Reviews
for BremboRust measures Pad pin
brembo BilletCrab caliper (120.A441.10) Mounting on
brembo 84mm PitchCutting Type Crab caliper (so called BilletCrab) I installed it in
Beta pinQuantity:Pad pin of Type to be fixed with 2pcs.
The BilletCrab came with iron-like pad pins, so I was worried about rust, since it was the undercarriage.
There are some Titanium pad pins available from ThirdParty, but they are too expensive…
So here it is.
The base material is stainless steel, which is resistant to rust, and the surface is coated with titaniumium.
At the very least, I believe it will serve the purpose of Rust measures well.
further (Although it is subjective) It is a classy gold with a high quality texture, a knob on the head for easy maintenance, and even a hole in the head for wiring, with the letters ”K” proudly displayed on the top.
The texture and functionality are perfect.
Although we are fully satisfied with the content, 2,000 yen seems a little expensive from a sensory point of view.
(Material sold for more than double the price.:Titanium is out of the question.)
However, it is a niche product, and I am convinced that it is within a reasonable range.
View detail
It's better to have the basics.
brembo BilletCrab caliper (120.A441.10) attached to
Unlike the casting type Brembo crab caliper, the Cutting Type (so called BilletCrab) Caliper's Caliper does not have a pad spring.
It will still function as a Brake Caliper without it, but the
Pad is free and chirping sound when not running Brake.
Pad is annoying because it moves around freely when Caliper is removed
and sober negatives.
Here is a ThirdParty product that can solve this problem.
This product reduces chattering noise and keeps the brake pads in their original position even when the caliper is removed.
Since we basically do our own maintenance, we introduced this system especially for the second reason.
As a result, we are very satisfied with the results, as it eliminates the hassle of attaching and detaching Caliper.
Counterpart Pad Replacement (or rather, Pad pin insertion and removal) will be cumbersome, but the frequency is limited, so that is a good thing.
Note that the Brake Pads Pin must be removed once when assembling this product.
Also, since there is no Instruction Manual for installation, you will have to install it by yourself by using the pictures as a reference.
It is not a very difficult task, but since it is a Brake component, it may be better to leave the installation work to the Shop if you are not sure.
View detail
![KOHKENBrembo master cylinderEZPackage 19RCSBrake/Double/Full Cowl [Color] SmokeTank](https://global.webike-cdn.net/photo/impression/67/67f6fdc9e52db6ea965397267ab35bbcL.jpg)
Fits: Others
No complaints!
I'm using it in conjunction with the Caliper in the photo, and it seems to work well in front of the camera and has good operability.
The ability to make various adjustments to your own preferences is a boon to operability.
The look is very chic without being flashy, and I like it a lot combined with Koken's Tank.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Fluid Sweat
After six months, Fluid sweats and ruins it.
Quantity:I bought 2pc and both of them are ….
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Good Quality & Packaging
The quality of the item is good. The hose is very durable and the clamp is fit to the hose. The item was apcked nicely without any dent. View detail
SECTION
For those with ABS, Bracket's Seisa k is required.
There is also a part number for Bracket with Bracket, but it's not sold...
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Good Quality & Packaging
The item is good and was packed properly. It's fit to my radial brake & clutch. Nice finishes and brank marking. Very good product. View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
Good Quality & Packaging
Good quality and was packed properly. It fits nicely in the radial brake and clutch. The finishes of the material is seamless. Overall product was excellent. View detail
Good Quality & Packaging
The item was fitted nicely in the bleeder. Good quality of the product and was packed properly. The color was very nice with the brand name on it. View detail
Good Quality & Packaging
The item is fit in my radial brake. Good quality and was packed properly. I like the engrave brand letter on the bolt. The item is durable. View detail
If you can see Logo as One point, you can.
I wanted One point around Breather, so I bought this one.
It is the logo of Koken in the small parts, but the logo insists unexpectedly.
I thought that the white letters on the blue background made it look like one point. I felt that it was a good idea, but I think it's a matter of taste.
In addition, I attached 3 calipers in total with Front caliper (Single), Rear caliper and Front master, but 2 Quantity:It's a Set, so in this case you'll have one left over, so you'll have to settle for a spare.
The construction is well made, but the cap part is normal rubber, so the durability is the same as the normal one.
Well, it's not a part that deteriorates so much, so it's Recommendation for those who want one point of color.
View detail
To dress-up the Handlebar area
Since I changed the front brakes master of MONKEY125 to brembo, I decided to install the Reserver. [Color] I combined this one with the one I made for Smoke.
In terms of weight, it is heavier than the OEM plastic because it belongs to Gold even though it is Aluminum.
The AnodizedSpec. does not have any logo, so the Handlebar area is tighter.
There is no problem at all about the processing accuracy, etc. because it is a reliable Koken brand.
The only problem is that the price is a bit high.
View detail
If you don't mind Logo, you can use it.
I bought it because I wanted an Accent around the Handlebar and to make it easier to adjust the Lever.
The installation is done with a little bit of tapping with a plastic hammer, and it is fixed with a stop screw, so you don't have to worry about the gap.
The larger the Dial, the easier it is to adjust.
However, since Koken's Logo is quite assertive, I think this is a place where tastes differ.
