Reviews
Fits: Others
It is lighter than the K FACTORY Clutch release
I installed it in Bright2020 MODEL ZX-14R High grade When it is Ratio16, power is transmitted a little, but both Gear changing and Neutral have been installed It goes in with Snap; it will cut off completely at Ratio 18
I was able to use the NORMAL Tank Bracket, so the included Tank Bracket was I did not use it
View detail
Fits: HONDA NC700 S 2012-2013, HONDA INTEGRA 2012-2013, HONDA HORNET600 S 1998-2001, HONDA Fire Storm 1997-2003, HONDA CBR900RR 1996-1999, HONDA CBR600F 2011-2013, HONDA CBR600F 1999-2000, HONDA CBR600F 1997-1998, HONDA CB900 HORNET 2001-2003, HONDA CB600F HORNET 2007-2013, HONDA CB600F HORNET 1998-2006, HONDA NC700 SDCT 2012-2013, HONDA NC700 X 2012-2013, HONDA NC700 XDCT 2012-2013, HONDA SHADOW Slasher750 2000-2003, HONDA SHADOW400 1997-1999, HONDA SHADOW750 1997-2003, HONDA XL1000V Varadero 1998-2012, HONDA CBF600 S 2008-2009, HONDA CBF600 NABS 2004-2007
It's cool, but it's still expensive
I don't think there's any way around it since the outside Manufacturer is Anodized, but the thing is I think it's good but expensive
It looks good
It's called Sunstar, DID, and the stuff is good, so we need a setting where you can choose the color of the drivetrain components I wish they had made it, I wish they had made it
View detail
Fits: KAWASAKI ZEPHYR1100 1992-2007, KAWASAKI ZZ-R1100 1990-1992, KAWASAKI ZZ-R1100 1993-2001, KAWASAKI ZRX1100 II 1997-2000, KAWASAKI GPZ1100 1995-1999, KAWASAKI GPX750R 1987-1988, KAWASAKI ZX-10 1988-1989, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
usually
I ordered hard anodized aluminum, but the regular anodized one arrived Yes, sir! How may I help you, but it's called hard anodized aluminum It was written View detail
Fits: HONDA GROM
Buy it, install it, no problem!
I checked the part number from the Parts List and found that both of them are 41200-K26- Ordered for the same as the 901SprocketCOMPFinalDriven (34T) The durability is good because it is also in use on a large motorcycle
Installation is not a pompous installation It takes some time and effort But it contributes to differentiation and weight reduction (much lighter than OEM)
View detail
Fits: Others RCSClutch master cylinder
No good
The look and installation was good, but after installation, the Switch snapped from the base immediately
The price is not worth it for this quality
I wasted a lot of money
View detail
Fits: KAWASAKI ZX-14R 2012-2017, KAWASAKI ZZR1400 ABS 2006-2011
Those who are thinking about Color Anodized Aluminum are also ants!
I did not like OEM's sex appeal Zero Sprocket so I exchanged with Chain.
I ordered Black of Hard anodized aluminum because it is a black color that is dirty with rub.
At first I was planning to get Black with KOKEN's Color Anodized Aluminum as soon as I bought SUNSTAR's Number of teeth on the OEM's DuraluminSprocket but let me introduce this color Anodized Aluminum Pr RAN with advice from my senior Was.
I got an answer of 2 weeks until the delivery date, but arrived at hand for a while in a week.
Immediately I had my Motorcycle shop exchange with Chain.
OEM's Chain who does not know when it can cut off will be very Parenthesis better together with the Silver chain of the DID which I quickly truncated and exchanged, satisfactory Spec. became. (Because Custom's Concept is Black and Silver)
After exchanging, I ran 200 km so I confirmed the condition of Sprocket, but the condition was beautiful without anchoring of Anodized. To be honest, I thought that the part rubbed against Chain would be peeling off was unexpected. "Hard" The name of Anodized seems to be not Date.
