Reviews
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
It's difficult, isn't it?
I put Meter's Film on the new car.
I thought it was no different than GlassFilm for cars.
He applied it with a mild detergent.
Eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee dust ・・・・ tears
That's a tough one.
I wouldn't worry too much about it since it's for Meter Protection purposes.
Fortunately, it is expensive and contains two different types of films.
I'll try again next time.
You must be a PRO to be able to do this so beautifully.
View detail
Fits: HONDA CBR1000RR FIREBLADE, HONDA CBR600RR, HONDA CBR600RR
For Meter Protection
Purchased for Meter protection as per Title
It came with two sheets, AntiglareType and Super clearType, and I thought it would be nice to be able to choose the one I prefer.
Antiglare was selected for this project and Super clear was kept as a spare.
The accuracy is a little low and some parts are not fully covered, but it is acceptable. The view is not particularly different.
View detail
Fits: YAMAHA MT-07
Exclusive products are nice!
I purchased the Motorcycle right after I took delivery of it and put it on.
I was able to install it before the small scratches started, so I bought it later.
I felt it was a good product to have!
View detail
Fits: YAMAHA MT-07
Second purchase
Repurchased because after a year from the last one, it gradually bubbled and peeled off from the edges.
Originally, it was already Quantity:1pc. so I don't have to buy it yet, but in my case, thatQuantity:1pc. wind blew it away so I had to repurchase.
View detail
Fits: KAWASAKI H2 SX SE, KAWASAKI H2 SX, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000GX
For LCD protection
Quantity:First of all, you have to wonder which one to put on the 1 Set of 2pcs.
Antiglare was selected because it is often run during the day.
It is not so difficult if you follow the Instruction Manual carefully.
View detail
Fits: HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR500R, HONDA CBR650R
It was applied beautifully.
I have a HondaCB650R 2023 and it was Exactly. I think it was applied beautifully without any bubbles. View detail
Fits: KAWASAKI H2 SX SE, KAWASAKI H2 SX, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000GX
I could put it on Beauty!
Purchased to prevent Wound on Meter panel
Meter panel and film with water mixed with a small amount of neutral detergent.
Spray both and affix.
Air bleed with the included Card and you are done!
I'm happy with how it looks on Beauty.
View detail
Fits: DUCATI Panigale V4, DUCATI Streetfighter V4, DUCATI Diavel V4
Seal to protect the Meter screen.
Seal to protect the Meter.
It's like putting it on your phone.
Scratch protection, more secure with it than without it.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
PanelProtection film was applied prior to delivery.
I bought a new car at Kawasaki Plaza, so I was able to put it on on the day of delivery in an environment free of Garbage and dust in the store.
Kawasaki Plaza was also pleasant enough to take the time before explaining the delivery of the car, and I was able to attach it with a sense of calm and peace of mind.
I was able to paste it well.
Since the size is a little smaller, place the film on the panel in advance and check the gap size around the film in the panel.
Image and then paste with Just fit.
Since the patterned paper is included in the product bag, it can be applied beautifully by gently pressing down on air pockets and the like.
I pasted the Super clear (transparent) one, but it looks like it is still OEM with nothing pasted on it, and I didn't realize it was attached.
It is a beautiful finish that I can't believe. I would eventually like to purchase one from the same Manufacture when the Panels are damaged.
View detail
Fits: HUSQVARNA Norden 901, KTM 125 DUKE, KTM 1290 SUPER DUKE R, KTM 1390 SUPER DUKE R, KTM 390 DUKE, KTM 790 Adventure, KTM 890 Adventure R Rally, KTM 890 Adventure R, KTM 990 DUKE, KTM SMT 890
Almost satisfied
[Color] Clear and Glare? (Matte look) Quantity:1 Set of 2pc. for now. [Color] The size is also good, but the end face is a little floated or a little air is coming in. It doesn't bother me that much, so it's OK. View detail
Fits: HONDA CBR1000RR FIREBLADE
I'm satisfied
Bubbles were left on the bumps at the right end. I would have liked more clear instructions on how to work with it.
I am considering repurchasing.
View detail
Fits: HONDA NT1100, HONDA CRF1100L AfricaTwin
Large screen size is not just Film
[How is it used?
Introduced to protect expensive Touch panel.
Was the one you received as per Image?
It is slightly smaller than the Large size on the screen.
Was the installation difficult?
It was somewhat difficult for a beginner like me.
Especially the positioning and dusting.
How was your experience with it?
The screen is less reflective, but it does not completely reduce reflections. (I guess that's to be expected.)
[Included Parts:were they on?
AlcoholWipe, Squeegee, Dust Removal Seal, Instruction Manual, and everything else that usually comes with the purchase of a protective film for smartphones.
[Was there anything that disappointed you?
As stated in the title, it is a little small for the object (screen) to which it is pasted.
Point and hang of installation
Do not try to install it using only the accessories, but use a solution of 500?water and a few drops of neutral detergent in a misting sprayer to apply it.
Dust is difficult to get into and easy to position.
Youtube, etc. How to apply protective film I think it would be better to search for a place to start with and then try to imitate it.
