Reviews
Fits: HONDA MONKEY
OEM Type Exhaust System
I am satisfied with Large at this price!
The texture is just fine.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Original type exhaust for monkey - cheap and good
This exhaust was under my honda monkey z50k3 minitrail. Cheap exhaust that fits perfectly. Can't say much about it, does what it has to do for a good price. View detail
Used for CD50S.
I used it on my CD50S.
It is for DAX, but I bought it because I like the shape of Up type.
Installation is not attached as it is.
I bought an L-shaped bracket from Home center and modified it to fit.
The volume and sound quality of the Exhaust System is the same as OEM Product.
I don't think there is a Large difference in driving performance either.
If you like the shape, you can buy it for less than 10,000 yen.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Cool
It's a powerful sound
However, the sound is considerably larger than OEM
I'm not sure about the performance, but I feel like I'm getting better out of it
I'm very happy with the way it looks
View detail
I put it on the SUPER CUB
It's for DAX, but I put it on my SUPER CUB
I bought this one, which is listed for 88cc - 124cc as I was planning to bore up, but In the end, I installed it with 50cc
Maybe it's because the Engine Displacement Volume was NORMAL But the volume was good as well as Smallish
It has a moderate feel to it, and it can be run on 50cc for the time being
Conversely, I think it's a bit underpowered in a vehicle that's being played around with 110cc or something crunchy
Also, the texture was beautiful for the price
Plating on Steel, so it may be tougher for those types that are left outdoors
In my case, I hung it on a Motorcycle Cover for about three months and left it in an uncovered parking lot But it didn't rust
I installed it on a SUPER CUB, not a DAX
The bracket on the back side was quite overwhelming as I managed with some things
I think it needs a little bit of work to put it on properly
As for Leg shield, it was a miraculous Clearance to avoid it
Also, the exhaust system will grow in the Right Side calf area, and But thanks to the Heat Guard, it's not hot at all
I rather enjoy LeftCorner because it allows me to do calf grips
I'm trying to find out if it's possible to attach it to MAGNA50 and other frames with UnderTube It is
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Cospa is good
It was installed as a replacement for a Honda SOLO OEM exhaust system
50cc, carburetor is my impression of the OEM condition
We chose it for the following reasons
1) There are almost no exhaust systems for SOLO, but will MONKEY be available? I didn't know if it would work
I can't afford an expensive trial 。 At this price, even if it doesn't work, you can laugh it off
2) I thought it would be a good fit with the design of the motorcycle
(1)Side Stand interferes when raised, but can be driven
As long as you don't bank on it too much, I don't think it's a problem
2.Silencer's Bracket is not long enough at all
You need to cut a sheet of aluminum or other material to extend it
I think you can use the Bolt on the Seat rail to stop the Seat
3．Baffle is also included, so it's not too noisy, but still has a nice bass sound I am
I'm not sure about the power
It doesn't change much, especially at low rpm
At high rpm, Main jet at 65→70 is just right, and re-binding is 70km It's about
5. it's a beautiful piece of work and I think it's very cost effective considering the price
View detail
Fits: HONDA MONKEY, HONDA GORILLA
It is regrettable that Silencer has rust
There is rust but there is no problem on the performance No price is cheap so I'm wondering if this is something like this?
I was able to install without any problem for mounting ??
Where you get concerned about getting off and Torque is scrapped ??
View detail
Fits: HONDA MONKEY3.1PS(6V), HONDA MONKEY2.6PS(6V), HONDA GORILLA3.1PS(6V), HONDA GORILLA2.6PS(6V), HONDA MONKEY(12V) Fitting frame number AB27-1000001-, HONDA MONKEY(12V) Compatible Frame No. Z50J-2000001-, HONDA GORILLA (12V) Fitting frame number AB27-1000001-, HONDA GORILLA (12V) Compatible Frame No. Z50J-2000001-
Sounds good
I exchanged the Exhaust System for the first time.
Although it took a while, I made it properly.
The sound is also quite good.
Instruction Manual somewhat difficult to understand, but I guess there was not much trouble.
Idling has stabilized somehow better than NORMAL.
