Reviews
Quality is not mistaken
I do not mistake the quality, but the price is high.
However, the installation will be Fit with Exactly by making solid details.
It looks pretty nice as it looks at the color of Anodized.
View detail
Appearance highest
I tried to overhaul the Brembo caliper but I removed Bolt but something seems easy to do, so I decided to replace it because rust has also come with iron.
Even if it says anything, it looks better
Hexagonal Wrench also enters deeper, so it's hard to worry about it
It might be nice to have other coloring.
View detail
Exchange as it rusts
In the former OEMCaliper, this Pin was rusted and replaced
I chose the same color as Body, but it is shining in Caliper's Center with Titanium coating. This will not rust.
View detail
Fits: Others
It's pretty good..
bremboLever set (Out of print) Why is it cheaper to purchase separately with bremboLever than to purchase?
I am satisfied because the appearance will change.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
BremboOEM may be better
Until now I had problems with using Recall Brake master. Overhauled Mr. brembo MASTER Soon after use leakage changed from Hose to Cup to brembo's one. Thereafter no problem. View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
It's pretty solid..
Hose is thick and reinforced with Mesh, and it is better than Rubber hose.
I am a bit curious, so I take a moment to bend it. I do not want to apply the bending force on the Nipple part. Since the price is not high at all, I think it would be better to buy it a little longer and cut it.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Too good firm or too bad
We replaced it together with bremboRCSMASTER.
Although the texture is good, after six months of assembling like an image Brake fluid has blurred from MASTERNipple.
Although it is good Hose, weak part when used with ShortElbow shape too much "MASTERNipple this time" It takes a burden on the part and it is not good.
View detail
Looking Impact is Large Young - - -
【What made you decide the purchase?】
OEM's Bleeder Cap is degraded
Looking for alternatives, Color Anodized Aluminum
Because I found outstanding items, purchase.
【How was it actually used?】
Tasteless OEMCaliper Around one point Brilliant colors enter
Looks very satisfied.
【Was it difficult to install? (Hard parts case)】
OEM Rubber If the cap is tightened together with Bleeder Screw to prevent falling off,
I need to remove Bleeder Screw.
We, CaliperO / I did not have any problem as I went with H,
It seems that attention is needed.
(It may only be enough if you cut off the Rubber cap Band - - -. )
【Please tell me the point of installation and hang (in the case of Hard parts)】
Just like I'm addicted to my back
To hold down the top of Cap.
In fact if it is not properly attached, there is a danger of dropping out.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 N / A
[Is there anything I was disappointed about?]
The color Anodized Aluminum part has a structure just covering the Rubber cap
It unexpectedly comes off easily.
Sometimes it gets dislodged at the time of car wash, so I was concerned about that point.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want you to take measures to prevent falling off of Color Anodized Aluminum part.
Also, I hope that the price side will do its best a little more.
【Have you compared items?】
For purchase, compared with Rubber cap,
From this appearance Impact, select this product.
[Others]
Although the Color Anodized Aluminum part is easy to fall off from Cap,
Since Cap itself has never dropped out
I think that there is no problem in function.
View detail
To a little Custom
Quantity : 1 Set of 2pcs. In Quantity : Buy 2 Set.
Two in Front's Caliper, one in Rear's Caliper and one in Brake master.
Small goods, but it is casually conspicuous so I wish a little fashion.
However, if the price is a bit cheaper it is a full mark w
View detail
Easy Dress-up
I put rubber on the first and cover Cap over it
It is a commodity that worries whether you can fly.
Quantity : 1 Set of 2pcs. So front wheel SIDE, Rear, HandlebarRight Side
Total 4 → Quantity : 2 Set was necessary.
View detail
Fits: Others
Used for ZEPHYR 750
If it is 24, it becomes considerably lighter, but Stroke becomes Large and the finger Quantity : Even if it is grasped by 2pc multiplication it is unlikely to enter Neutral.
This is the best if you want to lighten it anyway by four people.
Stroke is increasing without complaining especially when operating with 4-piece multiples, but it is light and high rigidity female Pass can be cleared.
I think that it will be lighter even at 29 Ratio because it is simply accurate and operativity is good. Finger Quantity : I think that 29 Ratio will be more comfortable with 2 pc multipliers.
