Reviews
’Type 74 MONKEY
Personally, I dislike Minimoto products. But this parts is very similar to the ones I had back then, no complaints! I will report any changes after that. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
7624
A friend of mine bought such a footrest and I also wanted to put it on my Honda Monkey. I liked this footrest in appearance, workmanship and material. I think that with the optimal height of the footrest, adjusting the height of the lift is superfluous (but this is relevant for the stock height). There were no problems with the installation, the only thing that my model has an engine lock, but the manufacturer took care of it (the Product # 5550 decoy is purchased separately). View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
5550
I purchased a footrest (Product # 7624) for my Honda Monkey, but my model has an engine lock when driving with the footrest not removed. To bypass this blocking, I needed a decoy. I am very pleased that the manufacturer took care of this problem!!! I had to work hard with the installation (this is due to the difficulties of getting to the connector), but everything was successful. As a result, it works great! I am very satisfied!!! View detail
It was very good!
The price is low, but the quality is very high and I had no problems at all with the installation.
I am considering purchasing another bottle in Stock!
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Minimoto MONKEY Handlebar Clamp
I purchased this product because I replaced the 6V OEMMONKEYFront fork with a 6V GORILLA, and I wanted to install the HURRICANE Mini condor that was attached to the GORILLA, but I knew that the for MONKEY Top Bridge cannot be attached to the GORILLA's Handlebar Clamp, so I purchased this product. I decided to purchase this product because the position and diameter of the mounting holes of the Top Bridge are different between MONKEY and GORILLA, and the price is reasonable. When I installed the Handlebar Clamp, the position of the Handlebar was about 10mm forward, so I can use it without any problem. View detail
MINIMOTO Regulator from 6V MONKEY Silicon Rectifier
I installed it on my 6V GORILLA, I bought it to customize it with 6V, the voltage is very stable and the battery life is longer. I will continue to ride on the Large Cutter while maintaining it. It has been my partner for more than 40 years. View detail
MINIMOTO 6V MONKEY6V MONKEY/GORILLA Main Harness
I purchased the 6V MONKEY/GORILLA Main Harness for MONKEY/GORILLA last time and this time I purchased this one because it comes with Silicon Rectifier Fire and the price is reasonable. I purchased this product because I can do the wiring without any problem. 6V OEM product is discontinued, so I am very thankful for this product. View detail
Fits: HONDA SUPER CUB 50, HONDA CHALY 70, HONDA CHALY 70, HONDA CHALY 50, HONDA CHALY 50, HONDA CHALY 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA CHALY 70
Used for CUB
[How is it used?
CUB's fuel tank cap was destroyed, so this is used
Was the one you received as per Image?
It was as per Image and there were no problems.
Was the installation difficult?
Installation accuracy is good, and it can be used with the same degree of force as the OEM.
It's a pontoon.
How was your experience with it?
Since it is thinner than the OEMTank cap, Fittingetc. can be installed without worrying about anything.
However, as is the case with OEM, there is a part where it feels a little difficult to turn a slightly thinner cap than OEM in order to turn a slightly more reluctant tank cap.
[Was there anything that disappointed you?
Not particularly
I think this is cosier than looking for a used one with Key cylinder.
View detail
MINIMOTO6VMONKEY Silicon Rectifier Fire to Regulator
I have two 6V GORILLAs, so I installed the first one and the voltage became very stable and the battery life improved dramatically, so I installed the second one as well. I did not want to change to 12V, so I bought it to keep driving with 6V. View detail
For ChainSelfMaintenance
I had been doing maintenance of the chain by myself, but I was not satisfied with the results, so I decided to purchase the equipment.
Both parallel and perpendicular can be checked.
Analogous method, but therefore reliable.
I think it is a good item to have, and I recommend it to those who do maintenance of looseness and deflection of a chain by themselves.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Required for Carburetor setting
Packing is essential for carburetor setting, etc., which requires multiple carburetor body roses.
Quantities, since rubber packing usually dies when opened and closed before aging.:It might be nice to have at least 2 Sets.
