Reviews
I think this amount is cheap
I bought it to make a can Seraa for the Clutch switch
There are other small type terminals that are unique to the motorcycle, so it may be worthwhile to use them And
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
So so
It looks nice, but a bit expensive
I was with instructions for once.
I think that it is possible to do with the same amount of gold even if it makes it properly at Home center with Bracket or Angle.
View detail
Be careful of overtightening
I bought it to install DAYTONA's Tachometer to ELIMINATOR 250V. Inch handle Bracket is currently out of print DAYTONA, so here. Because it is a Universal Bracket, Meter will shake, but if you tighten it too fast it will be hard for Bolt to bend and remove it, so be careful when tightening. View detail
I have to work while confirming without worrying about manuals
Price and appearance were as expected as expected.
It was uneasy because the number of usable Meter φ is unknown.
It is Size that can be used with DAYTONA 60φ.
Red - Green - There was Yellow color Lamp, except for Yellow color was opposite to Instruction Manual.
It took me some time to rewiring it again, but now I can use it.
"There are cases where there is a case reverse to the manual depending on the lot" It was written, but with the normal one
Because the opposite thing is mixed, the person who is purchased from now is Plus - Minus
Even just check it and you should do installation.
View detail
Fits: SUZUKI glass tracker, SUZUKI glass tracker
When !!!
The car body tightens firmly with Small grain.
Plating is also solid, there is no floating.
I think Quality is suitable for the price.
However, it's hot !!
When !!!
Small, but it can not be helped, it is really bad !!
LED replacement recommended.
When Housing lights up with oil,
Because there is a possibility that it will probably get burned,
Even if it is troublesome, it may be necessary to wipe up frequently.
View detail
Fits: HONDA Shadow Slasher 400, HONDA Shadow Slasher 400
Stylish appearance and satisfied
I like items themselves. However, it is difficult to understand because the photograph of the installation explanation is hard to see with WhiteBlack. I like the style after installation! View detail
GARAGE T&F Bottom Mounting Blinker Bracket
Easy to install, looks good with my micro blinkers and of really high quality for the price. Highly recommended for a sleek look for your bike. View detail
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA
Very very beautiful, they came very quickly, and in good packaging. The quality is top, the finish is perfect, and included all the necessary components for mounting. They are heavy, simple construction, and very strong, from metal. I am very happy for bo
Very very beautiful, they came very quickly, and in good packaging. The quality is top, the finish is perfect, and included all the necessary components for mounting. They are heavy, simple construction, and very strong, from metal. I am very happy for bought them, i strongly recommend them. Also in this color does not exist anywhere else.Unique. View detail
Fits: KAWASAKI 250TR
It was better than imagined..
Purchased for installation on 250TR. I have not installed yet, but it was better than I expected the accuracy of the product itself. BirdGaugeType is pretty rare, so I will purchase again if I have the opportunity. View detail
Low Quality
Buy Ring Type that was previously in DAYTONA out of print.
But anyway the quality is poor, fixation of LEDCase and Wiring is graze on adhesive glue, abrasive is mixed in Screw hole of Ring, it does not run smoothly as it bite the thread, the Lens of Green Light is full of Wound (I do not know if I do not let it light up) Quality is not a talk in.
Because LEDCase and Wiring are full of gaps, Waterproof nature is not as bad as
Recommendation It is not a product that can be done.
View detail
Fits: HONDA Steed 400, HONDA Steed 400, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 400
It is very high.
It is very high. When I got it I was inside a wrapped in PetitPetit which was not even Zing Zing.
The contents are Wiring, Coupler, Bracket Only and Bracket seems to be Aluminum Cut-out but I think it does not fit the price. It's a good shape, but that's too bad.
If you bought Aluminum Pipe at Homsen like this and can not make it if you strike Tap, can not you make it?. Level's products (Lol)
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
Easy to install
With this, you can easily move Meter out. It's really easy to install and you can also do anything with a manual as well. Afterwards it is done just by tapping Meter's Wiring a little.
It is recommended because the look around Handlebar looks neat.
