bought it because the price was low, and I have the impression that it is better made than I expected. It has a simple structure, but I am satisfied with its solid construction. I think it is a product with perfect cost performance.
Was the installation difficult?
I was a bit confused at first because I did not have the Instruction Manual, but all I had to do was remove the screws from the cover of the Throttle and insert the wire into the handlebar.
You can find out more on YouTube and other sites.
Just a note, the handlebar needs to be replaced if you want to use it with 4LMONKEY's First Model Type. the brake lever is welded to the handlebar, so the high throttle kit will not fit properly.
How was your experience with it?
It worked perfectly. I like the way the Throttle pulls and returns. I think it's a good product at a reasonable price, so I think it's worth a try.
[Included Parts:were they on?
It comes with a Grip for LeftHandlebar.
[Was there anything that disappointed you?
Nothing in particular, but if I had to say, it would have been nice if the Instruction Manual had been included.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Handlebar Up Type changed to long wire
The product is for MONKEY, but it can be used with Super Cub custom Handlebar Up TypeSpec. and it is good to replace it with stainless mesh. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Fitted to a Gorilla
ive fitted this to a Honda Gorilla that is black and it ties in well, paint was in good condition and the product was exelent View detail
Size matched Connector is a Honda car (GORILLA) does not seem to fit the
Size matched.
Connector is a Honda vehicle (GORILLA) does not seem to fit the
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Polished
Purchased due to concerns about peeling paint.
Recommended
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
OK for Universal
[How is it used?
I chose this one because my current Switch was not working well and I wanted to replace it.
I chose the cheapest price, and I trust Minimoto products to a certain extent because they are not that hit or miss, but they are not that miss either.
Was the one you received as per Image?
It is exactly as shown in the image. It is not as chunky as I had imagined.
Was the installation difficult?
Instruction Manual included.
How was your experience with it?
I thought the lights were going bad because of the Switch box, but it didn't change when I changed it. It seems to be the Harness on the body side. It's so lame....
[Included Parts:were they on?
Instruction Manual was included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Wiring is made quite long, so it is also Universal.
View detail
Inexpensive, but the texture is good.
This product was changed from HondaJAZZ OEM. All you have to do is remove the Nut on the back, remove the OEM, and install this product with the included screw. It looks great and shiny. The only thing is that the height is the same as the OEM, so it would have been nice if I could have bought one size larger (missing). View detail
a little cheap-looking
Bought it to make a Bar handle for HondaTODAY.
Spec. so there is no problem to install.
It looks a bit cheap.
The price is right, so I'm satisfied.
View detail
For Headlight Bracket
I used it for TW200 HeadlightCustom
It's helpful to have a variety of diameters to choose from
TW has a Fork diameter of 33mm, so it's a Quantity:2pc. I bought a set
It seems to be quite beautiful like an Aluminum Cut-out, and the Anodized seems to be hanging
Only the Screw hole had a little Rose, so I think it's better to put the Tap through it
Headlight Bracket, Meter and Brake's Reserver Because it can be used as a clamp for various mountings, it is my personal standard parts
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
The product is a good one
I wanted to use PASSOL as a squeezing handlebar, so I diverted it It is easy to fit in Cover if it is a little more thin meat It is easy to fit in the cover if it is a little more flesh View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It's not a special product, but it comes on properly
I bought this because I wanted to put on a squeezed hand
It hits the Cover a little, but it fits somehow Processing is not necessary, but a little effort is needed for installation
View detail
Fits: HONDA GORILLA, HONDA DAX, HONDA MONKEY
Truly Chinese
Shopping for purchase unavoidably.
Miscellaneousness of details, badness of Fitting.
It was rumored..
The only good thing is that the price is cheap.
I do not think I will ever buy it in the same Manufacturer.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100
Personally fairly satisfied!
I was concerned about the height of Front fender from the time of purchase of APE and thought that I wanted to lower it somehow
Compared to other Down fenderKit, etc. Compare it and see it look like it.
Although it is comfortable to install, it is recommended not to lie down and to remove the Front tire and even to slightly shift it
View detail
Work great on my 1972 z50
Fits great, quality looks good and they appear to be well built and strong. Also say "Made in Japan" on the side. And the hardware that came with mine is silver and shinny and it did not come with any washers. View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100
I think Cool in Simple
Because the installation is not good, because the inside of the Fork is short in dimensions, if the Rubber of about 1 mm is not caught, the Front tire does not turn, I like Rubber scissors, no problem, it is pretty cool so I like it. View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100
Maybe the least expensive
It is probably one of the cheapest Stabilizers.
"One of the most" Although it is an escape used by the advertising industry, I think that it is really cheap.
I thought that Made in China, I was surprised with the engraving called JAPAN.
Although it is named Bracket, the thickness is so perfect that it firmly attaches,
Stabilizer effect comes out. The stability feeling at the time of Breaking surely increased.
Of course Down Fender can also be batched and become fearless.
I feel good texture without saying. Strongly speaking it's a piece structure so install it
It is somewhat difficult to exchange the Bridge part with Carbon and play
I can not do it.
Recommended for people who want to upgrade performance, not to mention fashion nature.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Handlebar
I wanted to unify Silver around Handlebar so I installed this Switch
It was solid making with Aluminum body.
I think that it will be a little cheaper
View detail
Affordable Custom
Because it changed to Large texture Carburetor, it became impossible to correspond with Normal cable, so we chose Cable exchange by looks and functions. Installation was easy. View detail