[Notes]
As I have mentioned many times, the film is a little small for the screen.
(If the film is larger than the object to be pasted, the edge of the film will float. In short, it is a matter of precision.)
Note that this is mentioned in the Instruction Manual, but not in Webike's product description.
[Opinions and requests to Manufacturer
Please improve the accuracy of FilmCut and come out with a product that can cover the entire screen.
View detail
Fits: SUZUKI Hayabusa
Wound Prevention
I put it on to prevent scratches on Meter.
It was already attached when the car was delivered, so it is not on the road without being attached.
There is no foggy feeling, and the transparency is so high that it is easy to forget that it is there at all.
Also, two sheets are included in the package, so there is no need to worry about reupholstering or making mistakes.
However, it would be better to remove the Meter from the car body when attaching it, and to do so with a Single Body.
View detail
Fits: SUZUKI V-Strom 250, SUZUKI GSX250R
So-so.
I bought the Motorcycle new and it was scratched from the start.
I was worried that I wouldn't be able to apply it properly and neatly, but I was able to apply it in the same way as I do with my smartphone. Once I was able to put it up well. Sweat
I don't know about durability, etc. yet, but this time I put non-glare on it.
If there is deterioration, etc., another one. [Color] I will put up a Clear.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
Meter panel protective film to protect from scratches
Asking PRO to protect the Meter panel just in case it seems to fail to stick.
The workmanship is good, but I am not very satisfied with the overall cost performance, including the labor cost.
About the contents of the product, 2 FilmQuantity:It is a Set, but Antiglare is not necessary and two Super clear cards are fine.
If you fail, there's always the next time ….
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Price suitable
It was put up at the same time as the car was delivered.
All Quantity:It comes in a set so it can be applied right away.
I don't think air will get in unless it is very messy.
However, the visibility will be adequate.
Do you want to see the OEM intact and clear, even if scratched?
Do you want to endure the visibility and continue to ride in peace?
Can it be scratched in the first place?
I feel safe. (Insurance for the mind) I chose the
View detail
Fits: HUSQVARNA Vitpilen 701, HUSQVARNA Vitpilen 401, HUSQVARNA Svartpilen 701, HUSQVARNA Svartpilen 401
Before the scrape gets in.
I purchased this for Svartpilen 401 2021.
The Meter surface of this MODEL is a MATERIAL that could easily be scratched if rubbed with sand and dust.
If anything goes wrong, it will be a very noticeable area, so it would be good to deal with it as soon as possible.
While Film seemed to be firm and thick enough to protect it, its strong resilience gave the impression that it was a bit difficult to apply.
After applying the first sheet, I realized that it would work better if I positioned the corners, lightly fixed the position with masking tape, and then started peeling off the backing.
It's a micro-small bubble, so that's good, but I plan to do so the next time I reupholster it.
Since it comes in a two-pack, even if it fails a little, there is peace of mind knowing that there is always a next one.
If it were a little cheaper, I would give it a perfect score.
View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
Should be put up at the time of a new car.
It also comes with a fine outer bag, a dust remover Seal and CROSS when pasting.
I don't understand why glare and Antiglare are combined, they should be sold separately.
The edge treatment and shape are highly accurate, and the Small anti-scratch effect is outstanding, so I wanted to put it on when the car was new.
I don't know about durability. If it is bad, I will add a note.
View detail
Fits: YAMAHA YFZ-R7
Scratch prevention!
Meter surface was commented to be easily scratched
I purchased and installed it since it is a new car.
Seat is Quantity:1 Set of 2pcs.
Other, Surface Cleaning sheet×Quantity:1 pc.(same as anti-fog for Glasses?)
ditto mark Cloth×Quantity:1pc.
ditto mark Stretching pattern paper (Material):(Plastic)
Instruction Manual (Translation (please enter here))
View detail
Fits: HONDA REBEL 250, HONDA CL500, HONDA CMX500 REBEL, HONDA CL250
If you want to use your Meter for Beauty, it's Recommendation!
This is the OEM version, but I will post it as a reminder of how it feels to have it installed.
Purchase and installation should be done at your own risk.
Installation time:10 min.
Required tools:WetPaper (included), dusting sealet, etc.
? Place the protective Seat on the Meter and hold the Paste Image.
? Wipe with WetPaper→CROSS until you feel comfortable.
? Remove the entire area with a dusting Seal.
? Peel off about half of the first Seat of the protective Seat and decide the position for pasting.
? Paste while rubbing with the attached plastic board etc. so as not to leave air bubbles.
? If air bubbles remain, try rubbing them with a plastic plate, etc. to see if they disappear.
If not, peel off the tape with Seal or Cellophane tape and reattach it.
? In case of dust, peel off to the relevant area and remove with a dust remover seal.
*It will be an outdoor job, so if you don't work on SPIDI, a lot of dust is likely to get in.
I stuck it on after a month of purchase because I was concerned about dirt and scratches on the Meter.
A minor scrape or two is no longer visible.
Some of the ones I purchased on Amazon were quite SmallSai protective Seat, so please be careful when purchasing (it said it was for Rebel 250).
View detail