Reviews
Fits: YAMAHA SR400, YAMAHA SR400
Cool, but a little small.
When I bought my SR, I always planned to install ROCKETHeadlight, so I bought it before delivery and left it at the Motorcycle shop.
The installation was quite Large strange, and it seems that when changing from Normal light, the Normal Headlight Bracket had to be removed … the Front fork had to be removed, etc., etc., which made it Large strange.
I am very happy with the design and texture, but I think 4.5-inches is too small. I would like to change to 5.7-inches next time.
View detail
It's solid.
We decided to replace the 3-pole and 9-pole coupler on the Speedometer side, which had deteriorated significantly over time. Since I did not touch the body side, I purchased only the female coupler without the terminals, so I also purchased these terminals. All you need is 1Quantity:2pc. I had only a set, but I thought I didn't need a lot of it, since the price was so high for a small number of items, but it was a good value for money.:I chose this one with 1 Set of 100pcs.
As for the product, although some of the bends were not so good, it was firm with appropriate thickness, and it fit into the coupler tightly.
There are still quite a few of them left, but the 110 coupler is used in various places, and there may be times when you want to modify it, so if you have it, it will come in handy sooner or later.
View detail
Be careful of overtightening
I bought it to install DAYTONA's Tachometer to ELIMINATOR 250V. Inch handle Bracket is currently out of print DAYTONA, so here. Because it is a Universal Bracket, Meter will shake, but if you tighten it too fast it will be hard for Bolt to bend and remove it, so be careful when tightening. View detail
I have to work while confirming without worrying about manuals
Price and appearance were as expected as expected.
It was uneasy because the number of usable Meter φ is unknown.
It is Size that can be used with DAYTONA 60φ.
Red - Green - There was Yellow color Lamp, except for Yellow color was opposite to Instruction Manual.
It took me some time to rewiring it again, but now I can use it.
"There are cases where there is a case reverse to the manual depending on the lot" It was written, but with the normal one
Because the opposite thing is mixed, the person who is purchased from now is Plus - Minus
Even just check it and you should do installation.
View detail
A huge design as expected
I bought this relatively cheap item at the same time as Yellow Lens looking for Headlight of BirdGauge
Headlight with Rim of BirdGauge and 5. Since the Rim of NORMALBates light of 75-inches is attached
Single Item selling BirdGaugeRim + company made 5. It is a set item of 75Headlight
I got the product made of sand mold for the first time
Although the processing of BALI is sweet, I like Vintage atmosphere very much and I like it very much
As I said, Yellow Lens was also purchased together so I tried to disassemble it as soon as possible
Parts Structure was as follows
- Light body
- Harness
- High beamValve
- Light valve
O-ring*2
- Reflector
- Lens
- Light rim
- LightRim Band
- BirdGauge
There are quite a number of parts, I think that it will be a hard time when exchanging with valves etc.
Also, due to the structure of Rim for installing BirdGauge, it is very difficult to adjust the orientation of Reflector
(Reflector and Lens rotate independently during installation)
Because the structure is complicated and cumbersome, it is ☆ -1
Also, although there is a Lens cut when it is an image of the product, the item received did not have Cut in Lens, it was Multi - reflector. (Because it was different from the explanation ☆ -1)
There are points to worry about, but I do not know by looking at it and BirdGauge itself is rare so if you are interested please
View detail