Reviews
Good
I thought overseas shipping would take longer than expected, but it was delivered quickly.
I drove it for a few months after installing the muffler and there was no problem with the product.
The exhaust sound is nice. However, the finish of the muffler paint is
There are some parts that are a bit disappointing, but other than that I am satisfied with everything.
When purchasing a muffler, the outlet angle needs some processing ---------------------------------------- ------------------ I thought it would take longer than I thought overseas delivery, but it was delivered quickly I've been driving for a few months after mounting a muffler It's good . However, the finish of the muffler painting There's a little unfortunate part. I'm satisfied with it. When purchasing a muffler, you need some processing angle angle. Powered by Google Translator
View detail
For replacement of inside diameter!
I changed from a 16-pie to a 21-pie! The sound is better and it runs smoother. View detail
Fits: HONDA DAX, HONDA GORILLA, HONDA MONKEY
It's working just fine
I can use it normally as Exhaust Gasket. No problem at all. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Good quality and sound from minimoto.
I have two of these pipes. I use them on 1969 k1 rigid framed with 108cc stroker kits. They sound good without the baffle and not too loud. Bike runs great with them. The finish and fit is very high quality. Polished nicely. Beautiful welds. View detail
Necessary and sufficient performance
The engine side mounting screws are difficult to remove without removing the UnderBracket and other parts. Other than that, the Large is strong enough for anyone. The performance of Large and Single4Stroke engines' exhaust systems are all similar. Silencer and exhaust pipe made of steel are impossible. There, the high price by name makes me doubt the thinking of those who buy them. As I mentioned earlier, two horsepower and three horsepower are no different. It is definitely better than rusting. As for the volume, it is not noisy at Idling and is at a level that is not a problem. It is not so loud at high rpm, but I don't think it is noisy. 100km is enough with the meter reading of ct125. Fuel consumption is not much different from NORMAL. If the one you put on is worse than NORMAL, please re-educate the Right hand. View detail
Fits: HONDA MONKEY
MINIMOTO MONKEY TYPE C STD Exhaust System Φ28mm Chromium Plating
Acquired for Honda Monkey. It's been a long time since I've thought about replacing the muffler. MINIMOTO liked the exterior (a huge plus in similarity to the original muffler). There are minor questions about lacquer treatment, but overall everything is very kind. I was delighted with the completeness, the whole range of necessary metizas and gaskets. The installation went perfectly (I think even the schoolboy will manage). And to the question of sound - it is beautiful, light and soft bass. I'm happy with the result, sorry I couldn't find a similar offer for the second moped (Honda Little Cub)... View detail
Great price for a high quality unit
One of the cheapest exhausts for the ct125 with a great quality finish and welds, I'm decently surprised. Pretty quiet too, for louder enthusiasts, you can remove the end baffle which will definitely make it a bit more loud. 9/10 View detail
tingle free
It can be rolled without wetting.
It does not tingle at all.
However, it might be better to wash the Motorcycle after rolling it up because it gets fluffed up.
Included are Rubber Gloves and AluminumTie Wrap.
The included AluminumTie Wrap is not tight enough, so you should purchase the Home centerAluminumHose Band in advance.
View detail
Fits: HONDA SUPER CUB, HONDA LITTLE CUB, HONDA SUPER CUB, HONDA SUPER CUB
Versatile Exhaust System.
I really wanted to try an external exhaust system again, and I was looking for an exhaust system that was designed to be large and focused on city driving performance.
4MINI is famous for Minimoto's Exhaust System.
good point
LongMegaphone Type, so the OEM look of the CUB will not be compromised.
If you wear a special baffle, you can run without worrying about the neighborhood.
Easy to handle at medium speeds than other external models. Suitable for city driving.
The finish is also beautiful.
Balance between performance and price.
A bad point
High RPM is not good.
I think it depends on personal preference and driving style, but I think the characteristics of the external exhaust system→s low-speed Torque to Large cutoff rather than high RPM is also worthwhile.
We feel that this is an exhaust system that did not seem possible.
View detail
To hide burn marks
I was covering my SR400 with a blanket before putting on the cover, but the other day I accidentally made a scorch mark on the exhaust pipe area…
I bought and installed this Vantage to hide the scorch marks.
The Instruction Manual says that you don't need to put it in water to use it, and I think it's true, the Material was soft and didn't feel sticky.
This is the first time I've seen this kind of product in action. I'm very satisfied.
Included in the package are
ThermoVantage and Instruction Manual
Material:Stainless SteelBand*6pcs
1 pair of thin rubber gloves
View detail
For heat protection of oil cooler
I purchased this product to install an oil cooler, hoping it would prevent heat damage.
I wrapped it around the exhaust pipe of MORIWAKIMX, but we have two FSprocket up and the start was a little weak. It became a little smoother.
I will install the Meter at a later date to see how effective it is against oil temperature.
