Reviews
LED Tail Unit is the best!
I have previously installed Bulb Type LEDs from Motorcycle Supply Store,
Small and Stop brightness is almost the same (hard to tell if Brake is applied).
I was just looking for something better.
The brightness of Small and Brake is enough to check the hat Drill and
I was satisfied with Large!
View detail
Fits: HONDA CBR1100XX Super Blackbird, HONDA CBR1100XX Super Blackbird
having outstanding light intensity
Installation requires disassembly of Mirror, so it is a bit large.
Light intensity is not a problem.
The package is only wrapped in Air capSeat, no product name tag, no warranty card, no Instruction Manual on how to install, and the product is 100% handmade.
I don't have any complaints, especially if the durability is good, but that will be the result in a few years.
View detail
It's just so bright!
It's brighter anyway, and I don't have to worry about the bulbs running out!
Easy to install, just pop it on! I'm very satisfied!
View detail
Fits: KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400
Good
I was going to change the bulb because the rear light was dark, but I decided to buy it because I thought it would be better to change it to LED. It's easy to replace, so it's easy and good. View detail
For those of you who say CB Tail lamps are 2 round lamps!
It uses an open Battery.
CB750 that seems to have some electrical concerns.
Power savings (likely to be effective) and
Hoping to be Dress-up (look good)
And installation is easy.
Been in use for over 3 years, no blown bulbs, etc.!
Unfortunately, I can't see it myself while driving. (Lol)
View detail
Fits: HONDA GB250 CLUBMAN Type 4, HONDA GB250 CLUBMAN Type 1, HONDA gb250 clubman type 1 - 4, HONDA MOTRA, HONDA V-TWIN MAGNA, HONDA V-TWIN MAGNA S, HONDA TOPIC, HONDA TOPIC PRO, HONDA NS-1, HONDA JADE, HONDA GYRO X, HONDA GYRO UP50, HONDA CB-1 400
Single row lights no longer work…
Purchased in November 2019 and the Right vertical row stopped lighting up in October 2021… View detail
No problem installing it!
It has a handmade feel to it, but I had no problems with the installation.
In the case of R1-Z, the tail light is two lights, so it is a form of wiring to the socket of one side one light.
It's just a moment to remove and install the Cover.
The essential brightness has become brighter, but it's self-satisfying because it's a place where you can hardly see yourself.
When I changed the Blinker to LED, I installed the Tail lamp as well.
It's pricey, but I chose this one because it's more reliable than the dubious Yahoo!
The wiring coking is also waterproof, so I was able to rest assured in that aspect.
View detail
Fits: KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400
It turned out really cool.
The atmosphere of the Tail Lamp has changed completely. Since there is some play in the unit, I fixed the unit with a PackingRubber through the screw post. View detail
Easy kit to convert Tail lamp to LED
This kit allows you to easily convert your existing Lamp to LED by simply replacing it. Simply insert the harness into the original lamp and you are ready to install.
The original Lamp has two bulbs, but Kit's Wiring connects to only one. You may need to be careful about rainwater intrusion.
Because the arrangement of LED is a design which reminds you of CB400SF, the appearance is also cool and visibility is improved remarkably. There may be energy saving effect by LED especially for RC42 which has weak electric equipment.
View detail
Fits: KAWASAKI ZX-11, KAWASAKI ZX-10, KAWASAKI ZZR1100 C, KAWASAKI ZX-10, KAWASAKI ZZR1100 C
LED, bright!
The work itself is not so difficult, but I think that the beginner will be saved if there is a manual.
Since 40 LEDs emit light from 2 bulbs, the whole Tail lamp feels like shining and the atmosphere is quite different.
Even though it's LED, it's shining 40 bulbs + Alpha, so it's a mystery if it can save power.
View detail
CB750rc42 2008 MODEL
Easy to install!
Great visibility!
It's self-serving, but 3150!
View detail
Fits: YAMAHA FZR250, YAMAHA SDR200, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TZR50, YAMAHA FZR250, YAMAHA SDR200, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TZR50
It's good for old cars.
