Reviews
Mesh re-covering
When the A-techSeat Cowl is installed, the mesh around the brake is reupholstered and tightened. View detail
It is well made and looks good, but it is expensive.
The bremboRCSMASTER and Aderin Clutch holder were replaced from the lever that came with each.
I use it on my MONKEY and the large size and feel is perfect.
View detail
COOKING - Short TypeLiver
We treated our beloved Motorcycle to a brembo Corsa CortaMASTER and installed it.
OEM was not a good shape for Lever and it was Long, so I wondered if there was a Short Type. I looked for a short type. There was one. It was made by KOKEN. I had purchased other products from KOKEN, so I knew the quality of their products.
I have large hands and a strong grip, so the Short Type Lever is sufficient for me. The feel is very good, and my index finger does not get pinched (operated with middle and ring fingers). No complaints.
View detail
Fits: KAWASAKI ZRX1200
There were no color options.
There was no color choice, so I ordered Silver Anodized Finishing, but received Black.
And the delivery time was over a week late. Even if I returned it, I had to peel off the color myself to use it because I had to wait for it to come back in stock again.
View detail
Fits: YAMAHA YZF-R6 2006-2017, YAMAHA MT-07 2014-2017, SUZUKI GSX-S1000 2015-2017, YAMAHA MT-09 TRACER
You turn it off when it's not good for WeBig.
Regardless of the product, you erase the text when it's not convenient for WeBig's side. View detail
Fits: YAMAHA YZF-R6 2006-2017, YAMAHA MT-07 2014-2017, SUZUKI GSX-S1000 2015-2017, YAMAHA MT-09 TRACER
The product is definitely a product as it is MADE IN SUNSTAR, but there is a problem with the shipping description on the Webig
It is a MADE IN SUNSTAR Sprocket, so you can be sure of the quality.
This time, I asked Red to process it.
It is lightweight and sturdy, and although it is a bit expensive, I am satisfied with my purchase.
However, when I looked at the shipping schedule before ordering, it stated that it would ship within 5 business ….
Then I thought I would get it in a week or so, and since I was scheduled to replace the Tire, I was going to have it replaced with it at that time.
When I looked at it two days after purchase, it had changed to say it was scheduled to ship within 7 business days.
At that point, shipping will be 9 days after the purchase date.
Tire replacement date will not be met.
Since we could not change the date of the tire replacement, we ended up having to replace the tires separately from the tire replacement.
It took almost two weeks to arrive.
If you replace it yourself, you will have to do it twice, and if you have it installed at a store, the labor cost will be more expensive.
It's nice that it arrives ahead of schedule, but I don't want the shipping to slow down day by day.
I would like to see it done a little better.
It is not even a guide.
The reason I did not reduce the number of stars and rated the product properly is because the product was a good one, regardless of WeBig.
View detail
Fits: Others
Better not to buy. Folding Type Clutch Lever that cannot be overturned
I used the Foldable Clutch Holder, and even though it says that the Brake lever for brembo corsa crota can be used, the cormorant was not able to be used. However, when I used it, it was a clutch holder which was not usable.
Quantity:As you can see in the photo of the 1pc. eye, if it collapses just a little, it will not collapse due to interference.
If it falls over, it is likely that the Lever will break or the Holder itself will be damaged.
Clutch lever will cost about 7,000 yen, but if the Holder is damaged, 50,000 yen will fly away.
It seems to be an obvious design error.
I tried to cut off the interfering part, but the other side of the cut off side was also interfering, and I gave up cutting off that side because it was the place where it would be easily seen if I cut off the other side. Folding Type Clutch Lever that cannot be overturned The product is to be used as a
I think this is a clear design error and should be recalled and replaced with a countermeasure.
We recommend that you do not purchase if you are considering purchasing.
View detail
Fits: Others
Installed on VTR1000SP
I am using it on my VTR1000SP2 and I am very satisfied with the tightly braked tank. The only problem is that the master tank is not compatible with the SP2's Cowl Bracket, so I decided to use the Craftsman tank. View detail
Fits: Others
brembo
This is installed along with the change to brembo brakes.
Since the installation as it is causes interference, we managed to avoid the interference by adding a few offset parts.
Quantity:Set, I wish it were cheaper.
View detail
Fits: Others
Improved Control
Controlability is improved to Large width.
It is a pleasure to apply Brake.
Brake hose for installation (GOODRIDGE Bolt-on Kit by car model) was also replaced.
The position is increased by 5mm with Cay Factory's Handlebar Up kit, otherwise the lever would hit the cowl when the lever height is set to the desired position.
Clearance is Limit when Handlebar is turned fully off.
View detail
OEM 298 from 2021 MT-09SP used to convert to RIOEM320
I purchased this color to replace the OEMΦ298 on my 2021 MT-09SP with the OEMΦ320 on my current R1.
However, Lineup does not have 11mm, and I thought that if the pad was popping out, I could shave the collar and buy a 12mm pad.
The result is that the Rotor perimeter and Pad edge are perfectly aligned without machining.
