Reviews
Perfect fitting, great protection from water and mud splashing around the engine!
I was concerned about the double-sided tape that came with the product, so I used the Scotch vehicle tape I had on hand and installed it on the FFender.
Even if you don't use the supplied Anchor Pin, there is no sign of it coming off.
It's an Exclusive Design and the fit is perfect!
Dramatic reduction of water splashes and mud splashes!
Cleaning the fins of an air-cooled horizontal engine can be troublesome, so this item is a must-have for owners who need to run on wet roads.
View detail
Alright
There is a lot of mud splatter when you use the Fender Eliminator. So I put these on. I posted this about 2 weeks after I put it on and it got rained on during my commute. I also work from home, so I haven't tested it enough, but it's nice.
Installation is very easy. Clean with the included AlcoholSeat
It is glued with Double-sided Tape and left for 12 hours.
I leave it crimped with Shako. After that, I drill the clip of the attachment with M2Drill and melt the reverse side with a lighter to make it difficult to peel off. So far, it has come without a problem. It is convenient if you have the type that does not have a shako in the home center because it is sold for 2~3 hundred yen. The instruction manual is included and it was kind to the beginner.
View detail
Fits: YAMAHA MT-09SP, YAMAHA MT-09
Buy as soon as possible.
I think that it is good to buy and stick it early because it is the part where the abrasion is inevitably attached, but the abrasion which was originally attached when I stuck this product became not so conspicuous, and I am satisfied.
Two SheetsQuantity:It is Set, but since I put the Clear one, AntiColor:Sorry, I don't have an assessment of what Gray is like.
When the scratches on the Clear side become noticeable, AntiColor:I would like to try Gray as well.
Two SheetsQuantity:I think the price is a bit high for Set.
View detail
Fits: DUCATI Panigale 959, DUCATI Panigale 899, DUCATI Panigale 1299, DUCATI Panigale 1199
For dirt and scratch prevention
It is not difficult because it is the same procedure as the film that sticks to the Smartphone, but when sticking it, the Screen hit the hand and was Large strange.
I don't have to worry about scratches when I put gloves on it.
View detail
Super effective in reducing water splashes and mud splashes on FFenders!
The double-sided tape that comes with the product has a little bit of anxiety about the adhesiveness, so I used 3M's Double-sided Tape for Cars as the main adhesive.
Then, even if you don't put the attached Penetrating Pin for fixing, it can be fixed perfectly, and there is no sign of coming off even if you use it for more than 500km.
Exclusive design and perfect fitting. (I'm not planning on riding this GROM in bad weather though) In the event that you encounter rain with the Ron Two, you can clearly see that the dirt will be drastically reduced.
If you don't want to get your Motorcycle dirty, this is a super Recommendation product.
In addition, although the for rear is also out, I have already taken measures with Universal Product which I bought in Amazon, and because the for rear is a little too expensive, there is no plan of the purchase.
View detail
Fits: HONDA CBR1000RR FIREBLADE, HONDA CBR600RR, HONDA CBR600RR
Too good.
This is the Clear type and the Type and Quantity that suppress the reflection of the light without gloss.:I think it's a good deal because it says 1 Set of 2pc. It is Quantity to put on.:It's 1pc. so you may not use it even if you have 2 cards, but I think it's better to have more than one, so.
In addition, it is not necessary to use a water solution to apply the film, as is the case when applying car films. (A little bit of neutral detergent) I think that it is much easier and more beautiful to finish the work using
When I was looking for this product, I was looking for Quantity:I didn't notice that it is 1 Set of 2pcs. so you can divide it with people who drive the same car model, or you can use Quantity:I want more to be 1 Set of 2pcs.
View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
Large is strange for clumsy
The air vent was LARGE weird. I was clumsy, I used two sheets, and in the end, there was a little left. It's also a bit Large than the LCD. View detail
Fits: HONDA SUPER CUB C125
I can't get it to stick.
I can't get in properly.Quantity:1pc. failed. 2pc. failed. View detail
Peitzmeier Company Extender Fender
There was a lot of bouncing off the front wheels when it was raining or there was water on the road, but after installing the Extender Fender I was pleased with the effect. It is best to remove the OEM Fender when installing it. View detail
Fits: YAMAHA Tracer 9 GT, YAMAHA Tracer 9
It really got rid of the air bubbles!
It's a foreign product, but the translation (please input it here, the explanation is also written. But, I started to work without understanding the meaning.
In the meantime, clean the Meter part with the included CleaningKit and wet the Meter with Spray with detergent to work on it. It'll start to thirst soon, so get busy!
After I put it on, whoa! There's a bubble! I tried so hard to push it out, but it didn't go away.
Well, Quantity:It comes in 2 Sets, so let's hold out for this Season.
and a week after such work.
