Reviews
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
having good taste
Parenthesis well, very quiet with Baffle
Mounted on a GORILLA 985
I was told that the Normal kick pedal could be used, but it interfered with the pedal and could not be used.
View detail
DAXAir cleaner
Good cosmetics,
Mounting Bracket Location OEM and
Spacers are not required because of the difference.
View detail
Getting the Center out is the hard part.
I was prepared for BALI and Small scratches, but I can't get the Center without modifying the Brake Panel side.
I also bought a 4mm Sprocket spacer but I think it will be useless.
Also, there is some distortion, so if you want to assemble it tightly, we recommend a reasonable price.
View detail
Well, it is about the same price.
It needs a little processing, but I think it's a good cosmetic product. View detail
Fits: HONDA MONKEY, HONDA MONKEY
The direction of removal is ….
[How is it used?
SpiDer125 OEMCook is broken and is on Replace
Since it is not easy to find a cook for M12 female thread installation….
Was the one you received as per Image?
main idea
Was the installation difficult?
There is nothing difficult about it, but you need to be careful around fuel.
How was your experience with it?
Phi;8 is Overspecified for SpiDer125
[Included Parts:were they on?
Hose and Clip with I.D.Φ8, StrainerNet was included, which could not be installed as it is because the diameter of the end does not match!
[Was there anything that disappointed you?
The panelParts on the front of the Cook are not Screws but Rivet?
The SpiDerOEM is right, whereas the SpiDerOEM is left, so the Fuel Hose is a little more difficult to handle.
When the transparent hose is turned around at a steep angle, it breaks, so I use a hose with an inner diameter of Φ8 and an outer diameter of Φ8 with an inner diameter of Φ5.
View detail
Fits: HONDA MONKEY
3-pole coupler connector
Quality and texture information is no different from the std product It is compatible with Honda Std products for its usability You should have a wire stripper to buy together It's easy to install Buy based on cost performance and comparative brand preference with other products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice on purchase If you connect the cable incorrectly, it is difficult to reunite There should be no failure from the beginning View detail
Power Supply Branch
I wanted a 110 2-pole terminal for charging and connection.:I wondered if it was a good idea since it is a Set, but substitutions with other inexpensive items would have sufficed. View detail
I guess it's okay…
Stud bolt pulls out….
Not recommended for high Engine Displacement Volume!
View detail
Fits: HONDA Shirley 50., HONDA Shirley 50.
Custom base
Seat without the OEM-style anko (bean paste), but
The difference in uncoating is hardly noticeable in comparison.
But I knew that from the pictures and bought it with the intention of modifying it.
The OEM has a document compartment on the back side of the product.
This item was made into a thin Flat seat in processed Base.
The quality is neither acceptable nor unacceptable,
The braid and epidermis are easily degraded.
I was able to restore it without any discomfort.
I am glad I purchased this one.
Of course, if you use the product as is, I think it has excellent cost performance.
And, the anchor is a little hard there.
Don't look for HCaphka like OEMs.
View detail
Terminals Waterproof and for insulation
Used for the crimping part of the Brake terminal.
Mainly for waterproofing purposes. To be honest, I thought two Shrinks would be enough, but I was attracted to the fact that there are various types of Covers and that they come with a Case. I will keep it for a while because I can use it in case of emergency.
View detail
ThrowSetting is difficult with 85cc.
I installed it for Replace because the overflow of the PB16carburetor in CUB90 was just not improving.
The pitch on the manifold side is the same and the carburetor will be attached as is, but the air cleaner side is 1.5mm shorter in diameter and the carburetor length is also shorter, so it is necessary to take some measures such as wrapping something around the carburetor.
Also, since the cook will be lost, it is necessary to add a 2-way cook with Reserve.
Since the Outer cable of the Accelerator Wire strongly interferes with the Main frame of the CUB, it is better to take some measures such as pivoting it slightly.
The thing itself is very good and accurately made.
The difficulty is that it is hard to set the SmallEngine Displacement Volume. 85cc CUB90 does not idol properly.
First of all, the notch at the bottom of the throttle valve is too large for the engine displacement volume, and the idle speed does not drop to about 2000 rpm. Setting does not come out this time.
It seems that the design of the Throw path itself does not match the Engine Displacement Volume, not because the bottom of the Valve has been cut off.
