Reviews
Prevent burns!
[How is it used?
In an effort to increase the number of OffLoaders, we are co-owning a CRF125F as a RenBarrel vehicle.
The other day, when I borrowed it at the Race, I was unlucky enough to burn myself with the exhaust pipe when I fell, so I rolled up the Vantage.
Was the one you received as per Image?
As per Image
Was the installation difficult?
I wet it in water and rolled it up with some Overlap.
All locations except the start and end points are fixed with Wiring.
How was your experience with it?
It was my first time wrapping it and it was easier than it worked and didn't sting as much.
[Included Parts:were they on?
It contains 5 Stainless Steel Bands.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I like MINIMOTO's Large that even these parts are prepared reasonably.
View detail
Used for CD50S.
I used it on my CD50S.
It is for DAX, but I bought it because I like the shape of Up type.
Installation is not attached as it is.
I bought an L-shaped bracket from Home center and modified it to fit.
The volume and sound quality of the Exhaust System is the same as OEM Product.
I don't think there is a Large difference in driving performance either.
If you like the shape, you can buy it for less than 10,000 yen.
View detail
MONKEY Exhaust SystemExtension Bracket
If it is produced with an emphasis on appearance, it is a little disappointing.
The Hexagon Bolt comes out of the Large Exhaust Bracket.
View detail
I think it's a good product.
I used it to put the Takekawa Exhaust System on my MONKEY!
It works fine and I can recommend it.
View detail
It looks better now.
I bought this to remove my Tandem Footpeg.
Material:I don't think there is any concern about strength etc. than Aluminum.
With the GSX-R125, I think 225mm would have been a better fit, but Clearance managed to get it to fit, and it looks good now that it is slightly raised.
View detail
Fits: HONDA MONKEY
Cospa strongest
There is no other exhaust system that is this cosmetic.
MONKEY Exhaust System Up Type is the best fit for me.
There are other Exhaust System Up Types, but they don't have Heat Guard or are quite expensive.
The price is phenomenal with the Heat Guard and the quietness is a high point.
There was no screw pitch misalignment, which is common with external exhaust systems.
Large land system is getting LevelUp!
I'm going to try to make the Exhaust System about 30,000 that Plating is ruining.
View detail
I'm not complaining because it's cheap.
You should definitely work on it in water.
The prickle attacks all day long.
Also, it is hard to wind the R part because it is 50mm wide.
I still feel that about 30mm is a beautiful finish.
View detail
Fits: HONDA DAX, HONDA GORILLA, HONDA MONKEY
Cheap Gasket
MINIMOTO MinimotoExhaust System Gasket for MONKEY, DAX caught my eye, so I bought it on impulse this time
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
It's not that bad of an impression I've had of it
I don't know if I'll continue to use it in the future, but I'm glad I bought it
View detail
Just right for a little motorcycling
I installed it in a car model called X1R of ThailandYamaha
Measure the distance to the Exhaust System and select the appropriate size
The Engine Displacement Volume is a small small motorcycle So it's no different with a bracket like this! LOL!
People are going to tell you that it's a Large type or something, but SmallEngine The Displacement VolumeMotorcycle is a good enough cosmetic
It doesn't look bad, and it didn't rust out quickly or anything, so Universal Bracket I thought it was a good idea as
I also like that you can choose the length
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Cool
It's a powerful sound
However, the sound is considerably larger than OEM
I'm not sure about the performance, but I feel like I'm getting better out of it
I'm very happy with the way it looks
View detail
I put it on the SUPER CUB
It's for DAX, but I put it on my SUPER CUB
I bought this one, which is listed for 88cc - 124cc as I was planning to bore up, but In the end, I installed it with 50cc
Maybe it's because the Engine Displacement Volume was NORMAL But the volume was good as well as Smallish
It has a moderate feel to it, and it can be run on 50cc for the time being
Conversely, I think it's a bit underpowered in a vehicle that's being played around with 110cc or something crunchy
Also, the texture was beautiful for the price
Plating on Steel, so it may be tougher for those types that are left outdoors
In my case, I hung it on a Motorcycle Cover for about three months and left it in an uncovered parking lot But it didn't rust
I installed it on a SUPER CUB, not a DAX
The bracket on the back side was quite overwhelming as I managed with some things
I think it needs a little bit of work to put it on properly
As for Leg shield, it was a miraculous Clearance to avoid it
Also, the exhaust system will grow in the Right Side calf area, and But thanks to the Heat Guard, it's not hot at all
I rather enjoy LeftCorner because it allows me to do calf grips
I'm trying to find out if it's possible to attach it to MAGNA50 and other frames with UnderTube It is
View detail
Cospa best
I bought it as a bracket for the external exhaust system
It is used to fix a Silencer from the so-called Mount on the upper side of the rear suspension Bracket
The Twin Shock Mini bike is usually usable for Large
Material:It is Stainless Steel, so it is rust resistant and the quality is GOOD
The round bars of the Bracket are thick and the machining accuracy of the bolt holes is perfect
Also, the welds are well blended in, so they won't break with normal use
Why is it so cheap? LOL!