When I looked at the Meter, I saw that all the bubbles were almost gone! The product description didn't lie,... (Lol)
Unfortunately, the Tracer9gt is divided into a protective seat for each side, so there is a gap between the seats. It seems to collect dust.
View detail
Fits: DUCATI Panigale 959, DUCATI Panigale 899, DUCATI Panigale 1299, DUCATI Panigale 1199
meaningless
No Anti-Reflection, Ultra [Color] Clear can be used to prevent scratches, but Anti [Color] Clear only fogs Meter and is not anti-reflective. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Stepped areas cannot be protected.
The 21model MT-09 Meter has a step, so this film is also divided into 3 parts. This is the reason why this film is divided into 3 parts. It can't protect the bumps, but it can protect most of the area. View detail
Fits: SUZUKI Katana, SUZUKI GSX-S1000FA, SUZUKI GSX-S1000, SUZUKI GSX-S1000GT
The back is appropriate...
Screw hole applicable, with mounting
Bumpy back side.
It's hard, trying to keep it clean, you know?
Well, is this what motorcycle parts are like?
Out of all the Motorcycle FRP Parts I bought, the only one that was not modified was the Tank Cover for the New Model KATANA by Ohno Speed... (And the back side was clean too!)
Do you guys install them without worrying about it?
You're leaving it up to the Shop, and you don't even know it...?
View detail
Fits: HONDA CBR1000RR FIREBLADE, HONDA CBR600RR, HONDA CBR600RR
No harm in using it.
[How is it used?
I use Motorcycle for Touring use.
Motorcycle is stored outside in a covered area of the bike parking lot.
The model used is the CBR600RR '21.
Was the one you received as per Image?
The appearance which arrived was Package which felt that it was not a domestic product to see, but there was no negative impression such as the exterior was dirty.
How was your experience with it?
Antiglare、 [Color] It contains one piece of Clear Seat each.
In addition, what is often bundled with Smartphone such as WetPaper to be used when pasting to Meter as is also in the product name is 1Quantity:It was in the Set.
The Instruction Manual is also included, but it's not very helpful because it describes several languages and sentences on one sheet. However, since many people can understand what it is for at a glance, I did not have trouble with Large.
I put Antiglare on it, but I felt like it was harder to see the meter than before I put it on to suppress the reflection. [Color] Recommends the Type of Clear.
It's not fatal, such as never being visible in Antiglare.
[Points to note]
It might be a good idea to get a mist spray beforehand at a 100-yen store.
It's not essential, but I think it's better to have it so that you can apply it efficiently and neatly.
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
neither good nor bad
After a little use, the edges started to float slightly.
Probably not enough adhesive on the subtle curvature of the edge of the screen.
Well, it's generally stuck to the surface, so if you don't mind the details, I think it's large and durable!
View detail
Fits: Others
Very practical product.
F800GS has 1 Heller Socket next to Ignition key, but it can be converted to USB x2 by using this Power Socket. it is very easy to use as the power supply source when the device is mounted around Handlebar. It is very easy to use. The charging cable is also very short, so it is easy to use and refreshing.
The Waterproof Cap is opened during use, so it cannot be used in the rain.
The price is reasonable and I would recommend this product for Heller Socket equipped vehicles.
View detail
Fits: HONDA CBR250RR
Size is Large
It is similar to the Film on your phone and is Cut specifically for your car model.
The Instruction Manual says that the film is cut small, but no matter what position I put it in, it doesn't fit properly.
You have to Cut the edge by yourself.
Cost performance is poor.
View detail
Fits: Others
I bought this to charge my SMART phone that I use as Navigation.
I used it twice for long distance touring, and the product was reliable and very convenient. When not in use, because the Cap is attached, there is no worry about the trouble of the USB insertion port by rain, dust, etc. In addition, because there are two ancestors, I am thinking that I will try to put it on with Radar. View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Size is different in a good way.
As I recall, someone else had written, "Included Parts:other than Seat" were very substantial, and I was able to put up a large part of it beautifully even though I was working outdoors in the wind while holding back my desire to go to the Toilet.
As I wrote in the title, it is Exactly to the hole of Camera like Seat of Mobile phone. The size was a little bit smaller than Meter, but this is the result. It's okay. I also feel like it led to a feeling of sticking. I can't stand it if the dust of Trunk or Door of the car changes even 1mm! I can't recommend it to people who can't stand it, but I think more than 90% of people It's okay. I think it will be.
Some of the air bubbles were almost there, but after a while, they were gone.
I use the matte one, but I can tell the Speed even in the daytime, so I think it's far better than the SmallWound on Dust or something.
View detail
impossible to install
The shape did not fit and could not be processed, so it was Garbage. View detail