View detail
A huge design as expected
I bought this relatively cheap item at the same time as Yellow Lens looking for Headlight of BirdGauge
Headlight with Rim of BirdGauge and 5. Since the Rim of NORMALBates light of 75-inches is attached
Single Item selling BirdGaugeRim + company made 5. It is a set item of 75Headlight
I got the product made of sand mold for the first time
Although the processing of BALI is sweet, I like Vintage atmosphere very much and I like it very much
As I said, Yellow Lens was also purchased together so I tried to disassemble it as soon as possible
Parts Structure was as follows
- Light body
- Harness
- High beamValve
- Light valve
O-ring*2
- Reflector
- Lens
- Light rim
- LightRim Band
- BirdGauge
There are quite a number of parts, I think that it will be a hard time when exchanging with valves etc.
Also, due to the structure of Rim for installing BirdGauge, it is very difficult to adjust the orientation of Reflector
(Reflector and Lens rotate independently during installation)
Because the structure is complicated and cumbersome, it is ☆ -1
Also, although there is a Lens cut when it is an image of the product, the item received did not have Cut in Lens, it was Multi - reflector. (Because it was different from the explanation ☆ -1)
There are points to worry about, but I do not know by looking at it and BirdGauge itself is rare so if you are interested please
View detail
before you could say Jack Robinson…
Plating type thought that rust was conspicuous and ordered to replace it with Black's paint type, but the attached Bolt is too long to interfere, it tends to interfere with Wire etc.. And Bolt, Nut suddenly rushed red at once. There was no meaning renewed in this, and I had no choice but to return to the original Bolt, Nut.
It was useless shopping ....
View detail
Fits: KAWASAKI Estrella RS Custom, KAWASAKI Estrella Custom, KAWASAKI Estrella RS, KAWASAKI Estrella., KAWASAKI Estrella RS Custom, KAWASAKI Estrella Custom, KAWASAKI Estrella RS, KAWASAKI Estrella.
Good product for the price
I decided to buy with Bates light as cheaply as possible, I decided on this product, but it was a good product for the price.
Both making and painting were polite, and the Instruction Manual which wrote the color of Wiring for each Manufacturer was also kind.
View detail
It was a beautiful yellow color..
Since Yellow color light is an age car of OK, I made it a yellow color. Depending on the year of manufacture of the vehicle it is not good because it is not good.
At first it was Candy yellowetc. I tried painting with, but since Spray itself gets over 2,000, buy it cheaper than that. Lens itself was Yellow color so it was right to buy it without coating balding.
View detail
Received the cable after 10 days. In very good condition as expected. But the cable is only 700mm in length so I cannot use it on my SR400. It can only be used with lowered bike or a bike with aftermarket speedometer fixed below the triple-three. As a
Received the cable after 10 days. In very good condition as expected. But the cable is only 700mm in length so I cannot use it on my SR400. It can only be used with lowered bike or a bike with aftermarket speedometer fixed below the triple-three. As a result I had to order the new and original speedometer cable (880mm in length). Hassle free shopping at webike and I live in Malaysia. Will continue shopping with webike. Thanks! View detail
The paint was peeling off ...
As soon as it arrives, if you check the spot things, you found something that Garbage might have adhered, and when you casually touched it was a paint stripping ...
Because the paint itself was Beauty, it may have been defatted insufficient just before painting there ... I painted it with oily Magic and made it fake (Lol)
The installation was attached to DAYTONA's Speedometer. It is Φ 60. By the way, this is not exclusive to the car model. It is a Universal Product. Let's prepare Wiring diagram and Coupler etc. separately.
After mounting it was black and the shape also fell well and the matter of painting was disappointing.
View detail
Attached to SR 400 Initial Model!
I installed it in the Initial Model Disc brake SR400 vehicle.
By Custom, I bought the Speedometer next to Tank, so I was looking for a Short Type Speedometer Cable.
Since the conforming vehicle was SR400 Disc brake car,
Although there was also anxiety, it was able to fit in Initial Model vehicles without problems.
With this, the surroundings of Wiring are refreshing.
View detail
Just right Large
Because OEM's Large is quite obsolete, I replaced it with this Blinker I fell in love at first sight.
Since it was a 12v 23 w bulb, replace it with a 12 v 21 w bulb and install it.
At that time, the brittleness enough to cause the Front screw to be loosened only by opening and closing once.
I do not know if it is due to Reduction in cost, but it is regrettable.
View detail