Reviews
Fits: YAMAHA Tracer 9, YAMAHA Tracer 9 GT, YAMAHA XSR900
XSR900 2022- Requires considerable modification for use
I bought it because it is compatible with XSR900 2022-.
The position of the mounting holes, etc., are considerably off.
RearThailandia is about to be contacted while driving.
So I gave up using it.
View detail
Fits: MV AGUSTA TURISMO VELOCE, MV AGUSTA SUPER VELOCE 800 SERIE ORO, MV AGUSTA SUPER VELOCE 800, MV AGUSTA RUSH 1000, MV AGUSTA F3 RR, MV AGUSTA DRAGSTER 800, MV AGUSTA BRUTALE 800, MV AGUSTA BRUTALE 1000RS, MV AGUSTA BRUTALE 1000 SERIE ORO, MV AGUSTA BRUTALE 1000RR
Unfortunately, I can't Recommendation.
I put it on a BRUTALE 800RR MY22 MODEL.
When I first put Antiglare on and did a test run, I peeled it off because in strong evening sun conditions, I could not recognize any areas such as the Blinker display at all.
I peeled off the Antiglare and tried to use the Super clear, but there was a white discoloration in the center, as if it had been bent somewhere. I can't blame the Super clear because I may have stored it in a bad way, but I was disappointed that I paid 2500 yen for it and this was the result.
View detail
Fits: ROYAL ENFIELD Himalayan, ROYAL ENFIELD Scram 411
This is a dangerous PARTS and you should definitely not do it.
This is a fairly appropriate spec. that uses a single tie band to secure it to the swing arm. To detach the Swing Arm, it is necessary to remove the Rear Tire, insert the Swing Arm between the Rear Tire and the Swing Arm, and tighten it with a single Tie Band.
I was concerned immediately after installation, but after touring I realized that it was even more dangerous.
(1) First of all, the Fender tilts about one centimeter toward the Tire side due to driving wind pressure. (2) The clearance between the Fender and the Tire becomes narrower, and in the worst case, the Fender is rolled into the Tire, resulting in a large risk of breakage.
No matter how tight you tighten it, it is only a tie band. It cannot be fixed tightly.
I was not convinced that it was worth the price.
Once I installed it and damaged it, I couldn't return it and lost a huge amount of money.
I would never recommend this product.
View detail
Fits: SUZUKI Hayabusa
During degreasing
I wiped it with the included cloth to degrease it and it had minor scratches.
I shouldn't have put it on.
If you touch the top surface of the adhesive village, fingerprints will appear.
View detail
Fits: YAMAHA MT-09SP, YAMAHA MT-09
I don't want you to sell this stuff.
The Antiglare is still usable, but the UltraClear has a strange cut, and the Right Side is clearly cut with a gap. I have no choice but to use Antiglare.
I wonder when they will be able to make a decent product. 4000 years of history is nothing.
View detail
Fits: TRIUMPH Thruxton, TRIUMPH Street Cup, TRIUMPH Speed Twin 1200, TRIUMPH BONNEVILLE T100, TRIUMPH BONNEVILLE T120
Not compatible with curved surface Meters.
I would like to leave it here with some unnecessary information to make it useful for all BonnevilleUser.
I bought my T120 in 2021, but the fitment was '16 and up.
This product is imported by Peitzmeier, so it seems to be the same product as described there.
Now, the Film is listed as only 2 copies, but the one I received was Quantity:1 Set of 4pcs.。
already ? is.
At that time I still consider myself fit.
Read the Instruction Manual carefully and try it with excitement and caution, and you'll never have to worry about small scratches on your Meter again!
Come on, let's clean the Meter.
Wipe it off with the included WetSeat. So far, so good. A little watery. Okay, now for the CROSS.
"…wipe……?"
No, no way. It can't be. Even though I wiped the front and back clean using a different method?
I wipe it slowly and gently with Paper which I had prepared separately. Then, certainly, Wound was attached there. It is a new Wound. It is shiny.
A moment later, a tremendous amount of regret strikes. As usual, I should have sprayed Cream and cleaned it. Even though I've cleaned up to here.
I bought this product to avoid getting Wound and this is what I got. It's half my fault, though.
The misfortune is continuous, and this Panel is not attached to Meter.
It is stated that it is better to wait for a while, but the shape clearly does not fit in the first place. There is no way it will stick forever. In order not to cause misunderstanding, of course, the process as described in the Instruction Manual is followed.
I think that it is strange in a stone, and when I look at the Review of the same product in Amazon in a hurry, User of foreign countries It doesn't stick. I'm telling you. It's too late. Everything is too late.
In other words, I paid two thousand dollars for Garbage.
I'm drooling in front of a Meter with a Wound, a leftover Meter panel, and a bunch of obnoxious CROSSes.
suddenly seeing "CHINA It says.
Again, I was deeply disappointed, but also strangely frustrated by how satisfying it was.
In addition, I found a dent in the Silencer that I hadn't noticed the last time I was standing on it.
My heart will not be healed by a little bit of board gold.
View detail
Fits: Others
Doesn't work for tiger800.
It doesn't work for TIGER.
The Silver ring on the connection part is obtrusive and interferes.
View detail
Fits: DUCATI Panigale 959, DUCATI Panigale 899, DUCATI Panigale 1299, DUCATI Panigale 1199
meaningless
No Anti-Reflection, Ultra [Color] Clear can be used to prevent scratches, but Anti [Color] Clear only fogs Meter and is not anti-reflective. View detail
Fits: SUZUKI Katana, SUZUKI GSX-S1000FA, SUZUKI GSX-S1000, SUZUKI GSX-S1000GT
The back is appropriate...
