Reviews
Fits: YAMAHA MT-09SP, YAMAHA MT-09
usually
Installation was quite a challenge.
If you can stick it on, you might not have a problem, but if you're a finicky person, you'll have to re-stretch it a few times.
View detail
Fits: YAMAHA Tenere 700
Isn't that enough for now?
This is an imported product, but it seems to be the only one that is compatible with the TENERE 700.
Translation (with instructions to enter here).
It is easier to position the panel because it is made smaller than the Panel.
Blue Dust Seat is hard to remove from the backing plate.
It comes in a two-pack of Super clear with Luster and Antiglare with reflective reduction, but I wish they would give me a choice between them and lower the price.
View detail
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
To prevent scratches
The latest motorcycle meter is a Large Display, which is very sensitive to damage. It's easy.
I bought it with the purchase of a Motorcycle.
I think it's a bargain because it comes in two types:anti-reflective and glossy.
It's made by Peitzmeier:https://speedo-angels.com/Made of.
The speedo-angels website explains how to paste it, so it's easy to understand.
View detail
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
I failed
[Color] Total Quantity of ClearFilm and AntiCREAFilm:1 Set of 2pc
Garbage got into both sheets, an air bubble was made, and it failed It is sure to work on a rainy day when it is difficult to spread dust
I wanted to include a few pieces for failure because the price is so high I discarded the ones that had bubbles because I'm a curious personality, so I discarded the ones that had bubbles
View detail
Fits: KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS SE
Functionally, OK
The product looks cheaper than the price lol
But it's Mudguard, so if it works, it's good
In the instructions, you are advised to use PlasticRivet
I had some resistance to make a hole in it, so I used only double-sided tape for the time being
However, since the attached Double-sided Tape did not have a good track record, I decided to use the super-strength 3M tape that I often use I used it
The Level of the Gap seems to have been attached to a few things, but I don't know if it's true..
Or rather, it's too firmly attached and it won't come off even if you try to remove it currently
The construction might be better done by two people
View detail
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
very cool
It also came with a cloth to wipe the screen, which was helpful It was a good enough product without making it hard to see at all The way it is attached depends on my ability to get it off or not, so I can't say for sure It has a few gaps and bubbles in it, but you can fix them if you want View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Recommendation is applied upon delivery
I put it on the New ModelKATANA a little while after delivery
I bought it to ensure visibility of the electronic meter by sunlight
This is a vehicle type Exclusive Design and Just fit
[Was there anything that disappointed you?
Antiglare looks a bit fuzzier than the Manufacturer's image
Do you have any wishes or improvements you would like to make for the Manufacturer?
It's going to be difficult, but we're almost there [Color] Clear Antiglare is good
[Do you have any products to compare it to?
None
What made you decide to buy?
I always have Film on my phone as well, so …
I didn't care for it in the past because it wasn't an electronic meter, but it's a necessity for a full electronic meter Goods
How was your experience with it?
Antiglare
I felt uncomfortable right after it was applied, but it didn't bother me after a day of riding
Was the installation difficult?
It's easier than you think because it comes with the Mounting Kit needed to apply it
【Please tell me the installation point and hang】
If you buy a sprayer and spray the meter with water and then install it, there is no dust, etc It's a lot of fun
Moisture can be removed using the included air-removal card, and even if there is some left over, it will be removed over time I'm out
[Was the Instruction Manual easy to understand?
An Instruction Manual with detailed instructions on how to apply it is included and helpful
[Included Parts:were they on?
The Mounting Kit is gorgeous
[Others]
Super clear, Antiglare and Mounting Kit are included at this price! So it's a bargain
View detail
Fits: HONDA CBR1000RR Fireblade, HONDA VFR800F, HONDA VFR800X Crossrunner
Surprisingly Exactly
Installed in VFR800F
Fitting is surprisingly good (to the point where you might think it's a specialized product)
Bottom line is, the bounce is down 40%. I'd say that's about it
However, the installation was very Large strange to remove and install the Fender
View detail
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
Quality and manufacturer's products, good handling
Shipping arrival packaging was good After arrival, I applied it to the meter panel immediately, but there are no included parts and instruction manual The work was carefully explained to me and the work was perfect I love the finished product View detail
Fits: DUCATI Multistrada 950, DUCATI Multistrada Enduro, DUCATI Multistrada 1260
Worth buying
I installed it on my Murci 1200 Enduro
The appearance after installation was completely comfortable and reduced the mud splash to the Radiator Personally, I can install this product first, before the Radiator core guard We recommend that you do this
However, Murci's Normal fender is extremely short, so even with this product on, it's barely a GS It's about the same level as the Normal fender of the same fender, so please extend it a few more inches I think it was a good idea
Installation is done with the attached Double-sided Tape and 4 plastic screws to prevent them from falling off But because double-sided tape alone is unreliable, plastic Screw should be added I think it's good
When installing the plastic screw, you need to drill a hole in the Normal fender If you are too cautious and make the hole drilling small, it is hard to get the plastic screw in The head of the screw may break off during the process of hammering, so you should open the bottom hole firmly is good (To the extent that you can swoop in on the Screw.)
View detail
Fits: YAMAHA XSR900, YAMAHA XSR900, YAMAHA XSR700, YAMAHA XSR700
It looks promising for the purpose of LCD protection
It was a bit of a lumpy smartphone film in terms of product texture
[Color] There are two types of products included in the kit, Clear and Antiglare, and you can choose the one you want to install That's nice!