View detail
Prevent burns!
[How is it used?
In an effort to increase the number of OffLoaders, we are co-owning a CRF125F as a RenBarrel vehicle.
The other day, when I borrowed it at the Race, I was unlucky enough to burn myself with the exhaust pipe when I fell, so I rolled up the Vantage.
Was the one you received as per Image?
As per Image
Was the installation difficult?
I wet it in water and rolled it up with some Overlap.
All locations except the start and end points are fixed with Wiring.
How was your experience with it?
It was my first time wrapping it and it was easier than it worked and didn't sting as much.
[Included Parts:were they on?
It contains 5 Stainless Steel Bands.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I like MINIMOTO's Large that even these parts are prepared reasonably.
View detail
I think it's a good product.
I used it to put the Takekawa Exhaust System on my MONKEY!
It works fine and I can recommend it.
View detail
It looks better now.
I bought this to remove my Tandem Footpeg.
Material:I don't think there is any concern about strength etc. than Aluminum.
With the GSX-R125, I think 225mm would have been a better fit, but Clearance managed to get it to fit, and it looks good now that it is slightly raised.
View detail
Fits: HONDA MONKEY
Cospa strongest
There is no other exhaust system that is this cosmetic.
MONKEY Exhaust System Up Type is the best fit for me.
There are other Exhaust System Up Types, but they don't have Heat Guard or are quite expensive.
The price is phenomenal with the Heat Guard and the quietness is a high point.
There was no screw pitch misalignment, which is common with external exhaust systems.
Large land system is getting LevelUp!
I'm going to try to make the Exhaust System about 30,000 that Plating is ruining.
View detail
Just right for a little motorcycling
I installed it in a car model called X1R of ThailandYamaha
Measure the distance to the Exhaust System and select the appropriate size
The Engine Displacement Volume is a small small motorcycle So it's no different with a bracket like this! LOL!
People are going to tell you that it's a Large type or something, but SmallEngine The Displacement VolumeMotorcycle is a good enough cosmetic
It doesn't look bad, and it didn't rust out quickly or anything, so Universal Bracket I thought it was a good idea as
I also like that you can choose the length
View detail
Cospa best
I bought it as a bracket for the external exhaust system
It is used to fix a Silencer from the so-called Mount on the upper side of the rear suspension Bracket
The Twin Shock Mini bike is usually usable for Large
Material:It is Stainless Steel, so it is rust resistant and the quality is GOOD
The round bars of the Bracket are thick and the machining accuracy of the bolt holes is perfect
Also, the welds are well blended in, so they won't break with normal use
Why is it so cheap? LOL!
Or is the other company's stuff too expensive?
You can't afford not to use this because you can get a solid, clean product at this price
I want them to continue to be manufactured forever
If there is no Offset, you will have to make a new one I think I'm more than happy to do that
View detail
Ossified Items! but certainly not hot!
I didn't care about the function or anything else, I bought it for fashion
Stainless Steel Band is Quantity:It came with 2pc, but I didn't use it and used Wiring to hold it in place
I was able to roll it up without it stinging without getting wet like it used to
The color is neither White nor Black, but a dull Brass-like color
I think it's a good idea because it's weird, even in Polished's pure white
It's a two-cylinder, so it's not enough for the Limit (it could have been if I had done it right):2pc. Set used
I don't particularly care for the performance, but it's certainly not hot
Even with the engine running, it can touch the exhaust pipe for a short time
View detail
I can satisfy my self-interest
XELVIS, where the temperature difference between the front and rear banks is a weak point (VT) It is used for the front exhaust pipe
It's long enough to double roll and the included Stainless Steel Band is a nice touch
Product Description Uneven color But it doesn't matter if you can burn it
The effect was to reduce overcooling and keep the water temperature gauge slightly higher than it was before installation
Maybe it's Brush-bo, but it's nice
View detail
Fits: HONDA MONKEY
I guess you could say it's an STD Exhaust System for Bore up
Takegawa17RStageDBoreDBore Up Kit88cc with quietness I was looking for an Exhaust System and found this product
It didn't look nearly as good as the OEM and didn't seem to be of much lower quality
Only the exhaust port is thicker, and it is judged to be an Other Brand Product that is slanted Point you can do
Included Parts:Gasket, Mounting Bolt, Nut all included and no additional parts are required
Installation was easy and easy with no distortion
When you start the engine, you'll see that it's a 250cc single cylinder OEM exhaust system and I felt that I could drive on public roads without any problems
I tried to run, but do not feel particularly badly out of the way, the noise does not become loud, and you can't worry about it I was able to run for fun without having to
Only the combination of Takegawa intake manifold and PC20 will turn the ThrowScrew The point of concern is that things are difficult
You can find a suitable tool, process the tool, or replace it with a screw that can be turned by hand, etc It's not a Large problem, because it can be solved
Cost performance is also high
View detail