![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Rear Blinker Relocation Bracket](https://img.webike-cdn.net/catalogue/18384/ssr-utb_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Convenient for Blinker relocation. High quality.
The Blinker was interfering with the side bag, so we used this to relocate it.
Side bag is no longer compressed.
The lighter Blinker was recommended over the OEM Blinker, so I made the change. I have driven several thousand kilometers with no problems.
I am satisfied with the high quality and practicality of the product.
I wonder if a Blinker with a Large tilt would stand up to it anymore.
View detail
![Classic Fender Bracket Style Side Bag Support Bar](https://img.webike-cdn.net/catalogue/images/83762/w650ss_TS.jpg)
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
I chose Black with Powder coat!
The normal front fender bracket was black, so we asked the paint shop to powder coat it, and then we ordered the parts, brought them to the paint shop, and had Kawasaki Plaza do everything from ordering the parts to installing them.
This is my personal favorite Custom.
View detail
![Classical Fender Bracket Air Side Bag Support Bar](https://img.webike-cdn.net/catalogue/18384/ssr-ssb_TS.jpg)
Fits: YAMAHA SR500, YAMAHA SR400
The most natural atmosphere among side bag supports for SR400
There are various side bag supports for SR400, but Shim's Craft's side bag support feels comfortable when I put it on.
The front side uses a Seat Fixing Bolt, so it will be wobbly if the Seat is removed. When installing the rear side, it is easier to remove the License Plate.
View detail
![Meter Bracket](https://img.webike-cdn.net/catalogue/images/84173/meterstay_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Satisfaction that no one notices from the side
The MeterBracket is simpler than the NORMAL and I like it better. I like it. The MeterBracket is simpler than the NORMAL and I like it, but it is so normal that I don't even care about Custom↓ anymore. So far I have no complaints. View detail
![Classic Fender Bracket Style Side Bag Support Bar](https://img.webike-cdn.net/catalogue/images/83762/w650ss_TS.jpg)
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
I like it
I waited a long time, but I like it as much as I waited. It's not a cheap product, but the side bag carrier I've been using pops out when I raise the side bag. -------------------------------------------------- ------ I've been waiting for a long time, but I like it as long as I waited. It's not cheap, but when the sideback carrier is using the side bag, the side bag pops out. Powered by Google Translator View detail
![Hand Bend Exhaust Pipe - Traditional Megaphone Exhaust Set Full Exhaust](https://img.webike-cdn.net/catalogue/18384/ssr-tem01_TS.jpg)
Fits: YAMAHA SR500, YAMAHA SR400
Pleasant bass.
The sound is pleasantly low-pitched, not vulgar, and I am glad I bought it.
It looks close to NORMAL and Material:Polishing is beautiful and different from cheap plating.
It will be a long term relationship.
View detail
![Classic Fender Bracket Style Side Bag Support Bar](https://global.webike-cdn.net/photo/impression/48/484a847251089d69930bf33298e66489L.jpg)
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
To the old Style…
The back support is a style reminiscent of the old MeguroK2, and is so perfect for the MeguroK3 that it is almost hidden by the back. View detail
![Traditional Megaphone Exhaust Slip-On](https://img.webike-cdn.net/catalogue/18384/ssr-m02_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500
It sounds good.
I am satisfied with the sound, it has a nice Pulse feel.
When combined with SP Tadao's PowerBoxPipe, I did not feel a drop in Torque at low speeds, which was my concern.
View detail
![Rear Mudguard](https://img.webike-cdn.net/catalogue/18384/sd50-mg_TS.jpg)
Good!
I like it. Dream50 Rear mud guard. This is the best what i bought parts of dream50 ac15 cb50v products. My dreams come true by honda dream50 View detail
![Classic Fender Bracket Style Side Bag Support Bar](https://img.webike-cdn.net/catalogue/images/83762/w650ss_TS.jpg)
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
A perfect piece
As for the installation, I don't think it's helpful because it's a used item that was given to me...
It is a RearBack support of the spec. similar to the RearFender support seen in the old Meguro and W1 etc.
Moreover, I think that it is possible to install it with vibration reinforcement because there is a mounting part in FenderRear about the weight increase accompanying the relocation of Rear blinker.
After installation, I was able to fix the Fender more robustly as I aimed.
Compared to the KIJIMA product used in ESTRELLA, the back support is SMART and not too large.
After all, the atmosphere is the same as the design from Meguro, and I am very satisfied with the old-fashioned natural shape that is different from other manufacturers of the same etc. products.
It is made of SUS, and it is said that it is light and does not rust, but I thought about the influence of the electric corrosion, and I gave the measure of the rust occurrence suppression just in case, and the weight is certainly lighter than iron. I do not have trouble of roll-in etc. by using canvas.
The finish and design are not bad, and if you are thinking of something a little different, you will be satisfied.
I really liked it, even without the Back, it was quite austere.
View detail
![Meter Bracket](https://img.webike-cdn.net/catalogue/images/84173/meterstay_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Installed on a 2020 Model 5 SR
When the Handlebar is changed to Separate handle, the height of the Meter becomes noticeable.
The installation of this product has alleviated the problem. Happy with the angle and the look.
If you want to use Normal meter, I think this is the product for you.
View detail
![Creative Sound Exhaust Full Exhaust](https://global.webike-cdn.net/photo/impression/61/61c455f086bfdeb6891b76d2c7515993L.jpg)
Fits: KAWASAKI W400, KAWASAKI W650
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Cabton to Up, as usual.
