Reviews
Many SR riders use it! (p∀p) aha!
[How is it used?
I wanted to put something Iconic on my car, so I decided to use it.
Was the one you received as per Image?
I believe I received the exact image of the product.
The inside of the lid has a tight Rubber so I thought the waterproof property was also good.
Was the installation difficult?
I think it depends on the installation location, but it was not difficult because I just crimped it into the available hole.
More than that - I was worried about the Logo to put inside, mainly because of the angle!
How was your experience with it?
Once attached, it does not bother me. The place where it is attached is not visible when riding, and it is completely self-satisfying.
[Included Parts:were they on?
No, it would be better not to add "Included Parts:" to increase the price.
[Was there anything that disappointed you?
None 。
It is a good Manufacturer that also offers Logo that fits the size.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Before purchasing or installing the product, it is recommended to test the product on a piece of paper, etc., against the part of the car body where you plan to install it to see how it will look, so that you will not make any mistakes.
View detail
Looks great!
When riding in the rear seat, I felt that the Belt alone would not support my body, and I also wanted to customize the look.
I haven't actually put a person in the Rear seat, so I don't know for sure how stiff it is or how it feels, but when I leaned on it myself, I thought it was sufficient for my needs, so I'm giving it one star.
Design and appearance are still cool.
View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883R
Arrangement doubles the charm! Don't you agree?
It is the same Vertical type Seat as the Single Seat I am using now, and I love the design!
I am sure that a little more Arrangement will also improve the Parenthesis even more.
View detail
Fits: YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100
Xvs1100 seat ,excwllent
Quick ish delivery, very good seat made well and fits perfect makes my bike look even better . Came well package and sealed with instruction, I will be ordering foe more in the future View detail
American's classic Cobra Seat
We replaced the OEM Seat with American's standard Cobra Seat.
The look and feel has changed considerably.
The combination of Tuck roll and Studs is the best Parenthesis.
It is much slimmer and sharper than OEMSeat.
The softness of OEMSeat is lost, but Parenthesis is superior to it.
The seating position is also more forward than OEM.
It is not possible to shift the buttocks back a little like the OEMSeat, but the buttocks are just snapped into place.
I haven't run long distances yet, but I haven't noticed any of the buttock pain that I often see in reviews of Cobra Seats.
Installation was incredibly easy and took about 10 minutes.
View detail
Fits: YAMAHA Dragster 400 Classic, YAMAHA Dragster 400
Sturdy enough to handle angle adjustment
It seems to be a Universal product and is an excellent product with high strength and cosmetics.
It is also ideal for self customization.
View detail
Fitting is also good
I used to install the Blinker using the hole in the Seat Bracket for Side Cover because I use Posh's Blinker kit, but I chose this product because it was a type that can be installed on the Side Cover. The Blinker can be re-installed in the same position. The footing is better than the OEM Seat and it does not slip anymore. View detail
Fits: HARLEY-DAVIDSON DYNA WIDE GLIDE, HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM
Recommended
Inexpensive and recommended!
The footing has also improved!
View detail
I think this is the only 250TR Seat that is waterproof.
I had been using a different external Seat for my 250TR, but since I also use it for commuting, I wanted to replace it with a Seat that is waterproof.
Until now, if I got wet in the rain with the Tuck Roll Seat, the Seat would not dry out for over a week and my butt would get wet every time I rode.
This time we decided against Tuck roll and chose this Seat with WaterproofFilm.
I asked around to see if other companies' Seats on Yahoo! Auctions had waterproof treatment, but none of them had waterproof Seats, so I finally found this product.
As you can see in the picture, I tried it out, I sprayed water on it with a Sprinkling can, wiped the water off the epidermis, and then laid the Tissue down and sat on it, and it did not get wet at all!
I am impressed!
Now I can escape from wet buttocks on my commute to work.
The comfort is just right, with just the right amount of firmness.
I have not tried long distance driving yet, so I am only worried about my buttocks getting sore, but the waterproof treatment is a Large thing for me, so I will use it for Large things.
View detail
Stiffer than OEM
It is stiffer than OEM.
Touring about 300 km is not a problem, but it may be hard if it is more than that.
It looks good and the price is more reasonable than other brands, so I think it is worth buying.
View detail
Custom seat
Compared to OEMs, the seating comfort is,
However, Parenthesis is by far the best looking.
I highly recommend it!
The process is simple and anyone can do it!
