Reviews
Fits: HONDA MONKEY, HONDA GORILLA
It is regrettable that Silencer has rust
There is rust but there is no problem on the performance No price is cheap so I'm wondering if this is something like this?
I was able to install without any problem for mounting ??
Where you get concerned about getting off and Torque is scrapped ??
View detail
Fits: HONDA MONKEY
Cospa best
Over Exhaust System was attached, but when commuting early in the morning in a residential area it is quite disappointing for explosive sounds (It's a nice sound, though) I go on the same road everyday at the same time.
There is no complain if this texture is around 6000 yen.
The sound is quiet enough to be surprised.
I am glad I bought it.
View detail
Fits: HONDA MONKEY
Is good.
I liked it with Over Exhaust System, but it is somewhat annoying if the commuting time early in the morning is just a residential area and it is a bomb sound every day ...
This Exhaust System was quiet and it was supposed to correspond to Engine which boosted up, so purchase.
It's really quiet.. Although it is a 88cc boost car, although it is not bad, it can run to Smooth, but it can not Appeal to the car quietly, so Small Zone MONKEY has to drive a safe defense more than before.
View detail
Fits: HONDA MONKEY3.1PS(6V), HONDA MONKEY2.6PS(6V), HONDA GORILLA3.1PS(6V), HONDA GORILLA2.6PS(6V), HONDA MONKEY(12V) Fitting frame number AB27-1000001-, HONDA MONKEY(12V) Compatible Frame No. Z50J-2000001-, HONDA GORILLA (12V) Fitting frame number AB27-1000001-, HONDA GORILLA (12V) Compatible Frame No. Z50J-2000001-
minimoto exhaust
minimoto upstyle exhaust. love it. great sound.qaulity is amazing.price is great. couldnt be happier. fitment was good other then having to trim the rubber for the muffler View detail
Pipe looks and sounds great on my bike. like the chrome and the fit is great. I would say It"s a good value for the price. Everyone should like it.
Pipe looks and sounds great on my bike. like the chrome and the fit is great. I would say It"s a good value for the price. Everyone should like it. View detail
A little over two thousand yen.
I can do it well except for 2,000 yen habit. Material : Is it Polishing or Polished?. If this is 4,500 yen Material : Aluminum and higher Material : I thought that I do not have to buy Titanium. View detail
Fits: HONDA MONKEY3.1PS(6V), HONDA MONKEY2.6PS(6V), HONDA GORILLA3.1PS(6V), HONDA GORILLA2.6PS(6V), HONDA MONKEY(12V) Fitting frame number AB27-1000001-, HONDA MONKEY(12V) Compatible Frame No. Z50J-2000001-, HONDA GORILLA (12V) Fitting frame number AB27-1000001-, HONDA GORILLA (12V) Compatible Frame No. Z50J-2000001-
Sounds good
I exchanged the Exhaust System for the first time.
Although it took a while, I made it properly.
The sound is also quite good.
Instruction Manual somewhat difficult to understand, but I guess there was not much trouble.
Idling has stabilized somehow better than NORMAL.
View detail
Fits my 1972 z50ak3 perfect. Looks good and sounds good. I cannot say if it helped my original 49cc engine with performance or not. It is nice that you can still use it when you upgrade to a bigger engine in the future like a Lifan one hundred ten cubic c
Fits my 1972 z50ak3 perfect. Looks good and sounds good. I cannot say if it helped my original 49cc engine with performance or not. It is nice that you can still use it when you upgrade to a bigger engine in the future like a Lifan one hundred ten cubic centimeter or big bore eighty eight cubic centimeter kit. For the price it is a great deal that cannot be beat. However, it only gets four stars because the inside of the pipe was welded poorly and needs to be ground or sanded. View detail
Easier to use than OEM
Used for DAX + FalconExhaust System. I was squeezing the Exhaust Bracket and the Carrier in the ShockMount part, so it was hard for Cap Nut to apply Torque. However, thanks to Bracket, we were able to tighten it carefully as we were able to conclude Carrier and Exhaust System separately.
Although I was using OEM Product before, it was inconvenient because it was inconvenient to remove it by removing the Exhaust Bracket to the outside that was large convex shape by Male Screw, but because it is separate from Bolt, I was able to work. It is also good looking.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Interferes with slightly annoying & Brake pedal
I installed it in solo of Honda.
As Custom is aimed at SteamPuncture Wind, Design is Large satisfied with Image Exactly.
However, when I tried it, I interfered with Brake pedal and I managed to install it by denting the interfering part.
I think that it is caused by the shape around Solo's unique Swingarm, so MONKEY and CUBetc. I think that you can install it without problems.
I installed it early this morning and used it for commuting, but it is still quite annoying. I had expected some shape from the shape, but I think that likes and dislikes can separate with the sound that Cocococo and Gold genus resonates.
Because I did not suit my preference, I plan to make Baffle and combine it with Gold to make it a little more mild.
However, these are not all problems of the product itself. It is very good to make for the price, but the quality of Stainless Steel is also good, it is outstanding so it is outstandingly compatible with the engine of the high rotation type Tune
I think that it is a product that I can definitely recommend it if the taste of the sound matches the type of car.
View detail
Fits: HONDA MONKEY3.1PS(6V), HONDA MONKEY2.6PS(6V), HONDA GORILLA3.1PS(6V), HONDA GORILLA2.6PS(6V), HONDA MONKEY(12V) Fitting frame number AB27-1000001-, HONDA MONKEY(12V) Compatible Frame No. Z50J-2000001-, HONDA GORILLA (12V) Fitting frame number AB27-1000001-, HONDA GORILLA (12V) Compatible Frame No. Z50J-2000001-
Wonderful muffler. The sound of the bass and a little louder than we would like. The appearance of a noble. I installed without problems. Very pleased with the purchase.