View detail
Fits my 1972 z50ak3 perfect. Looks good and sounds good. I cannot say if it helped my original 49cc engine with performance or not. It is nice that you can still use it when you upgrade to a bigger engine in the future like a Lifan one hundred ten cubic c
Fits my 1972 z50ak3 perfect. Looks good and sounds good. I cannot say if it helped my original 49cc engine with performance or not. It is nice that you can still use it when you upgrade to a bigger engine in the future like a Lifan one hundred ten cubic centimeter or big bore eighty eight cubic centimeter kit. For the price it is a great deal that cannot be beat. However, it only gets four stars because the inside of the pipe was welded poorly and needs to be ground or sanded. View detail
Fits: HONDA MONKEY
Although omission is good, the finish is slightly miscellaneous
I can not complain so much because it is cheap, but the finishing is somewhat sloppy and Plating is also diluted.
Obviously rusting wounds (← I can not convert why) So, Body is quick
I painted Black.
I wonder if the sound quality is a bit vulgar ~. MONKEY's OEMExhaust System has the early 12V
I remembered that it was a rounder sound like Turnul ....
Compared to that it is like Bababa! There is no classy feeling.
DAX / Feeling close to CHALY's Tutinoko Exhaust System.
Well, since the caliber is Large, it can not be helped.
The volume is modest and I do not hear it so much (* It is personal impression)
The omission is as good as not compare with OEM. Ultimate as an OEM of 12V early
Just putting High Camshaft just laughed and clogged up, but Minimoto
Even with 88 cc it is completely usable. There is no feeling that the top does not stretch.
Although there is anxiety about durability and weather resistance, desolation is good with Normal look Exhaust System desires
I think that it is not a bad choice.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Awesome note - only thing I needed to change was the bolt holding the rear shockers onto the bike, and the kickstarter. The factory bolt through the shockers wasn't long enough to accomodate the new hanger, and the stock kickstarter hits the exhaust way
Awesome note - only thing I needed to change was the bolt holding the rear shockers onto the bike, and the kickstarter. The factory bolt through the shockers wasn't long enough to accomodate the new hanger, and the stock kickstarter hits the exhaust way before you manage to start the bike. But now that I've solved both of those problems the bike sounds AWESOME! Look me up on monkeybikeoz.com.au if you want to see more pics.. my handle is 'shoggothe' and I plan on buying a few more parts yet from webike! :) - Adam View detail
aesthetically it is a very nice with weld lines reaching the outlet exhaust. Easily installed in my Honda Dax st70 gives a very pretty picture. Its affordable price. Their sound gives the bike a more powerful appearance and some improvement in the relief
aesthetically it is a very nice with weld lines reaching the outlet exhaust. Easily installed in my Honda Dax st70 gives a very pretty picture. Its affordable price. Their sound gives the bike a more powerful appearance and some improvement in the relief and development 70cc engine. A good product that I recommend for any mini bike Honda. no installation problems and the steel quality is good. Good product for the Minimoto brand. View detail
Fits: HONDA MONKEY
I love the design with original look, i use it in 100ccm cylinder and it sound so good, the chrome is so good so the price too.
I love the design with original look, i use it in 100ccm cylinder and it sound so good, the chrome is so good so the price too. View detail
The quality of this exhaust os very good and its appearence is excellent.The exhaust make a deep and beutifull sound and i think that the engine works very good with this exhaust.
The quality of this exhaust os very good and its appearence is excellent.The exhaust make a deep and beutifull sound and i think that the engine works very good with this exhaust. View detail
Very good exhaust.Good quality and very nice look. It make a very deep beutiful sound.The motor work excellent with this exhaust.
Very good exhaust.Good quality and very nice look. It make a very deep beutiful sound.The motor work excellent with this exhaust. View detail
Fits: HONDA MONKEY
It purchased in order to use it for a 110-cc Engine. This price was enough as this Quality. Sound is also fairly quiet and it has satisfied it dramatically. Although durability was unknown, it was good shopping.
It purchased in order to use it for a 110-cc Engine. This price was enough as this Quality. Sound is also fairly quiet and it has satisfied it dramatically. Although durability was unknown, it was good shopping. View detail