Perhaps the OEMDisc Rotor has a diagonal chamfer on the outer circumference and the pad end is positioned inside the chamfer, while the R1OEMRotor has no chamfer on the outer circumference, so the difference may be +1mm. (This is just my imagination.)
I had gathered some information on the Net before I made the 320 conversion, but I was unsure because I had heard that some older models had a perfect fit with a 13mm offset, but in our case, a 12mm offset was just right.
If the pad protrudes from the outer circumference of the rotor, when the pad is worn down, if the unworn portion becomes the same as the rotor thickness, the pad cannot be inserted any further into the rotor, so the brake cannot be used. If the collar cannot be adjusted, it is necessary to shave off the protruding part with a grinder or the like to match the outer circumference of the rotor.
View detail
This is for CORSA Corta only. It is a RECOMMENDATION for those who prefer square levers.
The CORSA Corta has a thin lever and I did not like the feeling of it digging into the belly of my fingers when I gripped it.
The brembo racing master I used to use had a better feel with a more angular lever, so I tried to transplant just the lever, but it was impossible because of the different shape.
I was looking for a good Other Brand Product and this one caught my eye. I have large hands, so I chose the Standard size.
I tried to remove the OEM lever, but it was licked in an instant because Torque screws were used and were solidly tightened.
I couldn't back out any longer, so I flew the Screw head with a Drill and forcibly removed it.
I felt brembo's strong will that "don't remove it. I felt brembo's strong will to make the product.
We procured a replacement Screw at Home center. In addition, we also prepared a Nut.
I replaced the Lever and tightened the Screw, but the Lever moves a little.
The thickness seems to be slightly different from OEMLever, and it might have been better to put a Shim or something in between.
I forcibly tightened the Screw and fixed it with Nut.
I'm in a big commotion just by changing the lever.
The feel after the replacement is good. The square cross section seems to suit me better.
Recommendation for those who are uncomfortable with thin levers.
View detail
brembo installation
We installed this bracket along with the brembo bracket. The shape of the bracket looks good and I like it, but I had a little trouble installing it as it is with the separate handle and cowl because it interferes with the bracket.
It would be helpful if the selling price were a little lower.
View detail
Small personality, durability is …
I found it to be a very good product for One Point Fashion for my feet.
The work itself only requires replacing the Breeder's Cap, so even beginners can do it quickly and easily.
The texture of Anodized was good and I thought it was indeed a Kohken product.
But it's not very durable;
After six months, the Rubber cracked, and after about seven months, only the Aluminum Cap was missing.
It may be inevitable for the structure to fly away, but the caliper generates heat, and I would like to see the use of heat-resistant and durable rubber.
We wanted to take a look at the NORMAL Rubber cap, so we gave it a slightly lower score.
View detail
Fits: Others
This is for CORSA Corta only.
When I removed the Pivot pin from the CORSA Corta, I discovered that the Black color was peeling off.
The Racing master I used to use also had rusted PivotPin, so Steel is no good.
The rumor that brembo's quality is declining these days may be true if it deteriorates after less than six months of use.
This product is available from Koken, and it would be better to replace it if you want to use it for a long time.
Material:Stainless Steel with Titaniumium coating, so there is virtually no risk of rusting.
For CORSA Corta, this is a Recommendation.
View detail
Installed on a WR250R
Since I installed RCS15, I needed a tank bracket, so I installed this one.
Tank was installed without any interference.
View detail
Fits: Others RCSClutch master cylinder
Note that Wiring is weak.
The size is very small, but the wiring is very weak. I wish the wiring part could be reinforced with a plate or something. View detail
Fits: Others Radial brake master cylinder
Loved the look of it.
Clutch Side and purchased at the time
Quantity:Pair (for Left and Right) I liked the same look and feel of the product sold at
I think it would be better for everyone if the instructions were a little easier to understand.
If you understand the structure of the Switch, you can install it without any problem.
I don't know how much longer RACING's Switch will be on sale, but Quantity:Pair (for Left and Right) I am very grateful that it looks the same in
View detail
Fits: Others Radial clutch master cylinder
It doesn't have to be.
I just used Hydraulic Switch on brembo and it still broke!
I was using it with a short circuit, but the Brake Side also stopped responding, so I decided to use the Quantity:Pair (for Left and Right) I bought it because KOHKEN's was the best quality for the product I was looking for.
If you understand the structure of the Switch, Wiring, etc., you can install it without any problem.
If you don't have the ability to understand it, don't buy it.
The manual is not easy to read, but I will basically ignore it and assemble it.
It seems to have Omron's WaterproofSwitch on it, so I think it's reliable.
View detail
Repair Parts
Tie Wrap together the Wiring from Switch and it will break in the near future.
The original Switch was just discarded in anger.
This Repair Parts did not include Bolt, as expected, but Bullet Terminal was included, thank goodness!
I headed to my neighborhood Home center to buy Bolt!
Size is 2mm and I bought the length 10mm.
Washer and Nut also Quantities:Set and it is 5Quantity:It contains about a set and costs 200 yen. I don't think I will be using it in the future, but I put it away in the "Large" case.
What I'm trying to say is don't throw Bolt away!
View detail