It is far better than GALE SPEED and because there is no adjustment mechanism, the number of parts is small and there is almost no backlash.
There is no needless headache and private appearance is the best.
View detail
Fits: Others Radial brake master cylinder
Price is Neck
I installed it on the Radial master of ADELIN Manufacturer
Although it is somewhat confusing, it is the same diameter as FRANDO's Push rod Pivot, but in the simple disassembly it can not remove Pivot,
Apparently it seems I have to disassemble up to Piston.
In this time, we did not disassemble so far and cut the PushPlate fixing hole of SwitchBody with Leutor and dealt with diameter expansion Large.
There is no problem with operation. Is it durable after that?.
View detail
Fits: Others Radial brake master cylinder, Others RCSBrake master cylinder
The angle of Bracket is perfect for KATANA
It installed at the same time as RCSMaster cylinder. There was not a separate problem in mounting. I was troubled with bremboOEM Product and other company's products, but the texture of Bracket etc etc etc. I respected and selected this place. The angle of Bracket is perfect for KATANA and it is satisfying if it is a little cheaper.
View detail
It is a little fashionable
■ Quality
There is no complaint at all.
I chose hard anodized aluminum, but I do not know how much difference is in the degree of abrasion with Hard and not so.
It is not like touching frequently, so it may be good to choose with color preference.
■ Notes
Nothing in particular.
If it says so strongly, it really just fits, so I was worried a bit whether I would not fall during driving.
Overall rating
Gold If you are closing your eyes on face value, you may not wear an ordinary tasty Rubber cap but a little fancy to wear it.
View detail
Fits: Others , Others , Others , Others , Others , Others , Others
bremboPat pin
Brembo caliper attached Pat pin is iron so Material : We exchanged for Stainless Steel's Koken Original. It looks better as it is Black, but because it is tight, Pin is pretty hard so I installed it a little wider. It is perfect if the price is a little cheaper View detail
With Exhaust System change
When changing from Nojima to NITRO RACING, Torque rod interfered, so I changed it to this type which utilizes OEM's Stopper.
Since the escape with the installation Bolt of the disc is also processed on the Support Body, it saved the trouble of adjustment.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, Others LAVORANTE Racing wheel, Others MARVIC Racing wheel, KAWASAKI ZXR750R 1991-1992, KAWASAKI ZXR750R 1993-1994, Others JB-MAGTAN Racing wheel, Others GALESPEED Racing wheel (16/17/18 Inch), Others DUOMO Racing wheel, KAWASAKI ZZR1200
NINJA 1000 Koken Rear sprocket
Mileage 18000 km. There was not much abrasion, but it became dirty and it was exchanged. I wanted to install RK's BlackChain and I was looking for a Black Sprocket. Matching with the awesome thing like Black Wheel is also perfect and it is so lightweight that it can not be compared to NORMAL, so you can expect Response up.
The price was expensive, but I am satisfied because it is a reliable Brand. I also expect durability.
Most seriously!
View detail
Fits: Others RCSClutch master cylinder
Simple is good.
It is the same feeling that it is exclusively good. Installation is also easy because it just tightens with Nut removed and pinched. Just because the lines etc are exposed, it would have been better if you protected them with Tube etc.. View detail
Fits: Others Radial clutch master cylinder, Others RCSClutch master cylinder
Fitting is good
As expected it is a special item. Bar handle and Separate handleSpec. You can choose from. For Clutch's 15 ml tank, HoseLine is diagonal, so if you cut Hose diagonally according to it, it fits well. I feel a little expensive, but with few choices and a good look it was one choice.
View detail
Clutch operation has become lighter
It is exchanged according to bremboRCSBrake master.
The installation itself is a difficult task because it is only a task of detaching exchange and adjustment using the adjustment fee of Clutch Cable, but it was a little troublesome as Wiring connection of Clutch switch was checking Wiring on Service Manual.
I feel like I installed it, but first I understand that the Clutch operation got lighter. However, because it was not easy for Clutch to get worse, it was necessary to adjust the position of Lever far away. If you have a shorter finger, wearing Gloves for winter is not recommended as it will be poor in operability.
It looks like Brembo's Body color somehow, so it looks like he looks the same as you expect it is as expected.
It would have been better if the color and texture of the paint could be adapted to brembo....
View detail