Screw hole applicable, with mounting
Bumpy back side.
It's hard, trying to keep it clean, you know?
Well, is this what motorcycle parts are like?
Out of all the Motorcycle FRP Parts I bought, the only one that was not modified was the Tank Cover for the New Model KATANA by Ohno Speed... (And the back side was clean too!)
Do you guys install them without worrying about it?
You're leaving it up to the Shop, and you don't even know it...?
View detail
Fits: HONDA CBR250RR
Size is Large
It is similar to the Film on your phone and is Cut specifically for your car model.
The Instruction Manual says that the film is cut small, but no matter what position I put it in, it doesn't fit properly.
You have to Cut the edge by yourself.
Cost performance is poor.
View detail
impossible to install
The shape did not fit and could not be processed, so it was Garbage. View detail
Fits: HONDA 400X, HONDA CB500X, HONDA CB400F, HONDA CB500F, HONDA CBR400R, HONDA CBR500R
I think I missed something.
Cannot be installed as it hits the tire
Because it's a 20 year MODEL?
View detail
Fits: DUCATI Scrambler 400 Sixty2, DUCATI Scrambler 800, DUCATI Scrambler 800 Cafe Racer
I can't install it, so I give it a rating of 0.
When I received the product, I looked at the Handling Instruction Manual and tried to install it, but I couldn't figure out where to install it.
I took it to an installation shop to see if they could install it, but they still said they didn't even know where to install it.
Returns.
View detail
Fits: HONDA SUPER CUB C125
I can't find a good place for it.
Did you really try installing it on a C125SUPER CUB before you sold it?
Because the meter panel itself is curved surface, it is not possible to paste it because of the wrinkle. It's not easy to put it on while stretching the material. [Color] And it's not Clear.
It comes with two sheets, but both were wasted.
It would have been cheaper and cleaner to have a local sign shop cut a clear film according to the dimensions.
The good part? I'd venture to say that the quality of the CROSS of the working tool is about as good as it gets.
Well, I learned a lot.
View detail
I can not use it at all
It cannot be fixed to Side Stand and is completely unusable.
Even if you squeeze as hard as you can with Hexagonal Wrench, you can still pay the STAND with your foot.
It spins you around.
This is a 0-point item. I threw away your Gold.
View detail
Fits: KAWASAKI Versys-X 250, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Ninja 650, KAWASAKI Ninja1000
I'm not buying anymore.
I bought it because I thought it would be like a Seat to put on my phone.
But the original is just a transparent tape in the shape of a meter, so it doesn't release any air bubbles.
View detail
Fits: HONDA CB500X, HONDA CBR400R, HONDA CBR500R, HONDA CB500F, HONDA 400X, HONDA CB400F, HONDA CB750 Hornet
You can't fix it with a single tie band.
The package contains only one Body and Tie Band.
It was impossible to secure it with one Tie Band.
I installed it with Dealer before delivery, but it was not secure and unstable.
I asked the shop mechanic to look at it to confirm, but he said it was dangerous and took it off.
This is not a product that is worth $20,000.
View detail
Fits: KAWASAKI Ninja 1000 SX, KAWASAKI Ninja 650, KAWASAKI Ninja 7 HYBRID, KAWASAKI Ninja e-1, KAWASAKI Versys 650, KAWASAKI Z H2, KAWASAKI Z e-1, KAWASAKI Z650, KAWASAKI Z900, KAWASAKI ZX-10R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR, KAWASAKI ZX-6R, KAWASAKI Z500 SE, KAWASAKI Z400 SE
I bought it because it wasn't here but...
I bought it twice.. The reason is that the tape ran out when I put it on, so I bought it again Don't I bought it twice. The reason was, but the tape was pulled out, so I bought it again. Paga is so good. All two of them... I don't think it's too durable. I ordered it again, but if you are in a hurry, don't buy it. translated by Google Translator View detail
It doesn't fit at all
It is clearly stated as CB650R compatible, but the width, radius, the joint with the Normal fender, and It all doesn't fit at all
It's not useful
By the way, the colors and textures of the fenders are quite different from those of the normal fenders Large size The double-sided tape that was being compatriated is not a band but a round type of irregular shape It's all so useless
It's like a hundred different products
View detail
Fits: KAWASAKI Versys-X 250, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Ninja 650, KAWASAKI Ninja1000
This is the only film available for the New Model Ninja at the moment, though …
If you've ever put a screen protection Seat on your phone, you'll know that the general Film and I felt that the Material itself was not as good as it could be in the first place
The fact that it is molded to fit the meter panel of the car model and Quantity:Even if you take into account the fact that it's 1 Set of 2pcs hellip; I can't help but think
Although the subject of comparison is for smartphones, the domestic protective film can get air bubbles if it is carefully applied If it's too big or goes in, you can push it out and it will look Beautiful
But this is pretty bubbly, no matter how much you try to put it on Beauty, and look at the pictures As you can see, if we follow the instructions in the construction manual, we can push out the air bubbles The film will deteriorate and leave a mark
Whatever it is, it provides protection and visibility [Color] I think it's a little better now that it's become Clear, so I'll just leave it up for now It's a Level of "I'm not sure
If you don't want to put anything up for protection, unless you want to put it up for protection, Recommenderation I can't
View detail