Reviews
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Let's put it on carefully.
I couldn't imagine a situation where I would get hurt by a meter, so I wondered if it would make sense,
I bought it just in case I had to use Gloves when I got a little dirty or something.
Quantity:2 Set (Super clear and Antiglare) I had a Super Clear, but I thought Antiglare would make it difficult to see the meter, so I put Super Clear on it.
Super clear really looks like just Film; Large is probably sturdy since the manufacturer says it is very abrasion resistant.
It left a few air bubbles, but the Manufacturer The film is excellent in that if there are some air bubbles, they disappear naturally within a few hours to two days. It facilitates a satisfactory installation." I believed it would disappear, but it did not.
Paste carefully.
View detail
Fits: HONDA CB1100RS, HONDA CB1100EX
It's hard to say...
The size is also a little small. The CB1100 meter is difficult to position because the part to apply the meter is deep....
View detail
Fits: HONDA CB1000R
Easy for everyone, not for everyone.
I'd probably buy this 3-Quantity.:4 Set
because Somehow I'm not satisfied with the finished product." From
What I mean is that, first of all, the design phase Film shape/effect after installation." The accuracy of the product as a "product" is satisfactory, but the manufacturing process Accuracy and quality as a final product." not very good
The manufacturing method is probably to stamp out the Seat with a die, but the fine BALI is left in a few places on the edges, so no matter how much you apply it to Beauty, those few places will float…MeterFilm is not a very strong product, so it is not strong enough to stick, so it will float a little bit. It's a little bit of floating, but it bothers me a lot, and once it floats, there's nothing I can do to hold it back.
As a solution, you can cut the straight edge of the Film by 0.1mm before applying it. (I had to buy several times for this reason, resulting in a huge surplus of Antiglare).
So (Okay, okay, you put it up well.) I was gently wiping the corners of the bag, and it caught a corner and floated away, and then I got a fine dust in it and said, …... "… You really are a …" something like that
Image of the product. Pi Turn!" But you should not expect perfection!
Of course, if the compromise point were lowered to the extreme, Large would be sturdy, but since it's always in sight, that's not going to happen in the end. (It's my fault.)
Maybe the finished product would be better if I made it myself using Free cut for PC….
View detail
Fits: HONDA NC750X
Dimensions are correct, but air bubbles remain on the edges.
Pasting was easy. The dimensions were correct and I was able to apply it without any large gaps. However, although it is inevitable due to the quality of the product, there were some air bubbles at the edges of the film. It is like pasting a cheap smartphone film. This is something that cannot be helped, so I will use it without worrying. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Are all Manufacturers similar?
How was your experience with it?
It is no different than screen protection for cell phones.
It is not GlassFilm, just Film.
Contents include Super clear×1, Antiglare×1
Super clear was used this time.
On White's Table [Color] I'm putting Clear and Glare, although it's hard to see in the light.
The glare looks more Cream colored.
The purpose was to prevent scratches on the screen, so we didn't really want anything more than that.
I think it depends on the shape of the Motorcycle, but on my Motorcycle it was very difficult to stick.
It can be re-stretched many times, but the adhesion will inevitably weaken.
Thickness is very thin.
I guess it depends on the shape of the meter, but there were many areas that could not be covered because there was quite a distance to the edge.
Also, it is difficult to paste this again due to the split type.
I understand that it is hard to keep the price low because it is a Motorcycle product and it is not easy to produce a large number of them.
Still, this Gold amount seems high for this content.
However, the initial objective of not using scratches has been achieved.
This is the kind of thing, I think it is for people who just need to be prevented from scratching.
How did it compare to other products?
No comparison because we have not purchased any other company's products.
However, it seems that all products are the same and there is not that much difference in Large.
It may be a good idea to buy a cheap Large land-based product before you ruin it.
[Points to note]
Be careful about re-stitching. It is not impossible, but the edges will inevitably become worse.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
I'd like to see them lower the price and at least consider replacing it as a consumable item.
I want GlassFilm to be the same as the cell phone, easy to apply.
View detail
Fits: ROYAL ENFIELD Himalayan
I can't get rid of wrinkles.
The installation was carried out in accordance with the Instruction Manual.
Wrinkle could not be removed.
I thought it would go away with time.
I left it alone, but some of it remained.
Also, when you peel off the adhesive Cover.
It didn't peel off easily.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Care must be taken when attaching the protective film to the Signal screen on both SIDES.
There is also a pasting Instruction Manual, and the product is relatively meticulous.
The paste itself can be applied with a feeling similar to that of a protective film on a cell phone.
The process itself is simple.
However, the Instruction Manual for the product stated This product is about 2-3mm smaller than the screen size. and take the wording at face value will fail.
Particular attention should be paid to the long, narrow sections on both SIDE.
If the film is applied in advance and placed 2-3mm away from the edge as described in the Instruction Manual, the protective film on the main screen side will float because the space between the two SIDE screens and the main screen is like a slope.
It seems better to stick both SIDEs just a little bit away from the edge.
If you pay attention to the above notes when pasting, I think it will clear up nicely.
View detail
Fits: YAMAHA YFZ-R7
It's normal
It is different from the ones sold on Amazon. So the size is exactly Large and sturdy.
If this were a glass or something like that, it might have received a better evaluation, but it is just a transparent resin film.
Why am I worried about durability (weather resistance)?:1 Set of 2pc.
Well, considering the risk of accidents, resin is probably appropriate.
It is easy to work with, and unless the area is very dusty or dirty, I think it will stick beautifully.
As the previous poster said, it still seems overpriced.
View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 1000
Two types of Seat
It contains two types of Super clear and Antiglare.
Antiglare was Meter difficult to read Level, so I stopped.
