Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
Wound prevention
I had a hard time attaching it, but I managed to do so. View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
[Color] Clear Protection Seat
It was easy to install, just spray water with a misting spray and use the included brush to release air bubbles. View detail
Fits: YAMAHA MT-07
No problems so far.
I installed it at the same time I took delivery of my car, and even if some small bubbles remain, they will naturally disappear after a few days, so there is no loss in buying it.
Even I, who am not very good at pasting, was able to paste it normally, so I recommend it!
Two types of filmQuantity:Each package contains 1 pc. so even if you make a mistake, Large is sturdy.
View detail
Fits: SUZUKI GSX-S 1000 GT, SUZUKI GSX-S 1000 FA, SUZUKI GSX-S 1000, SUZUKI GSX-S 1000 GX
Without it, water will splash on your back.
It was installed on a 2017 GSX-S1000.
When installing the product, remove the Axle Shaft and reverse the Nut side. Also, the rear axle block on the product installation side is no longer necessary.
If you are not confident about doing the installation yourself, it is better to have a Motorcycle shop do it for you.
The Fender Eliminator causes a lot of splashing, but I am satisfied that this product eliminates a lot of the splashing.
Visual also differentiated itself from the others and made Parenthesis look good.
View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
Screen protect film for CB1000R (2022)
98% of accuracy fit but not enough sticky... it just easy to remove by wind or hazardrus... but the visual is fine it has two type film include. one is matt (what i used) and another is Glossy shine if i use the glossy film, the street light or sunny day the lights will punch your eyes View detail
Fits: HONDA CBR1000RR-R FIREBLADE
Meter panelProtectionFilm
Meter panel on cbr1000rrr was added because it is easily scratched.
The installation was easy since it is a dedicated product.
Translation (Instruction Manual is also included.
View detail
The effect is Large-Thick, though not noticeable Custom.
As shown in the image, extend Rebel's shorter FFender by 14 cm.
It fits just right in terms of shape, not so much that it disrupts the original design.
If you are not an owner of REBEL, you may not even notice that it is installed.
A fixed pin is included in the package, but I am not confident enough to drill a hole in the Fender.
Double-sided tape is the only fixation.
This will reduce mud splash etc. to the Radiator area to Large width, which will also make maintenance easier.
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Meter panelFilm
The Meter was applied to the Meter without wrinkles as long as the dust was removed cleanly. View detail
Fender removal was requested by DREAM.
The description here says it is easy, double-sided tape only, but it also says that if it has Small cherry biz, it needs to be fixed. When I bought it, it was attached beautifully, so I was not sure what to do with it, but I wanted to install it neatly, so I tried to find a way to remove Fender, but this was quite Large strange. So I took it to DREAM and had them remove it and put it back on again. The price was only a few thousand yen.
I degreased the surface, installed it with double-sided tape, cured it with masking tape, and then decided where to drill the holes. I think it is better to drill the holes inside the corners of the fender to prevent cracking and bending.
The effect is outstanding. I know a lot of people get their Radiator dirty from mud bouncing off even the slightest puddle, but with this on, it doesn't get dirty at all!
View detail
I was able to fit it without that much discomfort.Large sturdy, even for a 2017 model.
The color of the Fender is matte black, so I was able to install it without much discomfort. I worked with the Fender installed on the side, but it is easier to work with the Fender removed. If you want to use the fixed pin, you need to drill a 4mm hole so that you don't accidentally stick the tire in. I haven't done any real wet weather driving, but the Fender is extended and seems to work well. It was installed on a 2017 RC90, although it is not correct in terms of fitment. I bought mine because this one had a faster delivery time, but only at my own risk. 4 Pins were included, but I'm using 2 for now and seeing how it goes. View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
For LCD protection
[How is it used?
Paste into MainMeter
Was the one you received as per Image?
Street Image
Was the installation difficult?
It's a little difficult to stick it so that it doesn't get air bubbles.
How was your experience with it?
There is a sense of being protected.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Fits: BMW C400X, BMW S1000XR, BMW S1000R, BMW R1250RS, BMW R1250R, BMW R1250GS, BMW M1000RR, BMW M1000R, BMW F900XR, BMW F900R, BMW F850GS, BMW F750GS, BMW S1000RR, BMW S1000RR, BMW F900GS, BMW M1000XR, BMW R1300GS, BMW R1200GS, BMW F800GS
The size was perfect!
