Reviews
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Size doesn't fit?
I don't know if the size is Large or if the meter is bad, but it keeps floating away, so there are always air bubbles in it. It is better than nothing. View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 1000
Even if Size is past Limit….
The film is hard and fits in the MeterSize Limit. I managed to install the film, but after washing the car, the film started to float when I blew off the water droplets with a compressor.
I stuck it again, but I am not sure about its durability. Is the size still not right?
View detail
Fits: SUZUKI Hayabusa
To prevent scratches
Like the Smartphone, I bought this to prevent scratches. I found it as difficult to apply as smoked film on a car. Of course it is effective, but I would like to know how to apply it easily and beautifully. View detail
Fits: KAWASAKI H2 SX SE, KAWASAKI H2 SX, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000GX
It's not cost effective
It is an old type that is difficult to put up for the price, and you have to pour water on it to remove the air. It is hard to see in the picture, but a lot of air remained. View detail
Fits: HONDA SUPER CUB C125
Spherical Panel support?
The first one was a failure, it was full of wrinkles and I threw it away immediately. the second one I pressed down slowly and radially from the Center positioning, but the air bubbles remained hard to see. It was more difficult than with a smartphone. I thought about peeling it off, but it was a waste, so I left it as it was. Would it be better to stick it with soapy water? View detail
Fits: SUZUKI Hayabusa
Meter panel
The product requires the same level of skill as a PRO to affix, and even a slight breeze when working outdoors can cause dust to stick to the adhesive and create air bubbles. View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Construction is easy.
originally [Color] By applying the film, the clear screen will look like frosted glass.
It is my personal preference, but I thought it would be more Refreshing to cut out the Protection film from the phone.
View detail
Fits: HONDA NC750S, HONDA NC750X, HONDA Integra
Difficult to apply without air bubbles.
It is difficult to position the meter and to apply it well without air bubbles.:1pc. Fail and waste anymoreQuantity:1pc. was somewhat Gapped but not after, so the position was compromised. Considering that, this pricing is not very satisfactory. it might be enough to cut out and make it on the Universal Protective Seat with my own pattern paper. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
I want to get it right...
Since the film is flimsy, it easily deforms and bubbles can form in the area.
Also, the film on the main panel is slightly large, so the edges are inevitably raised.
A glare film is included, but this is not recommended for safety reasons as it makes it difficult to see the Meter.
It is a little better to buy a cheap Film from Amazon (Side Panel Film is Large here...).
View detail
Fits: SUZUKI V-Strom 250, SUZUKI GSX250R
I wonder if it's a problem with the "Skills"...?
Products are available in unglazed and glazed quantities:1 Set of 2pcs. One is a VERSION in 6 languages, and it describes how to dry install, but I tried but could not remove air bubbles. I tried but could not remove the air bubbles.:The 1pc. instruction manual English VersionVERSION had a translation (enter here for Wet installation instructions) at the bottom of the first page on the back. I thought, "This way! I tried spraying a very small amount of neutral detergent in the water, but again, I could not get rid of the air bubbles. Moreover, the adhesive strength seemed to have weakened. I read that the air bubbles would naturally disappear after a few days, but after a few days, I went for a run. (Temperature 20°C, distance 150 km) I couldn't even get any sign of the bubbles going away at all. Is this a problem with Skills? View detail
Fits: Others
Waterproof Cap
I am satisfied with the Socket itself, but the size of the attached waterproof cap is smaller than the body, so I could not use it. View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
Subtle!
The product is [Color] There are two sheets in the package, one clear and one matte type, and I put it on expecting the matte type. As a result, since it is matte, it does not reflect the sun light, but it is white and cloudy and I cannot see well! I peeled it off and put on Clear type. As for me, I don't want to use the matte type, so I would prefer two clear types. View detail
Fits: HONDA SUPER CUB C125
I can't get it to stick.
I can't get in properly.Quantity:1pc. failed. 2pc. failed. View detail
Fits: HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR500R, HONDA CBR650R
Film texture is very nice.
The matte texture makes it easy to see the Panel, but within a month, it peeled off from the edges. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
Hard to put up, unlike a phone!
It is a feeling of the protection film of the age of GALAKAY, and it is extremely difficult to stick it beautifully.
I think it's deadly when dust gets in!
View detail
Fits: KAWASAKI Z900, KAWASAKI Z650, KAWASAKI Z400
Recommendation.
I failed.
I wanted Antiglare.
View detail
Fits: HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR500R, HONDA CBR650R
mistake
I was planning to buy another Manufacturer's item, but they didn't have it in stock, so I chose this one for immediate delivery But when I installed it, I found out that Quantity:Pair (for Left and Right) And also Film floats I thought that the degreasing had failed and started again from the first degreasing and used the attached Quantity:I tried 1pc. and it still floats I don't think it's going to come off, but I was surprised to see this much for this Gold amount I thought it was a very disappointing product View detail
Fits: BMW K1600GTLE, BMW K1600GTL, BMW K1600GT, BMW K1600GRAND AMERICA, BMW K1600B
It's not suitable for the K1600 series
Maybe it's because the center of the glass surface of K1600GTL is slightly raised, or maybe it's because the center of the glass surface of K1600GTL is slightly raised twice I tried, but I couldn't get it to stick nicely I think that the meter with a flat glass surface will be able to apply it well 。 View detail
Fits: YAMAHA Tracer 900 GT, YAMAHA R1M, YAMAHA R1, YAMAHA MT10SP, YAMAHA MT-10
The first layer of TopProtection came off after about a month
Installation is different from the description, although the Support Film comes with a Support Film like the protective film on your phone I don't feel it's easy to paste There will be some gaps on the other side It might bother some people I think visibility is good
Here's the problem
After about a month, TopProtection came off and it was hard to see the meter It rained during the daytime in the outdoor parking lot of my office, and the whole surface became cracked at night When I touched it as moisture, Film came off in pieces It looks like aged deterioration I washed the car with Car Shampoo once and it was never wet again
At home, I park with a Motorcycle Cover I don't cover it every day because I ride to work I think the costumer is not worth it, too. 1 month of reupholstering & times; 2 sheets for 3, Less than $1000 Visibility is not a problem, but my overall rating goes up, so I gave it 2 stars There is no reply from webike when I inquired about quality issues
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI Ninja1000
Difficult to paste depending on the shape of Meter
NINJA1000 (17-) I tried it with.
Tachometer was able to paste cleanly, but both SIDE Panel can not be pasted neatly. Because Meter is slightly curved, the edges will float even if you paste it.
It is the same as the protection Film of the smartphone, but it can be pasted neatly to the Flat Meter completely, but it is difficult to paste it on the curved Meter.
I use the same Meter panel
NINJA 250 / 400 ('18-)
NINJA 650 ('17-)
Ninja1000 ('17-)
Versys-X 250 ('17-)
Then it will become for the photograph.
View detail