The instruction manual is easy to understand, and the installation is not a problem for people who are used to using smartphones, etc The product itself is smaller than the size of meter However, the product itself is smaller than the Size of meter by 1mm, so it is difficult to adjust the center It's a bit difficult & hellip; also, the included trash removal seal is so sticky that it's useless It is best not to use it because it is strong and leaves a sticky substance on the meter
I've been using it for almost a month now, but it's not peeling off, so if you want to protect the LCD, this is the one for you I can recommend this product
View detail
Fits: DUCATI Multistrada 950, DUCATI Multistrada Enduro, DUCATI Multistrada 1260
I'm happy with the installation accuracy
The installation was accurate, no rattling, and the instruction manual was carefully written, so I had no trouble installing it
If I had to choose, I'd say it's a bit of a cosmetic problem
But I'm generally happy with it because there's no other thing to replace it
View detail
Fits: YAMAHA SCR950, YAMAHA BOLT
Meter's visibility improved.
Purchase to ease the reflection of Speedometer. The pasting work did not go well, bubbles remained in several places, and it looks bad. As expected, light shielding was expected, Meter's visibility improved to Large. View detail
Fits: HONDA CB1000, HONDA CBF1000 FA, HONDA CB1300
It was good not to be conspicuous.
(What made you decide the purchase?)
I joined a certain Events the other day and got pouring rain on the way home, raining from the top of the Engine to the inside of Cowl, struggling to clean up and clean up. Also, as muddy sticks, I will spoil the preciously polished Exhaust pipe, so I bought it with reference to the other reviewers.
(How was it actually used?)
I still can not say because I am not running, but 15 centimeters has been longer than OEMFender, so my expectation is Large.
【Was it difficult to install? (Hard parts case)】
Ultra Strong Double-Sided Tape for installing the exterior parts of the car was abundant because there were only a few Double-sided Tape which was originally attached, so I tried installing it in detail.
【Please tell me the point of installation and hang (in the case of Hard parts)】
The Ultra Strong Double-Sided Tape I wrote earlier was too strong, trying to position it, even if I tried to peel off, I could not peel off well and it was slightly misaligned. Let's say good because you do not have to worry about peeling while running.
In Instruction Manual, it is better to remove Fender and not to say that it is not written. Screw attached to Front fork, Quantity : Pair (for Left and Right) It is easy because it only removes a total of 4. It is necessary to pay attention not to add Wound only when pulling out and putting it.
[Is there anything I was disappointed about?]
I wanted you to attach a double-sided tape a little more. It happened because it happened to have a Double-sided Tape, but it was a place I had to go to buy.
【Hope for Manufacturer ? Please let me know if there are any improvement points]
Increasing Double-sided Tape, it's still a price. Because there was a point, there are a lot of people who have flown into purchasing, so I expect in the future.
【Have you compared items?】
I can not find it in particular..
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09 Tracer
It looks nice too
Improvement of mudguard effect of Rear Fender and installation Design was good so purchase. The mudguard effect was also improved and it was good to refresh the appearance. View detail
Fits: HONDA 400X, HONDA CB500X, HONDA CB400F, HONDA CB500F, HONDA CBR400R, HONDA CBR500R
Small Prevention of stone winding up
Small stones of about 1 - 2 mm come in Shoes easily, so I installed the Extender Fender as a measure.
For installation, remove Fender, degrease, attached double-sided tape is shabby so for Emon Super Strong Double-sided Tape Aeroparts (N882) 2 / 3 Used.
In order to prevent further dropout φ4. We opened 4 holes in 5 and fixed it with the attached Rivet.
It's natural that you can not understand it because it's patchy,
Small The winding of the stone has almost gone, so functionality is enough.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Z800E, KAWASAKI Z800, KAWASAKI Ninja1000 (Z1000SX, KAWASAKI Z1000 R, KAWASAKI ZX10-R, KAWASAKI ZX6-R
Function-oriented than texture
As the mud to the Radiator is bad at the time of running on a wet road, if you extend the Front fender you think that it will be a little better..
"Texture"
It's just black material, not so good. It is also a place that I can not see much from the outside, and since Front fender itself is black color, I do not care much about it.
"Mounting"
1. Front fender desorption (Because it is easy to work)
Brake hose clamp about Fender part is disturbing, hard to detach.
2. Since the installation accuracy interferes a little with the Rivet part of Brake hose clamp inside the Fender, I cut away the extender to be attached with Cutter about 2 mm. Then Just fit.
3. Standard Double-sided Tape is too cheap for installation, so we added a commercially available Strong Double-sided Tape. Mounting with Fender Degrease the Extender with PearlCleaner, warm it with Dryer and paste it.
4. It seemed that there was no problem with Double-sided Tape alone, but fixed in the attached Pin. (Drill with 2 mm Drill)
Although the product is an impression that it is a little expensive from Material and texture, I am generally satisfied.
View detail
Fits: HONDA 400X, HONDA CB500X, HONDA CB400F, HONDA CB500F, HONDA CBR400R, HONDA CBR500R
It is quite effective
Too much expulsion to Exhaust pipe and Radiator is amazing, so the price was a little expensive but I installed it.
Jumping up was better than I thought, and I did not go to Radiator.
I dared to drill Double-sided Tape and drill it firmly in the attached Pin of Pura.
Clearance with Tire was a little worried, but for now it is no problem.
If it is a bit cheaper, the evaluation will also rise - - - !?
View detail
Durability is difficult?
I used it for about a year, it broke apart at the base of Screw of the bar.
attachment - accuracy - quality - I am sorry just because I was satisfied with the texture.
I thought that individual differences and I'm thinking whether to purchase again.
View detail
Side Stand putting in and out easier.
I searched for a product that fits my Motorcycle, but I think that there is no product that fits perfectly and it may be somewhat difficult to purchase. I managed to install it somehow. It is now convenient to take out and take out Side Stand after installation. View detail