View detail
Among the many that are out there.
I chose this product to get Chain Alignment since I changed the Chain of MONKEY125 to Seal chain.
The reason why we chose this type is that there are many types of this type from various manufacturers, but the Screw that fixes the Sprocket to the Material:Plastic, and that was the criterion for our choice.
It is not a good idea to get scratches, no matter how hard it is to see them.
I got a 40cm Aluminum rod separately because the Aluminum rod was too short according to the reviews from other seniors.
I think it is cost-effective if it is mentally satisfying, although I think it can only provide a comforting adjustment.
View detail
Pimping to 12V square eye CHALY.
Fit is perfect.
Small is not wired.
The fact that it is made of glass is also an added bonus.
Chinese LEDs are installed on these to ensure brightness.
We had a good shopping experience.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
The footrest for Monkey
I bought a footrest for a Honda Monkey, I really liked it because it is made of aluminum and is not adjustable - the length of 19 cm is what you need. It came up without any problems, the installation is fast and easy. The price and quality are minimal. I recommend it to everyone. I bought a footrest for the Honda Monkey, I really liked it because it is made of aluminum and is not adjustable - the length of 19 cm is just right. Fits without problems, installation is quick and easy. Minimum price and quality are high. I recommend to all. View detail
Fits: HONDA APE TypeD, HONDA APE 100 TypeD
Satisfaction can be obtained in both appearance and performance.
Aluminum case and bright red Spring color increase the impact of the look and feel. (^^;)
Spring rate seems to be more flexible than OEM when you drive it, and
I felt that the Dumping was firmly in place and the Rear was more stable.
I personally appreciate the fact that the total length can be adjusted with the pre-road fixed, but the Hook wrench
It is not included, so those who wish to adjust it must purchase it separately.
View detail
Rusted and replaced
I purchased the same product a long time ago, but it rusted due to neglect, so I purchased the same one from here this time. Rust in the tank is unavoidable, but the exterior is clean and the quality of the product is good enough. View detail
You will be able to try various CDIs.
By using this conversion coupler, you can use 5-pin CDI such as for CUB. You can also try CDIs made by Large Land, which are sold at low prices at certain auction sites, and you may be able to find an unexpected CDI that suits your engine. However, please use non-recommended CDI at your own risk. View detail
Perfect for loading up the Monkey
About quality and texture, I can confirm that the quality is good and that the material used is steel tubing and finished with a black painted coating with a design that suits the styling of the Monkey. About the feeling of use, This rear carrier has a large 5kg carrying capacity which makes it perfect for loading up the Monkey for a weekend away . Products to buy together, To get the most use out of the rear carrier if styling is not your solo purpose it would be ideal to add a small tail bag to your cart so the option to carry a small load is always available to you. Difficulty of installation, I can say the fitment of the rear carrier was very easy due to the simple nature of the install and relatively easy access to the four mounting points to secure the carrier with the included hardware and some original hardware. Cost performance and comparison with other products, The pricing of the product is great. You receive a rear carrier with a large carrying capacity for its size, the best for a rear carrier in this price range. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Good
I thought overseas shipping would take longer than expected, but it was delivered quickly.
I drove it for a few months after installing the muffler and there was no problem with the product.
The exhaust sound is nice. However, the finish of the muffler paint is
There are some parts that are a bit disappointing, but other than that I am satisfied with everything.
When purchasing a muffler, the outlet angle needs some processing ---------------------------------------- ------------------ I thought it would take longer than I thought overseas delivery, but it was delivered quickly I've been driving for a few months after mounting a muffler It's good . However, the finish of the muffler painting There's a little unfortunate part. I'm satisfied with it. When purchasing a muffler, you need some processing angle angle. Powered by Google Translator
View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA CHALY 70, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Product # 3181
I need to have the clutch serviced on my Monkey. Once the right side of the engine is opened, the gasket will need to be replaced. This is my first time purchasing this product, I hope everything goes well. First, I can note that I liked the workmanship and material, and also liked the packaging of this product. View detail