Reviews
Not omni-directional Stretch
Stretch only in the longitudinal direction.
Six plastic Hooks are included.
The feel of the product is confusing at first, as it does not extend in the direction you intend to cover.
I found it easier to use the entire rear of the Seat as a loop.
The fabric is thin but firm, but the part where the draw cord is threaded is only sewn with a folded over seam, so I would be a little careful here.
Compared to Netcord, it is not universal in comfort, but it is strong in that it does not tangle, Small objects do not fall out, and it is waterproof.
As for the size, if you remember the direction in which the fabric stretches and the hang of wrapping the entire seat, you can cover even a small seat or a motorcycle with a few loading points with a surprisingly high degree of tolerance and freedom,
If you are worried about the size, we recommend the L size because it can be rolled up and thrown under the narrow seat of the SV650X.
View detail
I am concerned about Bolt's Size.
Here are my impressions after installing on a Triumph SpeedTWIN1200.
Since there was no place where a Net could be attached, it was installed in the form of replacing the Bolt on the Rear suspension.
The work was easy and securely installed, and the Net is now ready for use.
Also, the texture is adequate for the price.
I bought Black, and if I wanted, I would be happy if the center Bolt was also Black.
Bolt size was a concern during installation.
The length was fine, but the diameter was slightly smaller than M8, and I was a bit concerned about the possibility of the mountains licking if I tightened the screws too hard.
(It may be correct to say that the Frame side may be just slightly larger than the M8, so it is not an outstanding match when installed on SpeedTWIN.)
I'm generally satisfied.
View detail
BackrestKit
I am very pleased with the quick response and look forward to riding my Motorcycle.
We look forward to the opportunity to work with you again.
View detail
This is still more convenient
The OEM Hook was a separate upper and lower type that required pulling it out and then opening the upper side, but I didn't feel the need to hook it so tightly on the highway on my 125cc, so I replaced it with an inconvenient type. As a result, I replaced it with a Large type, which is convenient and allows me to hook a small bag or a bag of convenience without any stress. View detail
Good to use with Seat bag from Henly Begins.
I purchased this for the purpose of securing items that do not fit into the SeatBack to the top.
With Net, I didn't want things to pop out of the mesh, so I chose this Type.
It is also waterproof, so a little bit of Small rain will not wet the items to which it is attached.
However, it must be used with the understanding that while it can protect against rain from above, it is not perfectly waterproof since it is a SEEDBag underneath.
The fabric is stretchy, but not extremely stretchy.
Net type is easier to install because the direction of extension is also fixed to some extent.
The fabric may be too Large for some items, but it is good that it can be adjusted by tightening the Rubber string around it.
The original purpose was to fix the luggage on top of the Henly Begins Seat bag, so I actually attached it temporarily, but it is still Exactly.
The position of the D Ring is also Exactly and Large satisfactory.
View detail
Available for yzf-r25
It could be used for yzf-r25.
I am planning an overnight touring trip and my normal Seat bag will not be able to handle it, so I purchased this product.
If I wanted to buy a large seat bag, it would cost about 10,000 yen, but I felt that I would not use it that often, so I put my Rucksack on the Tandem seat and hook the Belt to the Hook here to hold it in place.
Although a fixed belt must be purchased separately, it is cheaper than buying a large Seat bag!
It is also recommended for occasional overnight Touring with SS, as it is hardly noticeable!
View detail
Also applicable for SS
It could be used for yzf-r25.
I am planning to go on an overnight touring trip and my normal Seat bag will not be able to handle it, so I purchased this Belt.
A large seat bag would cost about 10,000 yen, but I felt that I would not use it that often, so I can put my Rucksack on the Tandem seat and secure it tightly with the Belt.
You need to purchase a separate License PlateHook, but it is cheaper than buying a large Seat bag!
View detail
Repair Parts are important
Belt was replaced due to aging of the Clip, thanks to Manufacturer's replenishment and inventory of WeBig. View detail
temporary custom
Custom Convenient Hook.
