Reviews
Many SR riders use it! (p∀p) aha!
[How is it used?
I wanted to put something Iconic on my car, so I decided to use it.
Was the one you received as per Image?
I believe I received the exact image of the product.
The inside of the lid has a tight Rubber so I thought the waterproof property was also good.
Was the installation difficult?
I think it depends on the installation location, but it was not difficult because I just crimped it into the available hole.
More than that - I was worried about the Logo to put inside, mainly because of the angle!
How was your experience with it?
Once attached, it does not bother me. The place where it is attached is not visible when riding, and it is completely self-satisfying.
[Included Parts:were they on?
No, it would be better not to add "Included Parts:" to increase the price.
[Was there anything that disappointed you?
None 。
It is a good Manufacturer that also offers Logo that fits the size.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Before purchasing or installing the product, it is recommended to test the product on a piece of paper, etc., against the part of the car body where you plan to install it to see how it will look, so that you will not make any mistakes.
View detail
Looks great!
When riding in the rear seat, I felt that the Belt alone would not support my body, and I also wanted to customize the look.
I haven't actually put a person in the Rear seat, so I don't know for sure how stiff it is or how it feels, but when I leaned on it myself, I thought it was sufficient for my needs, so I'm giving it one star.
Design and appearance are still cool.
View detail
Repeater
I replaced the old one with an aging one, and I put it where it didn't belong. View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883R
Arrangement doubles the charm! Don't you agree?
It is the same Vertical type Seat as the Single Seat I am using now, and I love the design!
I am sure that a little more Arrangement will also improve the Parenthesis even more.
View detail
Fits: KAWASAKI VULCAN400 CLASSIC, KAWASAKI ESTRELLARS, KAWASAKI VULCAN400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA VIRAGO250, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100Classic, YAMAHA TW225/E, YAMAHA DRAGSTAR1100, YAMAHA TW200/E, YAMAHA SR400/500, SUZUKI GRASS TRACKER BIGBOY, SUZUKI GRASS TRACKER, SUZUKI INTRUDER400Classic, KAWASAKI ESTRELLA, KAWASAKI W650, KAWASAKI W400, HONDA MAGNA50, KAWASAKI 250TR
It was defective.
After installation, the Fuse jumped when I checked the operation. I checked and found that the Bolt of the Blinker's Wiring Fix had contacted the Earth of the Horn and was shorted. I did not expect high quality because of the low price, but if you are going to sell them under the GarageT&F brand, you should at least check the operation of all of them before shipping, etc. I was disappointed when I installed it after processing and repairing it. View detail
Fits: YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100
Xvs1100 seat ,excwllent
Quick ish delivery, very good seat made well and fits perfect makes my bike look even better . Came well package and sealed with instruction, I will be ordering foe more in the future View detail
Brilliant, quick delivery
Fast order quick delivery , top quality product I have made another order already . I've ordered a seat for my bike and currently look to purchase other parts ,very good View detail
American's classic Cobra Seat
We replaced the OEM Seat with American's standard Cobra Seat.
The look and feel has changed considerably.
The combination of Tuck roll and Studs is the best Parenthesis.
It is much slimmer and sharper than OEMSeat.
The softness of OEMSeat is lost, but Parenthesis is superior to it.
The seating position is also more forward than OEM.
It is not possible to shift the buttocks back a little like the OEMSeat, but the buttocks are just snapped into place.
I haven't run long distances yet, but I haven't noticed any of the buttock pain that I often see in reviews of Cobra Seats.
Installation was incredibly easy and took about 10 minutes.
View detail
Fits: YAMAHA Virago 250 (XV250), その他 (22.2 mm handle), YAMAHA Dragster 250, YAMAHA Virago 250 (XV250), YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, YAMAHA SR500, HONDA Magna 50, HONDA FTR223, HONDA GB250 Clubman, KAWASAKI W400, KAWASAKI W650, KAWASAKI Estrella., KAWASAKI Estrella RS, KAWASAKI 250TR, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, YAMAHA SR400, その他 (22.2 mm handle)
Grip is consumable.
This time, I bought the Grip I use for SR because it was getting old. I thought about the Grip again (laugh).
What is ☆Grip in the first place?
It is located at both ends of the Handlebar and is directly connected to the Throttle.
☆ What is your role?
Motorcycles transmit road conditions and body vibrations from the Handlebar, but vibrations and shocks can easily cause fatigue. Therefore, Grip works to absorb such shocks and vibrations.
☆ From what perspective should Grip be chosen?
Various materials are used for grips, such as gold, hard rubber, and soft sponge rubber. What is the best material among them?
→ As a matter of fact, which one will fit you will vary widely depending on your individual preferences and the Situation you use.
☆Situation and example
Harley-Davidson's custom machine→Sponge rubber has excellent shock absorption properties and is used for example in the case (SR and single cylinder are also used here).
◎for Race→ thin and easy to grasp the road surface and tire conditions. Therefore, it tends to be favored by people who enjoy riding. A typical example is the Grip, which was used in Yamaha's production Racer TZ250 on an OEM basis.
◎Touring use→ The thicker the better, the easier it is to reduce fatigue in accelerator operation.
The thicker the Demerit→, the more difficult it is to transmit information from the road surface and tires, and the smaller the hand, the more difficult it is for a small person or woman to operate the lever. The thicker the accelerator operation is, the more it can respond to a large amount of movement, so it cannot be said that the thicker the grip is, the better. 。
This is all a story of difference, so I think it is at least a matter of not interfering with the Lever operation and preference.