Or is the other company's stuff too expensive?
You can't afford not to use this because you can get a solid, clean product at this price
I want them to continue to be manufactured forever
If there is no Offset, you will have to make a new one I think I'm more than happy to do that
View detail
Ossified Items! but certainly not hot!
I didn't care about the function or anything else, I bought it for fashion
Stainless Steel Band is Quantity:It came with 2pc, but I didn't use it and used Wiring to hold it in place
I was able to roll it up without it stinging without getting wet like it used to
The color is neither White nor Black, but a dull Brass-like color
I think it's a good idea because it's weird, even in Polished's pure white
It's a two-cylinder, so it's not enough for the Limit (it could have been if I had done it right):2pc. Set used
I don't particularly care for the performance, but it's certainly not hot
Even with the engine running, it can touch the exhaust pipe for a short time
View detail
I can satisfy my self-interest
XELVIS, where the temperature difference between the front and rear banks is a weak point (VT) It is used for the front exhaust pipe
It's long enough to double roll and the included Stainless Steel Band is a nice touch
Product Description Uneven color But it doesn't matter if you can burn it
The effect was to reduce overcooling and keep the water temperature gauge slightly higher than it was before installation
Maybe it's Brush-bo, but it's nice
View detail
Fits: HONDA MONKEY
I guess you could say it's an STD Exhaust System for Bore up
Takegawa17RStageDBoreDBore Up Kit88cc with quietness I was looking for an Exhaust System and found this product
It didn't look nearly as good as the OEM and didn't seem to be of much lower quality
Only the exhaust port is thicker, and it is judged to be an Other Brand Product that is slanted Point you can do
Included Parts:Gasket, Mounting Bolt, Nut all included and no additional parts are required
Installation was easy and easy with no distortion
When you start the engine, you'll see that it's a 250cc single cylinder OEM exhaust system and I felt that I could drive on public roads without any problems
I tried to run, but do not feel particularly badly out of the way, the noise does not become loud, and you can't worry about it I was able to run for fun without having to
Only the combination of Takegawa intake manifold and PC20 will turn the ThrowScrew The point of concern is that things are difficult
You can find a suitable tool, process the tool, or replace it with a screw that can be turned by hand, etc It's not a Large problem, because it can be solved
Cost performance is also high
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Cospa is good
It was installed as a replacement for a Honda SOLO OEM exhaust system
50cc, carburetor is my impression of the OEM condition
We chose it for the following reasons
1) There are almost no exhaust systems for SOLO, but will MONKEY be available? I didn't know if it would work
I can't afford an expensive trial 。 At this price, even if it doesn't work, you can laugh it off
2) I thought it would be a good fit with the design of the motorcycle
(1)Side Stand interferes when raised, but can be driven
As long as you don't bank on it too much, I don't think it's a problem
2.Silencer's Bracket is not long enough at all
You need to cut a sheet of aluminum or other material to extend it
I think you can use the Bolt on the Seat rail to stop the Seat
3.Baffle is also included, so it's not too noisy, but still has a nice bass sound I am
I'm not sure about the power
It doesn't change much, especially at low rpm
At high rpm, Main jet at 65→70 is just right, and re-binding is 70km It's about
5. it's a beautiful piece of work and I think it's very cost effective considering the price
View detail
It's universal, so it's something that can be processed and used well
I bought it to try to push up the Silencer, but it's not easy to use This is for those who understand well the fact that it is Universal and can use it in their own way
The construction is good for the price
View detail
Is it a bargain?
Because MONKEY's Exhaust System has become rusty,
I bought it for hiding rust.
It has a length of 5 meters, and I think that this price is cheap with five Stainless Steel Band..
I think that it was better to have gloves, long sleeves, long Pants, Mask when installing.
Working with short sleeves, my arms are tingling and itching itching.
Since the thickness is only this thickness, it would be nice if there was a little thinner ? ? ?
I do not know about performance (Lol)
View detail
I soon got rusty.
I bought it because I lost one OEM Product.
I do not grasp exactly, but rust quickly.
Even if it rusted it can be used without problems, well, I feel like this.
View detail
It looks good, it is super cheap.
I looked for HONDACHALY 50 's Custom purpose 30 years ago, because it was affordable, I purchased without hesitation.
OEMExhaust Easy System (About 10 minutes) Although it got off, attaching the fixing Band (3 or 4 times over) I had a hard time. (About 30 minutes)
However, I really got hit by Brake pedal and I gave it up.
After that, Stopper rubber for STAND (OEMExhaust system included) There is no,
Chain is in contact and rubbing, but it does not seem to be a problem as it is.
View detail