Reviews
It is a good item.
I changed the Rear brake of BuellX 1 to a brembo 2 pod, the Pad pin that was attached with OEM exchanged this with a plane because there was a scratch, I have only been running a little but I got home and touched Rear caliper I feel like I'm getting warmer than before, is it because Pad's movement has become Smooth? (I do not know well). View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
very good
I was able to put it on just right, it's really good, but taking it off takes a bit of force but it's great. It looks really good. I really like it. Wherever I go, people are watching. I can put it right, it's really good, but when I take it off, it takes a little bit of effort, but it looks great and looks great It is recommended to buy. View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
brake lever adjustment bolt
Brake lever adjustment bolt from Kohken for Brembo Radial Master White Logo and Red Logo The engraving is made of SUS304 Titanium Coating, golden color Kohken Brake Pads for Brembo Radial Master White Logo and Red Logo The engraving is made of SUS304 Titanium Coating gold. ( translated by Google Translator) View detail
Rear also exchange!
brembo : I replaced the RearBrake Caliper 34 84 mm BridgeBolt. Like the Front, the Bolt shape is a Taper so Custom feeling will rise! Screw Length is Front - Rear is 40 mm for both. As with Front, there is a risk of insufficient strength than OEMBridgeBolt and it is dangerous - - - After replacement Circuit, pass etc. etc. I never use Brake on Hard, so I think I'm safe to ride on a regular basis and I'm durable. If you encounter problems after BridgeBolt exchange, I will borrow this place and report it to everyone! - - - It became the same use as Front Parenthesis It got better! View detail
I have various opinions - - -
Brembo : Brake caliper 30 / 34 I replaced the 40 mm bridge bolt. Since the bolt shape is tapered, custom feeling will rise! The screw length is purchased 4 pieces of 40 mm. Since it is 1 set 2 pieces, 2 sets are necessary! At this time, I want to check the screw length before purchase at the net "Brembo casting bridge bolt exchange" A lot of information came out other than the screw length when searching with. In the search, when replacing the bridge bolt with the stainless steel bolt, it became stronger against rust, but it was dangerous because the strength was lacking than the genuine bridge bolt! - - - In the retrieval information, Brembo casting replaced the stainless steel bridge bolt and it was damaged! There was none of the articles came out! Also, after exchanging, I did not use the brake hard on the circuit and pass etc., 125 cc It is installed in Grom, so I thought it would be fine even if I was relieved. If an accident occurred after replacing the bridge bolt earlier due to a dangerous thing, I think that it is not selling. After exchanging the caliper and bridge bolt, I use it without feeling anything uncomfortable, and the effectiveness of the brake is best than genuine. Be careful not to scrape with a panic brake! View detail
It is for MT-09, but attached to MT-07.
It is for MT - 09, but since Rear around was common, it was also attached at MT - 07.
The former Crab type Brembo also hit everywhere properly.
It was pretty good with a luxurious feeling with Black Anodized.
View detail
Fits: SUZUKI GSX-R1000
I am satisfied.
Since Chain is changed to 530, purchase. I was using the same SUNSTAR Sprocket, but I like this because I dislike the original Gold color. It is safe as it is a reliable Manufacturer. Just a little higher - - - View detail
Beautiful enough to be convinced even if it is told that it is Titanium
【What made you decide the purchase?】
I bought it for brembo's Monoblock caliper already mounted on MT-09.
Because the Caliper bolt of MT - 09 Standard is rusty, I ordered OEMCaliper bolt for YZF - R1 two generations ago and used it. Although it is Bolt for SS, it certainly is hard to rust and it is a high quality finish, but I thought that it looks too odd in combination with Brembo caliper because it looked like OEM so much, - I was looking for a thing of the finish.
Though it was a thing of Titanium that I found right away, I found Kolken 's Bolt in a place I was hesitant thinking about how to put out more than 20,000 yen for 4 Bolt in a fossil stone, and I immediately purchased it It was.
【How was it actually used?】
For amateurs it will cost more than 10,000 yen Material : It is about beauty that it is convinced even if it is told that it is Titanium.
Because it is Bolt of the Taper shape despite its plainness, it is full of Custom feeling, polite surface finish. It is full of luxurious feeling that I can not think of Stainless Steel.
By the way, things purchased will be 70 mm below the head. I adjusted it to the length of Bolt of R-1 that I used until that time. MT-09 OEM's Bolt is a few millimeters short, but there is no problem with mounting. Of course MT-09 bremboMonoblock (5 mm Spacer biting) Even a combination of them is no problem as shown in the picture.
【Mounting was difficult?】
I asked Motorcycle store to wear it by asking for vehicle inspection and maintenance.
In OEM Caliper fixed use, I think that it is good to tighten by following the specified Torque, but if you have a Caliper outside the company like my Motorcycle, the designated Torque may be different from OEM, I think that it is better for you to ask PRO if you are uneasy.
【Please tell me the installation point and hang】
When installing with Caliper's fixed, let's abide by the designated Torque for parts that are life-threatening.
Moreover, since I think that Bracket part is Large half in case of Aluminum, when using Bolt of Stainless Steel, I think that it is safer to apply Thread compound to prevent contact corrosion of dissimilar Gold group.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
None
【Have you compared items?】
- βTITANIUM Front caliper Mount BoltKit
When you get lost, you can make a mistake if you buy this. Because of the highest grade Bolt saying there would not be any more, I bought the budget Over this time I bought it off.
