Reviews
Fits: YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100
Xvs1100 seat ,excwllent
Quick ish delivery, very good seat made well and fits perfect makes my bike look even better . Came well package and sealed with instruction, I will be ordering foe more in the future View detail
Fits: YAMAHA Dragster 400 Classic, YAMAHA Dragster 400
Sturdy enough to handle angle adjustment
It seems to be a Universal product and is an excellent product with high strength and cosmetics.
It is also ideal for self customization.
View detail
Fits: HARLEY-DAVIDSON DYNA WIDE GLIDE, HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM
Recommended
Inexpensive and recommended!
The footing has also improved!
View detail
Custom seat
Compared to OEMs, the seating comfort is,
However, Parenthesis is by far the best looking.
I highly recommend it!
The process is simple and anyone can do it!
View detail
Seat replacement after much agonizing
I was riding Yamaha Bolt R-Spec with Normal seat and Gel pad, and I dropped the air pressure of Rear to 2.3 Kg. (at your own risk). The uneven road surface vibrations are transmitted to the buttocks,
Soft and fluffy Seat (Overseas products) or Spring Seat (OEM or overseas products) exchange to
Rear suspension replacement (YSS etc.)
I considered it, but all of them are quite expensive, and YamahaOEMSpring Seat is hard to get nowadays....
I found this Seat and purchased it because of the reasonable price and the Web!ke limited time point bonus.
Type is your own preference. Tuck roll." to
As others have mentioned in their impressions, Rear bracket Quantity:Since the 2pcs may interfere with the Rear Fender, 3mm thick Cushion material is attached (see photo).:4)
The material is also attached to the rear bracket and the two rear fender fixing points.:Aluminum 3mm Spacer (Photo):6)。
In this state, when viewed directly from the side, the Rear bracket Quantity:The 2pc and the rear part of the Seat itself are slightly floating from the Rear Fender. We do not tandem, so this condition is fine, but if you tandem, the weight of the occupant may cause the Seat itself and the rear Spacer Quantity:I think part of the 2pc will interfere with the Rear Fender, so be careful.
Seat forward center positioning adjustment is forward Bracket mounting Bolt, rear mounting position adjustment is rear Quantity:It can be done with a total of 4 screws, fixing 2pc of bracket.
After replacing the Seat, we ran a test run for about 100 km, and this is our impression,
It is narrower than the Normal seat and seems a little stiffer, but it is not uncomfortable.
I feel that the degree to which uneven road surface vibrations are transmitted to my bottom has been reduced. (Thickness? or SeatMaterial?) 。
I feel that the Position is a little forward, closer to the Handlebar.
We will go with this Seat for the time being.
I am satisfied with both performance and price.
View detail
Tuck Roll Seat
Replaced from W650 OEMSeat.
I am 154cm tall, so I was worried about my footing with the OEM Seat height, but after replacing the Seat, I was surprised to see how much better my footing was.
I'm short. "Standing gore" I thought Lowdown was the only way to solve my anxiety about the "I'm satisfied with Large", but I was able to solve my anxiety just by replacing the Seat.
The width is narrower than the OEMSeat, which allows the feet to be lowered directly down for better footing.
However, if I ride long distances, my buttocks hurt so much that I get BigLi. (Lol)
I may be limited to 30 km on the street. More than that and your buttocks will be sore.
Pain in the buttocks is not a problem if you can tolerate it.
The problem of not being able to reach my feet has nothing to do with patience or anything else. (Lol)
I am glad I bought it. It is a good Seat.
View detail
Cospa good
I chose this product out of many different Seat products!
It is inexpensive, well-made, and the most cost-effective.
It attaches without any problem.
View detail
Required for Injection Cars
Required for Injection
I think it is well made and there are no problems.
Installation is easy
View detail
Fits: HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight
Vertical Double seat
Shipping was really fast,highly recommended. It took 4 to 5 days.The seat is very comfortable and same goes for the pillion. Would love to order more parts for my 2010 Harley Davidson XL883N,thank you! View detail
Seat just right
Since the vehicle was purchased used, I did not like the comfort of the external Seat that came with it, so I bought this product to try it out.