I'm glad I bought it, it changed my W's Image completely.
The installation is OK without any problems as expected JAPAN
View detail
![License plate bracket](https://global.webike-cdn.net/photo/impression/36/3664aef36bf447289a535ea0e180bc77L.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Like SR.
I moved the Blinker to the Tail and lost the Reflector, so I relocated it. I bought a Nut that fits the size of the OEM Reflector at Home center and installed it because the diameter of the Nut did not fit. The bracket of the reflector is visible because it interferes with the mudguard, but I am very satisfied with the result. View detail
![Traditional Megaphone Exhaust Slip-On](https://global.webike-cdn.net/photo/impression/a7/a7524dc33e434232fcebaaac9f9024deL.jpg)
Fits: YAMAHA SR400, YAMAHA SR500
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
I think it's a great exhaust system!
I'm using it for the SR400Fi 2019MODEL
I was not satisfied with the sound volume and quality of sound like CUB with the OEM exhaust system, so I decided to buy this one Purchased
The result is Large Satisfaction
I used it for a while with Baffle, but I got used to the volume, so I took it off now It is
As others have reviewed
Not too loud, not too quiet I think it's just the right amount of volume so you don't get tired of listening to it for long periods of time
As you would expect when driving past 10pm in a residential area, etc That's not loud enough for this hour &hellip I think so … lol
It has been very well received by friends and family members who have been riding in the back
I was idling at an intersection and the driver of the Truck next to me That sounds great! I was complimented on that lol
Is the exhaust system from another company that I bought new before this one used? It was so dirty that you'd think
Torque was also skunked and disgusting, so the beauty of Shim's Craft is that it's a great idea It feels outstanding
We can confidently recommend this exhaust system
View detail
![Hand Bend Exhaust Pipe - Traditional Megaphone Exhaust Set Full Exhaust](https://global.webike-cdn.net/photo/impression/fe/fefd85217b8c4f8e5b48c4e7ec0a6636L.jpg)
Fits: YAMAHA SR500, YAMAHA SR400
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
I'm redoing the post
Since the oil level was gapped to Large width, I adjusted it correctly and found that the Carburetor The setting has changed, Main jet 170, 1 and 1/2 steps from the top of Needle, and Pilot Jet 30, Pilot screw2 and 1/4 back, this is a good place to be!
The way to adjust the 1/2 of the Needle is to have a thick Washer on top of the Clip, and under the Clip There is a white washer, and a thin washer underneath it, but there is also a thin washer and a thick washer If the washer is replaced, it will be half as thick as the clip position
View detail
![Maintenance Stand](https://img.webike-cdn.net/catalogue/18384/ssr-stm_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
I'm glad I bought it
Since the Center Stand was out of second hand purchase, I was thinking whether to buy a used OEMCenter Stand and use it. However, since the condition was not good, I bought this one. Exhaust System installed YOSHIMURA, it was able to install as it was without interfering. One thing I felt was using the Rubberetc. I thought it would be nice if there was a cushioning part of. As I lifted the car, I got scratched on the floor of Concrete and paint added, and STAND got scratched. You can attach it yourself (Lol) View detail
![Exhaust pipe fixing bracket](https://img.webike-cdn.net/catalogue/18384/ssr-es_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Good
Since my exterior pipe was fitted with an external exhaust pipe, the fixation was not secure and the exhaust pipe and the silencer were disconnected, so I found out what seemed like a good thing.
Silencer will not come off as it can be fixed firmly, exhaust leakage has also gone, sound has improved.
I think that it is a bit overkill but I am satisfied..
View detail
![Rear Carrier Stock Replica Type](https://img.webike-cdn.net/catalogue/18384/skm-sr2_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Loading Up
Commuting Spec. I bought it because I wanted to install a Top case.
I got lost with things of Y's Gear, but I chose this, expecting refreshing feeling.
It was easy to install with just about changing it as Grab Bar.
I think that there is a little hang to fix with Bolt while just finely adjusting straight with respect to the car body.
Since the back part is higher, it will be slanted if you do not process a minority of Base.
Although it looks thin, it is very satisfying because it makes it possible to build luggage with confidence by making it very sturdy.
View detail
![Stainless Steel Chain Case](https://global.webike-cdn.net/photo/impression/14/14ae1bc754fc40a869f7ed4968fc884eL.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
it's recommended.
I bought it because the Chain cover of NORMAL did not arrive at the exchange of Rear suspension.
It is more light design than NORMAL's Cover, Cut of the Suspension part also has no interference with Large KYB KGS 325.
The thickness of Stainless Steel is also sufficient, lightness like Aluminum can not be expected, but for vehicles with many vibrations like SR, there is a sense of security in the strength of this thickness.
I finished work in about 15 minutes without installing or removing Suspension.
With this build, this price ... Recommended.
View detail
![Hand Bend Exhaust Pipe - Traditional Megaphone Exhaust Set Full Exhaust](https://global.webike-cdn.net/photo/impression/f1/f11641d64729a0de21f7e346ad6dac74L.jpg)
Fits: YAMAHA SR500, YAMAHA SR400
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
OEM look, Hand Bent is beautiful.
First the sound is good?
The bass is working and it feels good to touch.
I have not done the Carburetor setting, although there are some AfterFire, it is considerably fewer than the Exhaust System I've been using until now ('∀ `)
Hand Bent Exhaust Pipe is very beautiful, ◎ is OEM look.
I also enjoyed running even more!
I am very favorite. (О '∀ `о) !
View detail