This one, which can be called the barrel type Type, was replaced this time.
Why did you choose this one?
→Touring Main to reduce vibration, Style was the deciding factor (lol) and price.
good point
● It is thicker, so it absorbs vibration. Because the vibration of SR without →Balancer is great (laughs).
● Soft and easy to grip. →Durability will be low.
Analog atmosphere suits the car body.
A bad point
The thickness of the Accelerator makes it difficult to perform precise Accelerator operations.
● Because it is held forcefully, it is soft and easily progressively wears out. 2 years may not be enough (laughs).
How to exchange ■ ■
(1) Remove the existing Grip.
Existing grips are generally removed using a slotted screwdriver and parts cleaner.
(2) Clean the Handlebar.
Old glue remains on the handlebar after removing the existing grips 。 Use parts cleaner or a spatula to remove the adhesive and clean the Handlebar.
Before installing the new grips, apply Grip Bond to the handlebar. 。 If too much is applied, the bond will stick out when the grips are inserted, and it is a hassle to clean it up, so apply a thin coat. 。 It is necessary to allow the Grip Bond to cure overnight.
Point to note:When removing the grip, do not damage the throttle cone with a slotted screwdriver + remove the old adhesive firmly (the adhesion of the new grip will deteriorate).
Grips are considered to be consumable parts and not permanently usable parts, so if you continue to drive for a long time, you will probably have to replace them at some point (laugh).
View detail
Fits: YAMAHA Dragster 400 Classic, YAMAHA Dragster 400
Sturdy enough to handle angle adjustment
It seems to be a Universal product and is an excellent product with high strength and cosmetics.
It is also ideal for self customization.
View detail
Fitting is also good
I used to install the Blinker using the hole in the Seat Bracket for Side Cover because I use Posh's Blinker kit, but I chose this product because it was a type that can be installed on the Side Cover. The Blinker can be re-installed in the same position. The footing is better than the OEM Seat and it does not slip anymore. View detail
Stud bolt is short
Stud bolt was too short and I was not comfortable with the installation.
If we tightened them down firmly, they would have more usable length than they appeared, but I still felt uneasy about them.
Is it not supposed to be installed in Damperetc.OEM condition?
There is no such explanation at all, though.
I've dumped my Gold down the drain.
I was also annoyed by the ”Triple tree” in the Instruction Manual.
View detail
Fits: HARLEY-DAVIDSON DYNA WIDE GLIDE, HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM
Recommended
Inexpensive and recommended!
The footing has also improved!
View detail
I think this is the only 250TR Seat that is waterproof.
I had been using a different external Seat for my 250TR, but since I also use it for commuting, I wanted to replace it with a Seat that is waterproof.
Until now, if I got wet in the rain with the Tuck Roll Seat, the Seat would not dry out for over a week and my butt would get wet every time I rode.
This time we decided against Tuck roll and chose this Seat with WaterproofFilm.
I asked around to see if other companies' Seats on Yahoo! Auctions had waterproof treatment, but none of them had waterproof Seats, so I finally found this product.
As you can see in the picture, I tried it out, I sprayed water on it with a Sprinkling can, wiped the water off the epidermis, and then laid the Tissue down and sat on it, and it did not get wet at all!
I am impressed!
Now I can escape from wet buttocks on my commute to work.
The comfort is just right, with just the right amount of firmness.
I have not tried long distance driving yet, so I am only worried about my buttocks getting sore, but the waterproof treatment is a Large thing for me, so I will use it for Large things.
View detail
It is easy to install.
Since we decided to use a short fender, it was necessary to relocate the number, so we installed it.
Installation is easier than KIJIMA's because it is co-tightened with the rear shock.
Before and after Quantity:Pair (for Left and Right) The adjustable range of the "L" and "H" allows you to fix it at your desired position.
View detail
Solder failure
Blinker signal line Solder defective
Since it was purchased new, I assumed there were no initial defects, so I removed the tank and inspected the wiring extensively.
I'd really like to charge the actual cost.
View detail
Fits: KAWASAKI 250TR, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLARSCustom, KAWASAKI Eliminator, KAWASAKI Eliminator, KAWASAKI ELIMINATOR 250LX, KAWASAKI ELIMINATOR 250LX, KAWASAKI ELIMINATOR 250LX, KAWASAKI ELIMINATOR 250LX, KAWASAKI ELIMINATOR 250SE, KAWASAKI ELIMINATOR 250SE, KAWASAKI ELIMINATOR 250SE, KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W800Special edition
It's almost same as genuine parts
I used to buy the genuine parts of Kawasaki but I don't see any diffrences on this brake shoe between the genuine and OEM. To sum up, the performance is ok and I will buy it again if any chance in the future. View detail
Equipped on SR500
I put it on anyway.
Wiring does not fit into the light case, so some ingenuity is required.
View detail
So bad
Brake lever adjustment dial is as good as none, almost no change.
Was it defective?
The fit check was fine, but the product was disappointing.
Is it unburnable Garbage because it has passed the return deadline.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
A bit of a shame …
The bolt length in the Instruction Manual was different by 5mm from the bolt that came with the product, and could not be installed.
It was a hassle to return or ship it back, so I bought Bolt again at Homsen,
Other than that, it was good, so 2 stars.
View detail