Idol is light on Brown, while 1/8th open is dark on Brown. This is a strange Setting, so it seems tough to replace the SJ that takes care of this whole range.
I have no choice but to give him the fuel mixture to match Idol, and it is like meditating on a thick 1/8 opening.
The 1/8 opening range used relatively frequently in city driving is thicker, so city driving fuel economy deteriorates slightly.
This is only when using 85cc, and once you get to 108cc, it becomes almost a non-issue.
The city driving fuel consumption is not too bad. This was confirmed by replacing the 85cc and 108cc Engines twice.
I think 125cc would be no problem at all.
From my research, it seems that it is not limited to Minimoto products, but PC20 itself is generally like that.
Therefore, we recommend using 108cc or more whenever possible.
Again, the product itself is good, no trouble after more than a year of heavy use.
View detail
Fits: HONDA CUB PRESS , HONDA DREAM50, HONDA MONKEY, HONDA NS50F, HONDA APE50, HONDA CUB LITTLE CUB , HONDA GYRO UP, HONDA GYRO X, HONDA MAGNA50, HONDA APE100, HONDA CHALY, HONDA GORILLA
Different from the picture shown
The headlight bulb seemed to have run out, and when I decided to purchase the original installation, it was unexpectedly discontinued.
The shape of the item seems to be different from what I received and the picture shown on the website.
It's not that expensive, so as long as it lights up, it's not a problem.
View detail
Size matched Connector is a Honda car (GORILLA) does not seem to fit the
Size matched.
Connector is a Honda vehicle (GORILLA) does not seem to fit the
View detail
Fits: HONDA GORILLA, HONDA MONKEY
I bought it anyway.
I bought it anyway because everyone seems to have bought it to install the Watani. I was right to buy it because the Bracket that came with the Watani had no place to install it. View detail
just support, not strap like shown in ALL of them pictures, a bit misleading since there isnt any picture of just the plate
its just the support plate, not the bracket like shown in ALL of them pictures, a bit misleading since there isnt any picture of just the plate. though it looks good qality its not what I need. View detail
So so
I bought it for the looks!
Shoes scuffed and ragged…
Material:I regret that I should have gone with Rubber.
View detail
It fits in 4LMONKEY's Headlight.
This is the only 120km/hMeter that fits in 4LMONKEY's Headlight at this time, so I bought it anyway and tried to fit it in.
The accuracy of the meter is a bit questionable, but it is better than the OEM meter that only displays up to 55 km/h.
View detail
Relay for WideWatt
Blinker easily replaced as a dress-up
When you pursue the best visual by changing the light bulbs, LEDs, and so on, you inevitably need to buy the right Blinker relay at the right time, but this product is WideWatt compatible, so you can mix and match LED bulbs and LEDs as well.
If you are concerned about the Type, which makes a ka-chica-chi sound, buy a different product.
View detail
Bought the same one as last time
It is installed on an '88 GORILLA.
If I do a normal Shift change with Pedal, my shoes are ruined and I change to Seesaw because it is a basic hassle.
I bought the same one as last time, but the Bolt that came with it didn't fit until the end …. I used an electric drill as a last resort, but it didn't go in …. I tried to turn it by force, but it wouldn't go in.
We had no choice but to substitute the Bolt that was included in the previous version.
I used an electric drill to get halfway in and was able to tighten the bolt safely, although it took some force to get it halfway out. The Bolt hole itself was a little narrow and messy.
I would like to see a little more sharpening and Bolt to try to get in.
Well, it's not that expensive, so I can give up, but it was disappointing.
The product can be used without any problem, so I think it can be recommended to those who can improve this point by themselves.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Gasoline Hose
About quality and texture be well-organized Hose and clip About the feeling of use Takegawa High Flow Fuel Cock does not fit well with standard products, but the hose did not feel durable Products to buy together hose clip Difficulty of installation easy , simple Cost performance and comparison with other products It feels similar compared to other hoses. It's not much different, but it's cost-effective About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I tried to change the hose line because the oil tank was old and foreign substances came out, but the internal diameter of the SPTAKEGAWA High Flow Fuel Cock did not fit, so I will leave it as a spare and use it to replace the vaporizer hose View detail