[Others]
To be honest, I think that it is a genuine and inconspicuous custom parts. But customizing it with hanghang saying that says this is saying that one and only wonderful custom machine will be finished.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch)
It is a product that can satisfy Large change v
The Anodized is also firm and the shape is subtle Curve is exquisite
I can satisfy you face-to-face
I think that you can consider where to break even when you kill it
View detail
Stainless Steel to prevent rust
Stainless Steel, but Screw's head is polished and beautiful.
Just by exchanging with Screw attached to Body but using Torx wrench it is better to stabilize the car body so as not to hurt Bolt.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch)
A similar Pivot arrived at GPMachine
【What made you decide the purchase?】
At some time before Events, GPMachine (Was it Rossi 's Machine? A similar thing is attached to the Pivot of Brake lever of the Brake lever, and I thought that I would definitely put in the brembo Master cylinder someday when I put my brembo Master cylinder.
This time, I purchased & installed it after exchanging from Oremble of brembo to Cut-outLever of Other Company Product.
【How was it actually used?】
As Lever changed together, the shape of Lever changed and Impact is strong and the shadow is thin, but I feel that the feeling when I stroke Lever is not different from OEM's Pivot, to be honest.
Just at OEM's Pivot, the coating on the surface has already been scraped off at less than 3000 kilometers so you can check on how much improvement is the durability of Stainless Steel Material and Titanium coating which is the selling phrase of this product Maintenance can be confirmed later I think that pleasure has increased.
【Mounting was difficult?】
At the same time, the outside Cut - outLever set which was installed at the same time was a thing with a high degree of difficulty in installation, so we asked the Motorcycle shop, who was always indebted, to perform the installation work.
【Please tell me the installation point and hang】
When OEM or Nisshin 's Master cylinder, the Master cylinder itself was inexpensive so I was maintaining without thinking anything, but since the brembo' s Master cylinder is quite luxury goods, the Master cylinder is broken I think that it is better to use Torque for tightening so as not to.
Just fixing the Pivot with Hexagonal Wrench while loosening the Nut on the lower side of the master cylinder and replacing it.
If you are familiar it will not take less than 5 minutes.
[Is there anything I was disappointed about?]
It is longer and heavier than OEM's Pivot.
Regarding Length, I think that the clearance of Tank and Master cylinder is fatal to vehicles with Limit, but my car is NAKED of Pipe Handlebar so there is no problem.
As for weight, aside from Racer running with Circuit, I have not seen it as a problem, since it is not a thing which changes by Motorcycle used in public road to a few Gram weight and becomes heavy.
Rather it is more important for me to obtain durability Up and Dress-up effects of Stainless Steel & Titanium coat from Steel.
【Hope for Manufacturer - Please let me know if you have any improvement points]
None
【Have you compared items?】
- KOHKEN KOKEN (Formerly photo-irradiated) : Lever Pivot Brembo RCS Master BlackXCoat
I thought Black was also astringent, but that was not the same as OEM if that was it!.
[Others]
I think that there is difficulty in wearing on vehicles with Clearance Limit, but I think that this luxurious sense of presence is quite Cost performance although it is inexpensive.
When replacing with brembo's Master cylinder, how about another one Plus?
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
I think that it is a good product with good looking and no rattling.
I bought it to attach brembo MechanicalSwitch to FRANDO's Radial brake. I am satisfied that I can install Exactly. View detail
Great product. I used it for the MC21 ( NSR250 Bike is fitted with the Brembo 19rcs master cylinder Before fitting I had fairing clearance issues. The new bracket and smaller fluid container has helped to not only clear the fairings but look really go
Great product. I used it for the MC21 ( NSR250 Bike is fitted with the Brembo 19rcs master cylinder Before fitting I had fairing clearance issues. The new bracket and smaller fluid container has helped to not only clear the fairings but look really good as well. Highly recomended. View detail
Fits: SUZUKI GSX-R1000
Body and Coordinates?
If you exchange anything, it's better to have a face White than the standard color. Earls Blue as Order
I think that it is slightly brighter than Blue of SEA BASS.
Since Base is SUNSTAR, there is absolutely no worry about performance.
Weight reduction Other targeting Conversion to 520.
View detail
It is good as One point
I think that the price is a bit high, but the texture is very good.
I am also solid and making installation is also Can Tan.
Motorcycle 1 Set for 1 Vehicle all (Front, Rear, Master) I exchanged.
1pc. Because I have surplus, Quantity : 1pc. It will be helpful if you have it.
View detail
Fits: YAMAHA ZRX1200
I am very satisfied..
I recently purchased Support for Black Anodized, because I made the Disc Lock to Large Diameter to 320 φ. It looks cool and I am satisfied with both installation accuracy and Anodized Treatment. View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Texture is better than ordinary Rubber hose
Brembo radial master
When you exchange Master Tank Bracket
Length did not match and I used this product.
It is Pank's Tank Bracket
10 centimeters is enough.
I cut it and installed it because it was long..
Cutting was cut vertically with a new Cutter blade.
View detail
Material : Even Stainless Steel is enough!
It is a price that Titanium can also be bought from price, but is it Titanium's 55? (1098 Standalone is 60?) I could not find it and purchased it without any help. However, the finish is wonderful, I felt Stainless Steel was enough. View detail
Fashionable from the feet
Easy to change
There are few people who notice it completely self-satisfied Custom but texture is up and it is very good
The price is a bit difficult but the satisfaction level is outstanding
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400 ABS
ZX-14R Rear sprocket
I purchased it for Dress-up, not OEMSprocket worn out. There was a color sample, but Image could not be done until actually purchasing. Because the car body is Green Light, I also made Sprocket Green Light. There are many people who are wearing the Gold system, but it is good because I almost never see this color.
View detail