What made me happy miscalculation is the place where love which flew to Sprocket can drop easily. It is likely to keep a beautiful state for a while.
Also when Sprocket replacement time comes, same Spec. I'm thinking about ordering.
View detail
Fits: SUZUKI GSX-R1000
I am satisfied..
【HardBlack】 Purchase.
1. Body and Anodized are safe for Large Hand Manufacturer.
2. The original Hard anodized aluminum 【Champagne gold】 It is considered that the color can be changed without impairing the function of.
▲ 1. Only 2. It was not seen in Champagne gold around around 000 km (Were not you noticed by Gold and Silver?) Partial peeling occurs. (Around 2000 km in use) (Attached image 1)
▲ 2. Depending on the future of the above 1 symptoms, continued purchase is hard to think when considering the point that only prices rise due to color.
I get a very satisfying look for minutes to see from a distance. (Attached image 2) However, it is a product that I thought was good only this time.
View detail
Fits: Others
The width of Clutch meat widens → Long time to grab → Tired of hands → get used to → ask what you bought for yourself
L29 (Short lever) Although it is a feeling of use, it is honestly subtle. Besides the events of the general comment, the cause of exhaustion is Lever too thick, I think that it is also in the position to put your finger, but even though thoughtfully mistaken, I gave up because it is Wire drawing after all. I did not match Mini bike. Also there is hang in the installation of Lever side Wire Stopper (Although it is written in the Instruction Manual, it is insufficient, Pivot gets little by little as you make Lever outwardly and it can be laid out Line).
Self-assured world of parentheses only (I should have done to Berlin).
I got caught on the top of the Lever part with kohken, and wanted to make it the simple is best, unnecessary thing.
View detail
Fits: Others
Since it is a high product, let's buy it after seeing the real thing
Large Light weight, rigid feeling, no wobble, smooth operation. The color of Lever holder was settled in Titanium, I liked Large. However, Small scratches are seen in Lever and Black of Adjuster, and politeness is not felt in the assembly of Aluminum, Jura. Consumers will be worried about this kind of things. View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA XJR1200 R 1996, YAMAHA MT-25 2015-2017, KAWASAKI Z250SL 2016-2017, YAMAHA YZF-R25, YAMAHA YZF-R3 ABS, KAWASAKI Ninja250SL, KAWASAKI Ninja250R, KAWASAKI Ninja250
Custom feeling highest
Because it is Black wheel, CustomMatch feeling highest !! Although it may be self-satisfactory, it is light weight durability which is not comparable with weight comparison with NORMALS PROTECET so it is not wearing it? View detail
Fits: SUZUKI GSX-R1000
I am satisfied.
Since Chain is changed to 530, purchase. I was using the same SUNSTAR Sprocket, but I like this because I dislike the original Gold color. It is safe as it is a reliable Manufacturer. Just a little higher - - - View detail
Fits: Others
It's pretty good..
bremboLever set (Out of print) Why is it cheaper to purchase separately with bremboLever than to purchase?
I am satisfied because the appearance will change.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA XJR1200 R 1996, YAMAHA MT-25 2015-2017, KAWASAKI Z250SL 2016-2017, YAMAHA YZF-R25, YAMAHA YZF-R3 ABS, KAWASAKI Ninja250SL, KAWASAKI Ninja250R, KAWASAKI Ninja250
It is a truly feeling
Expected though it is expected before Koken's Anodized Treatment is attached to SUNSTAR !! Large !! Surprised by the amazing lightness There is a look Impact and it is looking forward to wear! View detail
Fits: SUZUKI GSX-R1000
Body and Coordinates?
If you exchange anything, it's better to have a face White than the standard color. Earls Blue as Order
I think that it is slightly brighter than Blue of SEA BASS.
Since Base is SUNSTAR, there is absolutely no worry about performance.
Weight reduction Other targeting Conversion to 520.