View detail
W650 going Bratstyle
Looks great, easy to put on, but left a 15mm gap where it didn't touch the rear frame hoop. I took off the 4 rubber bumpers and removed the spacer that came with the seat (to go under the lock posts?) I also took off the lock mechanism on the frame to remove the 2 slim washers underneath. This brought the gap at the rear down to 7mm - much better! Overall, a slim, tuck and roll seat for little money. Very pleased. View detail
Seat replacement after much agonizing
I was riding Yamaha Bolt R-Spec with Normal seat and Gel pad, and I dropped the air pressure of Rear to 2.3 Kg. (at your own risk). The uneven road surface vibrations are transmitted to the buttocks,
Soft and fluffy Seat (Overseas products) or Spring Seat (OEM or overseas products) exchange to
Rear suspension replacement (YSS etc.)
I considered it, but all of them are quite expensive, and YamahaOEMSpring Seat is hard to get nowadays....
I found this Seat and purchased it because of the reasonable price and the Web!ke limited time point bonus.
Type is your own preference. Tuck roll." to
As others have mentioned in their impressions, Rear bracket Quantity:Since the 2pcs may interfere with the Rear Fender, 3mm thick Cushion material is attached (see photo).:4)
The material is also attached to the rear bracket and the two rear fender fixing points.:Aluminum 3mm Spacer (Photo):6)。
In this state, when viewed directly from the side, the Rear bracket Quantity:The 2pc and the rear part of the Seat itself are slightly floating from the Rear Fender. We do not tandem, so this condition is fine, but if you tandem, the weight of the occupant may cause the Seat itself and the rear Spacer Quantity:I think part of the 2pc will interfere with the Rear Fender, so be careful.
Seat forward center positioning adjustment is forward Bracket mounting Bolt, rear mounting position adjustment is rear Quantity:It can be done with a total of 4 screws, fixing 2pc of bracket.
After replacing the Seat, we ran a test run for about 100 km, and this is our impression,
It is narrower than the Normal seat and seems a little stiffer, but it is not uncomfortable.
I feel that the degree to which uneven road surface vibrations are transmitted to my bottom has been reduced. (Thickness? or SeatMaterial?) 。
I feel that the Position is a little forward, closer to the Handlebar.
We will go with this Seat for the time being.
I am satisfied with both performance and price.
View detail
Tuck Roll Seat
Replaced from W650 OEMSeat.
I am 154cm tall, so I was worried about my footing with the OEM Seat height, but after replacing the Seat, I was surprised to see how much better my footing was.
I'm short. "Standing gore" I thought Lowdown was the only way to solve my anxiety about the "I'm satisfied with Large", but I was able to solve my anxiety just by replacing the Seat.
The width is narrower than the OEMSeat, which allows the feet to be lowered directly down for better footing.
However, if I ride long distances, my buttocks hurt so much that I get BigLi. (Lol)
I may be limited to 30 km on the street. More than that and your buttocks will be sore.
Pain in the buttocks is not a problem if you can tolerate it.
The problem of not being able to reach my feet has nothing to do with patience or anything else. (Lol)
I am glad I bought it. It is a good Seat.
View detail
Cospa good
I chose this product out of many different Seat products!
It is inexpensive, well-made, and the most cost-effective.
It attaches without any problem.
View detail
Required for Injection Cars
Required for Injection
I think it is well made and there are no problems.
Installation is easy
View detail
Good product at a reasonable price.
I chose them based on price from a number of companies, but I am satisfied with the QUALITY, which is more than I had imagined.
Quantity:1pc. eye photo
Material:Stainless Steel Body with Rubber packing and Material:Waterproof performance cannot be guaranteed and is for reference only.
Second and third pictures
The front fork boots and Fender mounting screws were loosened, and the EmblemHolder stays were inserted into the gap between the front fork boots and Fender.
View detail
Fits: HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight
Vertical Double seat
Shipping was really fast,highly recommended. It took 4 to 5 days.The seat is very comfortable and same goes for the pillion. Would love to order more parts for my 2010 Harley Davidson XL883N,thank you! View detail
Seat just right
Since the vehicle was purchased used, I did not like the comfort of the external Seat that came with it, so I bought this product to try it out.
The design of Seat by an_bu was good, but I knew the price and the quality of the leather was weak, so it was a good decision to purchase this one, considering the possibility of reupholstering in the future.
The only hassle was that I had to buy a new one because it was an external Seat and there was no rubber.
View detail
Great seat!
I'm very happy with the quality of this seat! It was a perfect fit on my 1997 Honda Steed vlx 600. I would definitely recommend this seat to anyone! View detail