Reviews
It is easy to install.
Since we decided to use a short fender, it was necessary to relocate the number, so we installed it.
Installation is easier than KIJIMA's because it is co-tightened with the rear shock.
Before and after Quantity:Pair (for Left and Right) The adjustable range of the "L" and "H" allows you to fix it at your desired position.
View detail
Fits: YAMAHA Dragster 400, YAMAHA Dragster 400
Looks good!
I wanted to make it Stylish Light.
It is much slimmer and looks better than the one I used to wear.
Not too long, not too short, just the right size for my motorcycle and a good design.
I am concerned about the brightness of the Light at night since it is 4Inch, but I would like to check it at night when spring comes. I may replace it with a brighter Halogen.
Installation varies from person to person, but it was easy for me.
Overall, I am satisfied.
View detail
Fits: YAMAHA DRAGSTAR400(Later model 5KP) DRAGSTAR400 CLASSIC(Later model 5KP)
It is easy to install.
I bought it because I had to change my Speedometer from electric to mechanical due to the age of the tank.
At first, I thought it would be a painstaking process, but the Instruction Manual was easy to understand, so it was much easier than I expected.
Grease was not included, so you may want to have it ready.
View detail
Fits: YAMAHA Dragster 400 Classic, YAMAHA Dragster 400, YAMAHA Dragster 400 Classic, YAMAHA Dragster 400
It is a good product, just as I expected.
It is a good product, just as I expected, and the length was perfect.
The rest is durability, but considering the price, I am satisfied.
View detail
Recommended!
Very American and very nice!
Highly recommended at a reasonable price.
View detail
I like it
It is a common Bracket, but I liked the color Black.
I wanted to put a Black Blinker in Black's place.
I don't know if I would call it custom level, but I was very satisfied with it.
I am satisfied with the price.
I hope the paint will hold up well as I use it.
View detail
Garage T&F Garage T&F 4.5-inch Bates Headlight
The paint and construction are beautiful and of good quality for the price. View detail
Small size.
Installed on DS400.
Black painting has a subdued sheen and looks good in synergy with the small appearance.
View detail
In reserve
Good to keep in stock as a spare.
The price is low, so you can be assured that Stock is available even in the event of a sudden trouble due to Valve running out.
Brightness and quality are the same as Normal valve.
View detail
For the License Plate Light when the Fender Eliminator is used.
Very Small, Stylish, and Refreshing in appearance.
Installation is easy, as it is simply affixed with double-sided tape.
The light was bright enough for a License light.
View detail
Fits: YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic
Light Installation
Today I asked the motorcycle shop to install the 4.5-inches Rocket Light that I purchased. I was not satisfied with the NORMAL light because it made the whole motorcycle look rounder and a little less American, but when I installed it this time, it made the whole motorcycle look slimmer and more American, and I was satisfied with the Large light!
I switched to an additional LED bulb, which makes me even happier!
Next time I want to change the Handlebar, I'll look for it again.
View detail
Fits: YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100Classic
Looks American to me!
Today I asked a motorcycle shop to install the Blinker kit that I purchased. The NORMAL version of the motorcycle was a little round and a little less American, so I wasn't satisfied with it.
Next time I want to change the Handlebar, I'll look for it again.
View detail
Fits: SUZUKI glass tracker, SUZUKI glass tracker
Ime-Chain is ready.
It was easy to install, I bought a new LED Bulb because the depth inside the Light is almost non-existent, if you are going to install it on a GRASS TRACKER, it will take some time to do the wiring process. View detail
Satisfied with Cospa
There are quite a few bad reviews, but I've been able to use my product without any problems.
I've been using it for a year and a half on a RigidXL1200C SPORTSTER 1200 with a lot of vibration, and it's been in service without breaking.
View detail
Fits: YAMAHA Dragster 250, YAMAHA Dragster 250
It was smaller than I expected.
But the whole thing is tighter and better.
I really wanted to replace the Light with an LED, but it doesn't seem to go in. So I give it 4 stars.
Still, I'm happy with it.
View detail
Fits: YAMAHA Dragster 1100, YAMAHA Dragster 1100
Nice Rocket light for bobber style
I purchased this rocket light for my customised Steed 400. I decided to transform it to the bobber style so this light looks perfect for the project. I dont have any problem while installing because it make for Steed with the bracket along. The quality of plating is perfect, the light is bright in night driving. Thanks. View detail
Fits: KAWASAKI ESTRELLARS, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA CUSTOM
Easy Bolt On for a more antique look!
Steel with Black Finishing so it looks good and it is easy to Mountable to the bolt. so it's great
When replacing NORMAL, I recommend making Wiring look good together
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
Was good
Purchased to install a voltmeter on my VIRAGO 250 The shape and mounting points are satisfactory The shape and mounting points are satisfactory, but it would have been better if there was a plating as well, as it is only available in black View detail
Fits: YAMAHA Dragster 250, YAMAHA Dragster 250
Exclusive Bracket fits the bill
I bought a headlight bracket for my DRAGSTAR 250 and it is specially designed for and the mounting Screw width is perfect It can be used either up or down, which was more convenient View detail
I think this amount is cheap
I bought it to make a can Seraa for the Clutch switch
There are other small type terminals that are unique to the motorcycle, so it may be worthwhile to use them And, it's great that Astro and other tool stores don't have any
View detail