View detail
Fits: Others
I did not want to lighten it, but it's pretty light!
The color of Standard Product was a little shabby so I tried it like NORMAL っ ぽ い Black.
It looks good, it became lighter than I thought.
However, there is too much play in Lever itself! It moves quite well up and down.
Besides that price, this accuracy is a structural problem.
Manufacturer here seems to be a lot of good products, but all I bought is Ha Gap.
View detail
Fits: Others
Used for ZEPHYR 750
If it is 24, it becomes considerably lighter, but Stroke becomes Large and the finger Quantity : Even if it is grasped by 2pc multiplication it is unlikely to enter Neutral.
This is the best if you want to lighten it anyway by four people.
Stroke is increasing without complaining especially when operating with 4-piece multiples, but it is light and high rigidity female Pass can be cleared.
I think that it will be lighter even at 29 Ratio because it is simply accurate and operativity is good. Finger Quantity : I think that 29 Ratio will be more comfortable with 2 pc multipliers.
It is far better than GALE SPEED and because there is no adjustment mechanism, the number of parts is small and there is almost no backlash.
There is no needless headache and private appearance is the best.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400 ABS
ZX-14R Rear sprocket
I purchased it for Dress-up, not OEMSprocket worn out. There was a color sample, but Image could not be done until actually purchasing. Because the car body is Green Light, I also made Sprocket Green Light. There are many people who are wearing the Gold system, but it is good because I almost never see this color.
View detail
Fits: Others RCSClutch master cylinder
Connection part is weak
I had disconnected from the root of Wiring that I was out of the Switch unexpectedly when I was hanging Lever when changing Handlebar after installing. It is structurally unrepairable. Handling requires careful attention. Since it is not a moving part in normal use, there is no problem. View detail
Fits: Others
If looking and Custom focus, there are also purchases!
ACCOSSATORacing clutch,
GALE SPEEDWire Clutch Holder Kit,
I was worried but brembo's MechanicalClutch Leva
As it is currently installed, the price 32000 yen (tax-excluded) of
We selected only Holder L-29.
We only port the Lever division.
Holder comes with Clutch switch.
Clutch switch has 2 Patterns.
Wire play adjustment & Lever position adjustable.
The Clutch switch can be a Small Type,
I feel a little tired..
Three lines are connected, but when installing,
Treating it somewhat seems to break from the root Pin.
Especially finger Quantity : People who are 2 pc or 3 pcs,
Feeling the Wire to be drawn,
If you do not set Lever to a long distance
Clutch may not run out.
Making a little play makes it lighter,
No problem if you cut Clutch with 5 fingers.
Look, brembo's Brake MASTER and
It is GOOD because I feel unity.
However, the color was not better than I thought.
The price is also high (With Lever, tax included 40,000 yen over) ,
It was slightly lighter than NORMAL,
There is no need to forcibly change.
As stated above, if you are concerned about the appearance it is Recommendation.
Do not forget to buy Seal of ItalyMark on bespoke.
Depending on the model, Clutch
Because it seems there are times when it can not be cut,
Type of Holder is L-24 or L29 or L34
Let's choose firmly from Lineup.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, Others LAVORANTE Racing wheel, Others MARVIC Racing wheel, KAWASAKI ZXR750R 1991-1992, KAWASAKI ZXR750R 1993-1994, Others JB-MAGTAN Racing wheel, Others GALESPEED Racing wheel (16/17/18 Inch), Others DUOMO Racing wheel, KAWASAKI ZZR1200
NINJA 1000 Koken Rear sprocket
Mileage 18000 km. There was not much abrasion, but it became dirty and it was exchanged. I wanted to install RK's BlackChain and I was looking for a Black Sprocket. Matching with the awesome thing like Black Wheel is also perfect and it is so lightweight that it can not be compared to NORMAL, so you can expect Response up.
The price was expensive, but I am satisfied because it is a reliable Brand. I also expect durability.
Most seriously!
View detail