Wonderful muffler. The sound of the bass and a little louder than we would like. The appearance of a noble. I installed without problems. Very pleased with the purchase. View detail
Fits: HONDA MONKEY, HONDA GORILLA
This is terrible
First of all, Bead of the weld is as dirty as I thought it was an amateur finish.
Evacuation leak & Rust came out from the welding part.
The hole position of the attachment flange on the waist side is required for rework after the detachment Lame.
The sound is pretty good so it's too bad, but it's a few skewed cutting exhaust system, so it's an Exhaust System that you can consider re-purchasing when you think about it and Cost.
View detail
Fits: HONDA MONKEY
4 LMONKEY installed
Installed on 4 L MONKEY 88 cc KITACOSTDHeadHigh Camshaft
I used it with PC 20 carburetor, but I think that the missing is bad, it may be bathered for a Bore up car of about 75 cc.
88cc + High Camshaft + Big carburetor may be a little tough.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
It may be Recommendation other than Large Size
For MONKEY, but I installed it on the Parka 50
As it is for MONKEY, Exhaust Bracket was short and it was not useful for CUB
Sound clearly, it is noisy
Completely unraveling ○ It is a volume close to the straight pipe Sound of the family
Since it can not be helped, I bought a 44 Φ Baffle separately at Exhaust outlet and attached it
It became quiet a little, but it is still more noisy
I think that it is a fashionable Exhaust System, well built, except for Large sound of sound
View detail
CHALYExhaust System Exchange
As an entrance to CHALYCustom, I purchased this product to exchange Exhaust System. Problems occurred when trying to arrive and assemble quickly, problems occurred, incompatibility with outside Suspension was bad or attached Exhaust Bracket was unable to attach, but trial and error, as a result of detaching the Rubber inside the Silencer band and installed.
Well if this price is not it can not be helped. When I started Engine it was disappointing forecast with a lower noise, good meaning that it is not 50 cc.
View detail
Fits: HONDA MONKEY
Although omission is good, the finish is slightly miscellaneous
I can not complain so much because it is cheap, but the finishing is somewhat sloppy and Plating is also diluted.
Obviously rusting wounds (← I can not convert why) So, Body is quick
I painted Black.
I wonder if the sound quality is a bit vulgar ~. MONKEY's OEMExhaust System has the early 12V
I remembered that it was a rounder sound like Turnul ....
Compared to that it is like Bababa! There is no classy feeling.
DAX / Feeling close to CHALY's Tutinoko Exhaust System.
Well, since the caliber is Large, it can not be helped.
The volume is modest and I do not hear it so much (* It is personal impression)
The omission is as good as not compare with OEM. Ultimate as an OEM of 12V early
Just putting High Camshaft just laughed and clogged up, but Minimoto
Even with 88 cc it is completely usable. There is no feeling that the top does not stretch.
Although there is anxiety about durability and weather resistance, desolation is good with Normal look Exhaust System desires
I think that it is not a bad choice.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Awesome note - only thing I needed to change was the bolt holding the rear shockers onto the bike, and the kickstarter. The factory bolt through the shockers wasn't long enough to accomodate the new hanger, and the stock kickstarter hits the exhaust way
Awesome note - only thing I needed to change was the bolt holding the rear shockers onto the bike, and the kickstarter. The factory bolt through the shockers wasn't long enough to accomodate the new hanger, and the stock kickstarter hits the exhaust way before you manage to start the bike. But now that I've solved both of those problems the bike sounds AWESOME! Look me up on monkeybikeoz.com.au if you want to see more pics.. my handle is 'shoggothe' and I plan on buying a few more parts yet from webike! :) - Adam View detail
aesthetically it is a very nice with weld lines reaching the outlet exhaust. Easily installed in my Honda Dax st70 gives a very pretty picture. Its affordable price. Their sound gives the bike a more powerful appearance and some improvement in the relief
aesthetically it is a very nice with weld lines reaching the outlet exhaust. Easily installed in my Honda Dax st70 gives a very pretty picture. Its affordable price. Their sound gives the bike a more powerful appearance and some improvement in the relief and development 70cc engine. A good product that I recommend for any mini bike Honda. no installation problems and the steel quality is good. Good product for the Minimoto brand. View detail
This was a problematic exhaust unfortunately. I really wanted it as it looks cool in the pictures and I thought it would look better on the bike. The problem is that the size can't be judged accurately in the pictures provided. After I installed it, it t
This was a problematic exhaust unfortunately. I really wanted it as it looks cool in the pictures and I thought it would look better on the bike. The problem is that the size can't be judged accurately in the pictures provided. After I installed it, it turned out the diameter is too large and the alignment is not perfect either. This basically meant that the exhaust is too low and will scrape on right turns. So unless your bike is lifted or you want it as a show piece, I wouldn't recommend it. Otherwise the price is good and the sound is great View detail
exhaust sound is good, fit was right but i find the chrome and the welding a little crude and it sticks out to the side more than the stock pipe. There were small dents around the place when i got it. it's still great for the price though.
exhaust sound is good, fit was right but i find the chrome and the welding a little crude and it sticks out to the side more than the stock pipe. There were small dents around the place when i got it. it's still great for the price though. View detail