I don't think it fits AnalogMeter.
It is cut to a small size to prevent floating.
The smallest Seat was difficult to position due to the large size of the limit, and it floated a little.
It is good because the work can be done reliably with the included items.
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125
Meter panel protection
Seat is Ultra [Color] It came in two types, Clear and Antiglare. The one we stuck on was Ultra [Color] Clear. A working Tool and Instruction Manual were included. It is easy to install. This will prevent Small scratches on the panel surface. View detail
Fits: SUZUKI SV650, SUZUKI GSX-S750, SUZUKI GSX-S1000
Quantity:I need to cut the price in half for 1pc.
It's a two-disc set, Antiglare and Clean.
I would like to see either one of them cut the price in half for that one.
This is because once the panels are attached, they will not be changed again soon.
In my case, I found Antiglare difficult to see.
[Color] Clear.
View detail
Fits: HONDA GROM, HONDA CRF250, HONDA CBR500R, HONDA CBR400R, HONDA CB500F, HONDA CB400F, HONDA CB500X, HONDA 400X
Quantity:1 Set of 2pcs. is a sense of security.
I replaced the PanelProtection film that I had been using for some time because it was scratched. The texture is soft. It was difficult to remove the air from the film. (See picture, a little air bubble was left on the Right Side). However, the kit has two pieces, so even if I fail once, there is another piece, so I don't have to worry. We will try again later. View detail
Fits: BMW C400X, BMW S1000XR, BMW S1000R, BMW R1250RS, BMW R1250R, BMW R1250GS, BMW M1000RR, BMW M1000R, BMW F900XR, BMW F900R, BMW F850GS, BMW F750GS, BMW S1000RR, BMW S1000RR, BMW F900GS, BMW M1000XR, BMW R1300GS, BMW R1200GS, BMW F800GS
I thought it would be sufficient for protection.
I feel that it does not match the shape of the Meter and the Large size of the Meter.
(There is a bit of a skimmer.)
Well, there seems to be no problem.
View detail
Fits: BMW C400X, BMW S1000XR, BMW S1000R, BMW R1250RS, BMW R1250R, BMW R1250GS, BMW M1000RR, BMW M1000R, BMW F900XR, BMW F900R, BMW F850GS, BMW F750GS, BMW S1000RR, BMW S1000RR, BMW F900GS, BMW M1000XR, BMW R1300GS, BMW R1200GS, BMW F800GS
It's neither good nor bad
The product itself is a soft film made of PET material. I don't know what kind of film the DealerOption film is, but I think it's a good cosmetic product. View detail
Fits: MOTOGUZZI V85TT, APRILIA TUONO V4 1100, APRILIA TUONO 660, APRILIA SHIVER 900, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA RS660, APRILIA DORSODURO 900
[Color] Only Clear is useful.
I was concerned about the reflection, so I applied Antiglare first, but the lack of transparency made it very difficult to see the screen, so I removed it immediately. It is dangerously hard to see.
[Color] I am satisfied with Clear in terms of screen protection as I can't even tell if it is attached or not.
Antiglare was Garbage.Quantity:1 Set of 2pc. if available [Color] I think I'll just use two Clear cards.
View detail
Fits: TRIUMPH Tiger 900 Rally Pro, TRIUMPH Tiger 900 Rally, TRIUMPH Tiger 900 GT Pro, TRIUMPH Tiger 900 GT, TRIUMPH Tiger 900 Rally Pro, TRIUMPH Tiger 900 Rally, TRIUMPH Tiger 900 GT Pro, TRIUMPH Tiger 900 GT
Is it a work sKill problem….
I was not able to put it on without any air bubbles, but I was able to put it on without worrying about it. At any rate, it looks so much better than without it. [Color] I feel Clear. View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
Large is strange for clumsy
The air vent was LARGE weird. I was clumsy, I used two sheets, and in the end, there was a little left. It's also a bit Large than the LCD. View detail
Fits: YAMAHA Tracer 9 GT, YAMAHA Tracer 9
It really got rid of the air bubbles!
It's a foreign product, but the translation (please input it here, the explanation is also written. But, I started to work without understanding the meaning.
In the meantime, clean the Meter part with the included CleaningKit and wet the Meter with Spray with detergent to work on it. It'll start to thirst soon, so get busy!
After I put it on, whoa! There's a bubble! I tried so hard to push it out, but it didn't go away.
Well, Quantity:It comes in 2 Sets, so let's hold out for this Season.
and a week after such work.
When I looked at the Meter, I saw that all the bubbles were almost gone! The product description didn't lie,... (Lol)
Unfortunately, the Tracer9gt is divided into a protective seat for each side, so there is a gap between the seats. It seems to collect dust.
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
neither good nor bad
After a little use, the edges started to float slightly.
Probably not enough adhesive on the subtle curvature of the edge of the screen.
Well, it's generally stuck to the surface, so if you don't mind the details, I think it's large and durable!
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Size is different in a good way.
As I recall, someone else had written, "Included Parts:other than Seat" were very substantial, and I was able to put up a large part of it beautifully even though I was working outdoors in the wind while holding back my desire to go to the Toilet.
As I wrote in the title, it is Exactly to the hole of Camera like Seat of Mobile phone. The size was a little bit smaller than Meter, but this is the result. It's okay. I also feel like it led to a feeling of sticking. I can't stand it if the dust of Trunk or Door of the car changes even 1mm! I can't recommend it to people who can't stand it, but I think more than 90% of people It's okay. I think it will be.
Some of the air bubbles were almost there, but after a while, they were gone.
I use the matte one, but I can tell the Speed even in the daytime, so I think it's far better than the SmallWound on Dust or something.
View detail