The design of Seat by an_bu was good, but I knew the price and the quality of the leather was weak, so it was a good decision to purchase this one, considering the possibility of reupholstering in the future.
The only hassle was that I had to buy a new one because it was an external Seat and there was no rubber.
View detail
Great seat!
I'm very happy with the quality of this seat! It was a perfect fit on my 1997 Honda Steed vlx 600. I would definitely recommend this seat to anyone! View detail
If you want to enjoy the feeling of Cafe racer with SR400.
I bought a used SR400 with a separate handle, rear sets, and an external double seat, and I immediately changed to this single seat because the double seat on the separate handle made my posture very hard.
The seat is harder than the double seat, but it is much easier to drive!
The price is a little high, but I personally think it is better than buying a Seat for less than 10000 yen that will break soon.
The hardness of the Seat was also in an Off car, so this level of hardness is not a problem at all.
View detail
Perfect fit
quality is very nice. installation is very easy. Just remove factory locking mecanism from oem seat and rubber bumpers and install on new seat. fit is perfect, seat doesn't jiggle or isn't to tight a fit. looks really cool and is very comfortable. View detail
Fits: HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight
Double seat review!
It doesn't take long to ship and it's so nice to receive it quickly!
It was a bit cheaper than other companies.
I think I bought it because I liked the design even if it was expensive.
Installation, as everyone knows, is not difficult, but if there is a slight deformation of the fender, it will require separate processing.
I put it on before work and took a picture.
Please note!!
I like the stuff and recommend it! -------------------------------------------------- -------- Delivery doesn't take long and it's so good to get it quickly! It was a bit cheaper than other companies. Perhaps even expensive, I liked the design and bought it. As you all know, there is no difficulty, but if there is a slight variation of the fool, it will be necessary to process it separately. I only took a picture before the work. Please refer to it !! I like things and recommend it! Powered by Google Translator
View detail
Great quality cafe seat for Sr400 FI
Great seat with well built quality. Fitted well with my Sr400 FI with a custom battery tray. Fast delivery and great service. Happy shopping. View detail
Garage T&F Garage T&F Gun Fighter Seat
Ride comfort
At the beginning of the ride, I felt that the seat was harder than OEM due to the shape of the seat, but after about an hour of riding, I felt that I had gotten used to it and it felt more fit. However, after riding for an hour or so, I felt it fit better. Still, it is harder than OEM, so my buttocks might get sore after riding for a long time.
When the vehicle is stopped, the front end (crotch) of the Seat does not touch the inner thigh because the OEM is narrow, but this Seat is a little wider, so the inner thigh does. At first, I felt uncomfortable because I felt like I was forced to have my legs in a "crab crotch" position, but it may be rather comfortable because my legs are unintentionally (to avoid burns) separated from the Exhaust System.
The seating position feels similar to sitting on the front side of the OEMSeat. It is easier to ride Handlebar because I used to feel Handlebar was far away.
Installation
The mounting bracket on the front side is position-adjustable, but the back side has two countersunk screws, so you may need to use a low-head nabe screw or something similar depending on manufacturing variations. I was just barely able to get a Large sturdy one.
The mounting bracket that fixes the Seat has no cushioning material and is directly grounded to the Rear Fender. [Color] Clear is damaged. with Double-sided Tape Rubber sheet is attached to the Bracket as a countermeasure.
View detail
It is solidly built
The actual product is surprisingly large and solidly made.
I am thinking of Logo mark by Umbrella inside.
I am looking forward to seeing where I can install it.
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
very likeable
Ideal Tank
Seriously, I wanted it.
View detail
Fits: HONDA Steed 400, HONDA Steed 400, HONDA Steed 400, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 400, HONDA Steed 400 VSE
goodgoodgood
It's not worn yet, but the parts and quality look good. I'll leave a review again when it's rigid and installed later haha It's not worn yet, but the accessories and quality look good. I'll leave a review later when I'm wearing it after the rigid one View detail
I installed it on my CUB110pro.
It's been about a year and a half since I installed the CUB110pro. There is no rust on the body. There is no rust on the body and no fogging on the plastic window. I think the durability is very good. The shape is good and the cost performance is also good. View detail