Reviews
Can be installed on MT-10 2022MODEL
It is not in the fit, but I bought it because the Frame, etc. should be the same.
Left SideBolt in NORMAL : M12x40 P1.25 Flange cap bolt, installed without collar.
NORMAL Right SideBolt : M12x42 P1.25 Put three color points on it and get it out. 15.
Balter's attached Left SideBolt : M12x100 Protector, collar on and out. 40
Balter's attached Right SideBolt:M12x80 as well. 20
Therefore, the effective length of Bolt is 5mm longer than Baltar's, and since it does not butt up against it, there is no problem, so we installed it.
Installation is by tightening Torque 70 Nm. It is recommended to use a torque wrench since it is an important part.
Also, the NORMAL bolt is quite hard to remove, so it is better to prepare a long Spinner Handlebar or the like.
View detail
Quick change style
I chose it because it looked cool, like the Slider cone on Racer's Quick change.
It was replaced with an external Axle, so it was lubricated and adjusted by wrapping a Rubber plate around it.
The texture was not good for the price.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZZR1400 (ZX-14)
No fit feeling
It was a compatible model, but it was too loose to stop, so we wrapped a rubber plate around it and adjusted it.
Split Pin cannot be installed because it is inserted in a hollow Axle.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
It doesn't fit even if it fits.
Purchased because the shape was similar to WSBK.
The weight was approximately 150 g.
Type through the axis is Quantity:Pair (for Left and Right) It is difficult to remove it from the "QUANTITY".:Pair (for Left and Right) Easy to work with because it is independent.
However, as expected of Made in Italy, the nut side is loose even when tightened to the max.
I dealt with it by wrapping a roll of self-adhesive Tape, but it stuck when I removed it and looked Large strange.
Also, after I bought it, I realized that I can't make a split pin because it is not a type that is co-tightened to a nut.
The cup is a cup type, but it is not co-tightened, so it looks like it is on top of the shaft, and it looks unattractive without a sense of unity.
View detail
External Axle not available
Purchased because the shape was similar to WSBK.
The weight was approximately 150 g.
Type through the axis is Quantity:Pair (for Left and Right) It is difficult to remove it from the "QUANTITY".:Pair (for Left and Right) Easy to work with because it is independent.
I had changed the Axle to 0 pointsShaft, so it was too slippery to install as it was.
I dealt with it by wrapping a roll of self-adhesive Tape, but it stuck when I removed it and looked Large strange.
View detail
Fits: HONDA CBR1000RR, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, KAWASAKI ZX-10R, KAWASAKI ZX-6R, TRIUMPH DAYTONA 675 R, TRIUMPH DAYTONA675, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE R, HONDA CBR600RR, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR400, SUZUKI GSR750, SUZUKI GLADIUS650650, SUZUKI GLADIUS650400, DUCATI 749, DUCATI 999, SUZUKI GSR600
GSXR1000 K3
I haven't used it as a Hook, but I was able to install it on my K3.The Parts themselves look very nice and I bought a color that doesn't stand out that much, but it's nice as a One point. View detail
It was purchased for dress-up purposes.
There is no maintenance stand and I have never used it.
I've taken the feeling of use to 3, because I can't judge ….
I bought it because I don't like that there is no screw hole on the Swing Arm.
Installation is very easy, just screw it up.
Parenthesis has become a little better than just a hole in the ground, hasn't it?
View detail
A bit sorry
I used this product at the different Motorcycle with the Slider of the Balter Moto this time, so I chose this product this time, but it is a dull feeling Gold, the texture is not good, Large is also subtly small Smuck. It was a little disappointing. View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R, KAWASAKI ZX-6R
I purchased this product to improve the appearance and to reduce a shock of emergencies.The actual color is a little deeper than it looks in the photo. I expected a bit brighter blue, yet it is still good. The product isn't such a part as insists
I purchased this product to improve the appearance and to reduce a shock of emergencies.
The actual color is a little deeper than it looks in the photo. I expected a bit brighter blue, yet it is still good. The product isn't such a part as insists too much, I think.
I personally prefer aluminum texture to Duracon's.
This is not a type to fix the two parts with a bolt which penetrates through the center of a wheel and is tightened by the both sides. The product is locked by inserting a part like a tapered aluminum washer, which expands as being tightened and stretches to a level to be stabilized. I hope my explanation could reach you ...
The weight is light.
I was told that it would take more than one month to deliver the product, but it delivered in a few days. They might have had some stocks.
I am satisfied with the part itself; I should be fully careful not to be helped by this product.
View detail