I don't mind the Monkee 125 because it is a motorcycle that is only for fun, but it depends on the person who uses the Large SS.
The quality is high and it is a Recommendation product.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch)
Not bad quality... but...
Since I went with the brembo RCSMASTER, I switched to this for durability.
Accuracy is perfect and rigidity is not a problem.
It's also black, so it doesn't look like it's been replaced! It is a natural finish.
As for the dissatisfaction, I think that it is because it is common use with Clutch, but Screw allowance is long and there is too much.
If I say it is not conspicuous because it is reverse side, it is not conspicuous, but it is the part which becomes a little anxious.
I'm sure this was probably done with the retrofit switches in mind, but the RCS brake master has standard equipment switches, so it would have been better if there was a version with a shorter screw allowance.
View detail
![Aero Lever for Brembo RCS Master [Color Anodized Aluminum]](https://global.webike-cdn.net/photo/impression/21/217e6b6c69e7ccd60c7506cd193b9da2L.jpg)
Short lever options
Since I replaced the brembo RCS and Koken clutch holder, I also replaced the brake side with this short lever.
1~Quantity:Brakes are originally made in Quantity (2pc).:We use it for 2pc seating and it comes very snugly.
The accuracy is good and it sticks firmly to the Foldable Holder.
The price is a little high, but the good thing about this is that it is shared with Clutch Side.
If you want to keep a spare, you only need 1 pc.
The durability of the Anodized is unknown, but in general I feel it is a good product.
View detail
Fits: Others
In conjunction with the brembo RCSMASTER conversion
I changed the brake to brembo rCS and also changed the clutch side to this.
As for the lightness of the clutch, the honest truth is that I don't know the difference because it is originally a light MONKEY125. In the future, when the engine is modified and replaced with a Reinforced Clutch, there may be a difference.
It looks like the color of Anodized is a little different due to the difference in material? It is not enough to be concerned about.
I like it because it gives a sense of unity around the Handlebar.
Short lever is chosen because it is a MONKEY lever, and finger 1 - Quantity:It is claimed to be for 2pc seating, but it is about the same as a normal short lever, so operability is not a problem.
The adjustment is easy to handle with Dial type, and the switch is attached, so it can be installed without a problem if you can connect the electrical system.
It's a good product if you can look past the high price.
View detail
![Mechanical Clutch Holder AVANZA [AVANZA] Holder Only L-29mm](https://global.webike-cdn.net/photo/impression/4b/4b897db4a43af4b1d6bda4fc8c484878L.jpg)
Fits: Others
What is the meaning of Retractable Lever?
I bought the brembo half lever and installed it, but the lever interferes with the holder and does not fold over, I sent it to the manufacturer for inspection but they said that is the way it is and I ended up buying the Retractable Lever which does not fold over. I think Foldable is the one that can be repaired by Lever only when it falls down. (It depends on how you fall, of course.) This is the best product I have ever purchased. It's a shame that the manufacturer didn't listen to me. If you buy it on the premise that it will not fall over, it will be good because the clutch will become lighter and the meat range will become a little wider and it will be easy to use, but I cannot recommend it. View detail
Fits: KAWASAKI 250TR
It's called Exclusive Design…
I bought it because my Motorcycle has almost Zero load capacity.
Koken's coloring is very beautiful.
In other people's Impressions. RALLY 591. However, the one I received didn't have a sticker on it and it didn't come with one. I don't mind because I don't particularly need it, but I think it's better to inquire if you feel you need it.
The quality of the Carrier itself is a bit questionable.
Parts are welded in a distorted manner.
OEM Parts (Tool Box) to interfere with
It says that the position gap is due to individual differences, but the gap is so large that it is uneasy.
To solve the above, I installed it with a little modification and additional purchase of Spacer and others.
I was worried because this is not a normal installation method, but I am quite satisfied with the look and practicality after installation.
View detail
Fits: Others RCSClutch master cylinder
It's expensive stuff!
(Large tear) For the first time in years, I had to get out the Soldering iron and install it! My hands were shaking and I melted the plastic part! To top it all off, it also made contact with the Mirror cover and left a mark! It's the worst.
Now, if you're asking me if I'd recommend it to a friend... I'm annoyed at the inconsistency of having to use it, even if I have to fix it, because if it doesn't come with brembo oem, it's the only way to go!
View detail
Fits: Others
Well worth the price.
I thought it was OverQuality, but I found Φ14 size which is made for MONKEY125 and Grom.
This is EZKit, so you can use Hose, Reserver, Tank Bracket and Quantity.:Set, and the only thing you'll need separately is Banjo.
Control is a feeling that the braking force can be pulled out only in the amount that Lever is pulled, and the benefit can be felt greatly in the penetration to the corner etc. while the feeling that NORMAL etc. works in proportion to the strength of the grip.
Lever ratio is Φ34 for Crab type Brembo, 18 is a bit large for Stroke. So I got the Touch I like with 20.
As for the installation, I changed the direction of the Banjo, so I installed it by changing from NORMAL = Right twist to Left twist of the Swage line.
It's a bit expensive, but the effect is worth it, so if you like brakes that work slowly, please try it.
View detail