It saves power and stabilizes power generation.
If you change this product and the Headlight Bulb to LED, Idling will be stable.
The product is also rainproof and easy to replace.
View detail
It's bright!
Anyway, it's Yoh
I've bought a similar looking product from one place before, but this one is just too expensive The brightness is outstanding Also, it was easy to install and didn't require any modification
View detail
Fits: KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400
It's a shame that the price is not worth the quality
An Instruction Manual is not included in the kit, but it is available for installation You can install it with no problem if you are only careful to insert the
Visibility from following vehicles is much better than the NORMAL (the amount of light emitted while driving has been confirmed)
However, I was surprised (surprise) when I opened the Unit's packaging Vinyl What a texture! I thought to myself This texture for this price? I had to think about it It was very disappointing, as it was perfectly fine in terms of installation and use
I was keenly aware that it's hard to get a feel for the texture on the PC screen
View detail
Fits: HONDA GIORNO CREA DX, HONDA GIORNO CREA [GIORNO CREA]., HONDA GIORNO CREA [GIORNO CREA].
Satisfied with the brightness of the LEDs
Installed Round Type Tail Lamp on SR400 from another manufacturer I used to use the LED Specification of Lucas tail lamp I used to use LED Specification of Lucas tail lamp, so I'm going to use it again this time I found the From Neighbor LED Tail Unit when I was looking for the LED inside, and I found the Large I'm not sure if this is the right product for you, but it is a Round Type It was also perfect But I had a hard time not knowing the power supply for the three wires I wish that an instruction manual for the power supply was enclosed at least I am very happy with the operation of this machine View detail
Fits: KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI D Tracker 125
They're all lit up
I used double-sided tape to adhere it, but it does not come off and can be used It is a good product functionally with no partial breakage, but it is still a Fender I regret that I should have bought the Eliminator Kit View detail
Fits: KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI D Tracker 125
I will do the function, but the making is rough
In the case of klx 125, bond it with double-sided tape
Grinding the adhesive surface neatly with a water-resistance paper and scraping the Plating face I pasted it on the plastic side which became black with double-sided tape at the bottom of the product but there is a gap at the top of the installation and there is no stability feeling. I feel uncomfortable because I feel like I'm off by vibration while driving. We have a gap in the upper gap Tape (Purchased at Home center) There was less glittering across the. It is too bad that I do not have an Instruction Manual. I can easily imagine the installation ? ? ? I do not explain about power consumption, even if my back is dirty if I recommend it to an acquaintance, I will say that LED with Fender Eliminator is better. It is a product that makes the function Large but worries about Large. Certainly the taillights are also bright, and the Stop-Lamp also gets brighter about twice
View detail
Fits: KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI D Tracker 125
I just arrived ? ? ?
In the evaluation of making itself it seems that Wiring processing etc. are sloppy. I feel excessive if it is said that anti-shake and disconnection measures. We plan to review again after installation. There was neither a box nor the Instruction Manual in the product itself Reduction in cost ??? View detail
very good
Installation is easy and brightness is also necessary enough.
I think that it is a good product with high visibility.
I was surprised because there was no installation manual,
It was easy to install.
View detail
Fits: HONDA GB250 CLUBMAN Type 4, HONDA GB250 CLUBMAN Type 1, HONDA gb250 clubman type 1 - 4, HONDA MOTRA, HONDA V-TWIN MAGNA, HONDA V-TWIN MAGNA S, HONDA TOPIC, HONDA TOPIC PRO, HONDA NS-1, HONDA JADE, HONDA GYRO X, HONDA GYRO UP50, HONDA CB-1 400
no problem
I adjusted it to the purchase of Smoke Tail Lens
The installation of Valve itself is easy because it just plugs in, but the position of the Screw hole with Lens is slightly Gap and forcibly pushed in
Unlike a light bulb, the entire Lens is perfectly equal and etc.. Beautiful as it glows
In the case of Mas Two you may be a bit drowned in the subsequent Motorcycle?
Because I am a self-satisfied world, I think that Cost performance depends on each person's values
View detail