Reviews
It is easy to install.
Since we decided to use a short fender, it was necessary to relocate the number, so we installed it.
Installation is easier than KIJIMA's because it is co-tightened with the rear shock.
Before and after Quantity:Pair (for Left and Right) The adjustable range of the "L" and "H" allows you to fix it at your desired position.
View detail
Solder failure
Blinker signal line Solder defective
Since it was purchased new, I assumed there were no initial defects, so I removed the tank and inspected the wiring extensively.
I'd really like to charge the actual cost.
View detail
Equipped on SR500
I put it on anyway.
Wiring does not fit into the light case, so some ingenuity is required.
View detail
Screw has been cut off!
I was able to install it with no problems, but it was running,
The Screw for mounting the License Plate stand broke off in the middle.
View detail
Fits: SUZUKI glass tracker, SUZUKI glass tracker
(very) satisfied
Lens is painted in yellow color, but the brightness is neither good nor bad! View detail
Fits: YAMAHA SR400, YAMAHA SR400
Cool, but a little small.
When I bought my SR, I always planned to install ROCKETHeadlight, so I bought it before delivery and left it at the Motorcycle shop.
The installation was quite Large strange, and it seems that when changing from Normal light, the Normal Headlight Bracket had to be removed … the Front fork had to be removed, etc., etc., which made it Large strange.
I am very happy with the design and texture, but I think 4.5-inches is too small. I would like to change to 5.7-inches next time.
View detail
Fits: YAMAHA Dragster 400, YAMAHA Dragster 400
Looks good!
I wanted to make it Stylish Light.
It is much slimmer and looks better than the one I used to wear.
Not too long, not too short, just the right size for my motorcycle and a good design.
I am concerned about the brightness of the Light at night since it is 4Inch, but I would like to check it at night when spring comes. I may replace it with a brighter Halogen.
Installation varies from person to person, but it was easy for me.
Overall, I am satisfied.
View detail
Fits: YAMAHA DRAGSTAR400(Later model 5KP) DRAGSTAR400 CLASSIC(Later model 5KP)
It is easy to install.
I bought it because I had to change my Speedometer from electric to mechanical due to the age of the tank.
At first, I thought it would be a painstaking process, but the Instruction Manual was easy to understand, so it was much easier than I expected.
Grease was not included, so you may want to have it ready.
View detail
Fits: YAMAHA Dragster 400 Classic, YAMAHA Dragster 400, YAMAHA Dragster 400 Classic, YAMAHA Dragster 400
It is a good product, just as I expected.
It is a good product, just as I expected, and the length was perfect.
The rest is durability, but considering the price, I am satisfied.
View detail
Recommended!
Very American and very nice!
Highly recommended at a reasonable price.
View detail
It arrived beautifully without Wound.
Blinker does not have Minus Wiring, and it is cumbersome to install the supplied MinusWiring with Bullet Terminal. View detail
I like it
It is a common Bracket, but I liked the color Black.
I wanted to put a Black Blinker in Black's place.
I don't know if I would call it custom level, but I was very satisfied with it.
I am satisfied with the price.
I hope the paint will hold up well as I use it.
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
It doesn't work
It is xv250, but you will need a further extension cord to use this.
VIRAGO250 requires a length of about 95mm, which, if you look closely, is listed as 700mm 。 More than 200mm short. 。 I am sure the Shop is not at fault because I made a mistake in checking the length, but if you believe it and cut the seal, returns will not be accepted, so I suggest that you always check the length before ordering.
View detail
Garage T&F Garage T&F 4.5-inch Bates Headlight
The paint and construction are beautiful and of good quality for the price. View detail
Small size.
Installed on DS400.
Black painting has a subdued sheen and looks good in synergy with the small appearance.
View detail
In reserve
Good to keep in stock as a spare.
The price is low, so you can be assured that Stock is available even in the event of a sudden trouble due to Valve running out.
Brightness and quality are the same as Normal valve.
View detail
For the License Plate Light when the Fender Eliminator is used.
Very Small, Stylish, and Refreshing in appearance.
Installation is easy, as it is simply affixed with double-sided tape.
The light was bright enough for a License light.
View detail
It's solid.
We decided to replace the 3-pole and 9-pole coupler on the Speedometer side, which had deteriorated significantly over time. Since I did not touch the body side, I purchased only the female coupler without the terminals, so I also purchased these terminals. All you need is 1Quantity:2pc. I had only a set, but I thought I didn't need a lot of it, since the price was so high for a small number of items, but it was a good value for money.:I chose this one with 1 Set of 100pcs.
As for the product, although some of the bends were not so good, it was firm with appropriate thickness, and it fit into the coupler tightly.
There are still quite a few of them left, but the 110 coupler is used in various places, and there may be times when you want to modify it, so if you have it, it will come in handy sooner or later.
View detail
Not bad at all
I was looking forward to get some quality terminals .so I finally found it . thickness of the female terminals are very normal compare to the male terminals .overall product is good this spade terminal connectors are damn good .quality is superb .no need to crimping so hard .highly recommended. value for the money. View detail
Quantity:Pair (for Left and Right) It's a single product, not two, it can't be...
This product is not listed on the product Page, but this product is Quantity:Pair (for Left and Right) The price is for one piece only, not a whole lot more.
Please be careful when purchasing.
View detail