The Bolt can be easily replaced with a single bolt, so even beginners can easily customize it.
View detail
Trust Brand
Yamaha Bolt, purchased for securing luggage on Rear Carrier.
KIJIMABackRailQuantity:Pair (for Left and Right) This touring net is being used by hooking it up to the
Thanks to KIJIMA BackRail, Net does not interfere with Rear Fender.
I was concerned about the 100-unit Net, so I purchased a trustworthy BrandTANAX product.
I have just started using it and it holds my luggage firmly in place and looks like it will last a long time.
View detail
I can't believe it.
When I installed ODAX Grab Rail, I could not hang touring hook because Rail Clearance is too narrow. I installed a low-priced product from KN Kikaku as a last resort ?It is wonderful. The finish is beautiful and the touring net can be used without any problem. The cap bolt that comes with the product cannot be used because of the Grab Rail, so I replaced it with a stock bolt. I really wanted to get a Black one, but I think it would be good! View detail
Case of another Manufacturer.
We were looking for a case from another manufacturer, but when we tandem the case, my daughter said it was too stiff when she leaned on it....
The included Screw cannot reach it because of its different shape, but we were able to change it to 40mm and install it.
It seems to stick out a little, but in my daughter's opinion, it is GOOD!
View detail
It's very easy.
I bought it because I read that it was good in your impresion and I had back pain.
It is so good that I wish I had installed it sooner.
The work takes about one hour if the tools are available.
The instruction manual can be downloaded from the enclosed paper via QR code or Honda.
Personally, the most time-consuming part was the final installation of the back Cover.
I had a hard time getting soapy water on it and pushing it in.
View detail
Seat bags are easier to load.
Since Seat bags and Boston bags are often carried on the rear end of the Seat when touring, we aimed to increase load capacity by attaching this Loading Hook and Grab Bar.
As expected of an OEM product, the quality is perfect, and the mounting position is very convenient for loading the luggage.:Set
However, since the Instruction Manual is somewhat confusing and there are many Bolts and Covers to remove, it was not possible to complete the work in the 0.5h written work time.
Also, since this is for a car that does not have such equipment on the body, I really hope that Option Parts is at least a little less expensive ^ ^.
However, it will definitely improve the load capacity by a LARGE amount, so I am looking forward to going on long tours with it!
View detail
Useful.
I am using it as an additional fixture for Bag and it is very useful. View detail
Purchased for securing luggage
We chose antlion, although there are cheaper ones for the same purpose from other companies.
The price is high and I am satisfied with both quality and design.
Hook also takes without problems.
View detail
Comes in handy when you have extra luggage!
I don't often use it with Touring netSingle Body, but with NINJA1000, M size is too tight, but it can carry something like a box of Sneakers.
I mainly use Seat bag + Touring net (M). When I have a little less luggage, I use a sub-hook to adjust the load.
I carry it in the drink holder of my Seat bag.
I left it in there, so when I thought it would be there and my luggage grew, I cried when it wasn't there. (Laughs)
View detail
Now you don't have to worry about long touring!
The Hook is essential when carrying a large backpack for long touring or camping touring.
The more Hooks you have, the more you can use, and the larger the Hooks, the more you can use.
This Hook is satisfactory and useful.
View detail
License Plate is not bent
I bought this because when I put a Cover on my motorcycle, it hits the License Plate and bends. I was worried about the large load on the screws because they are plastic, so I applied Screw Lock to the screws to prevent them from falling off.
It also looks good.
View detail
Can be used for NC750X OEMBox
I bought this backrest because I thought it could be used on my NC750X (RH09) since the part number of the box to install it is the same as that of NT1100. The backrest of NC750X is poor, but this backrest is very comfortable to ride on because the thickness of the material is different. I thought it would look good on a red colored body, but I thought it would be better to paint the stitches on a different color.
The price is high, but it is an OEM Product.
View detail