It arrived soon after I placed the order. I ride a C400X and my wife rides a C400GT. [Color] With Clear [Color] Quantity in Smoke:I installed the two sets of 2pcs. on each of them. I was able to apply it to both units without any air bubbles, and I feel that the meter is now easier to see. I am glad that I purchased this product because the dirt on the meter can be easily wiped off. View detail
Fits: DUCATI Panigale V4, DUCATI Streetfighter V4, DUCATI Diavel V4
Great
I like that it comes in two types, Antiglare and Super clear. It was easy to apply. View detail
I was able to do this without removing the Fender
Front Fender cannot be easily removed.
Therefore, it was necessary to devise a way to keep the Drill tip from hitting the Tire when Drilling and to keep the Extender in close contact with the Fender.
From both SIDE of the Fender, a thin chi board was inserted to protect the Tire and to compress the Ex-Kender.
It is a good idea to use masking tape during drilling to avoid scratching the Fender.
Fender is quite stiff.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
2021~MT09
You can put it on just like a cell phone Film!
Perfect for Meter Protection!
View detail
Headlight Fairing from P&A International
* About quality and texture, The headlight fairing surface is finished smoothly inside and out. The P&A International colours perfectly match the up with the OEM paint. * About the feeling of use, The windshield is helpful to cut down on the amount of wind your body is subjected to at higher speeds. The headlight fairing also give the Monkey 125 a cool look while adding some protection to the instrument guage. * Products to buy together, P&A International also sell a extender fender for the front chrome fender that will cut down on the amount of water splashing over the engine and it's sensors along with your low legs when you're out riding in the rain. * Difficulty of installation, The headlight fairing is secured to the included metal brackets which are then attached to the headlight mounting bolts. The process was completed in 30 minutes with little difficultly. * Cost performance and comparison with other products, This headlight fairing is an expensive item but with it's matching colour paints and styling you can see why when comparing it to the cheaper tinted windscreens that are available here also. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you have an aftermarket tachometer mounted next to the instrument guage you may have clearance issues and could need to reposition it slightly. View detail
Fits: Others
To the 2016 R1200GS
Heller SocketType USB powered Accessories were expensive or out of stock only when I wanted them.
I was about to run out of battery in Touring the other day, so I finally bought this one because it is Universal, cheaper than OEM, and seems to come with a waterproof cover.
I installed it immediately and there was no problem with the handlebar or others interference. The power supply is also good, and charging the phone is no problem.
The included waterproof cover is a type that hangs from the body with a loop, but there is not enough room in the length and I think it will come off sooner or later…
View detail
Fits: TRIUMPH Speed Twin 900, TRIUMPH Scrambler 900, TRIUMPH BOBBER, TRIUMPH SPEEDMASTER, TRIUMPH Street Twin 1200, TRIUMPH Street Scrambler
Satisfied
Similar products purchased and installedLarge failure in the past.
I once had a MeterSeat stuck on me that was wavy and dirty!
Purchased with no expectations with a half given up MODE.
This product is a little firm and hard
I was worried about whether the MeterGlass of BonnevilleBobber's 3D Lens would Fit…
Even as an amateur, I was able to apply it beautifully without any waves or bubbles, thanks to the instructions in the Instruction Manual.
It is important to mist the adhesive surface with water diluted with kitchen detergent.
Once it is applied, break it in with the scraper provided.
After a few hours, the air bubbles are gone and it's all one piece.
It helped to have another one in Failure or for Replacement.
View detail
Fits: MOTOGUZZI V85TT, APRILIA TUONO V4 1100, APRILIA TUONO 660, APRILIA SHIVER 900, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA RS660, APRILIA DORSODURO 900
ApriliaRS660 Meter panel Protection
The installation process was easy with no problems.
Panels are also protected and dirt is not a concern.
Large durable even after car wash.
View detail
Recommended for those who ride in the rain, such as commuters.
I think it is effective Large for those who ride to work etc..on rainy days like Title.
I never ran in the rain. (Impact of increased telecommuting) It will be a decision of about 5? on the way back.
I think the effect was to reduce the amount of dirt on the exhaust pipe and cylinder fins.
In my case, it may be a mistake when adjusting to Fender, but it is a little Quantity.:Pair (for Left and Right) Clearance of the "A" was different, but I think it is a resin molding product, so it is totally acceptable.
I used the supplied double-sided tape for 12 hours of crimping and 2 pieces of the supplied Nylon rivet just to be safe.
Double-sided tape is divided into parts, and the instruction manual makes it easy to understand.
I have a Nylon rivet, Φ4Drill to drill the hole, but I think you need to be careful about the position of the hole, the length of the neck and the push of the Rivet is the limit and it was hard to insert. It is recommended to find a good position as thin as possible. I was just eyeballing it, so it was at the limit. Also, Rivet is convenient because it can be inserted with bare hands.
View detail