Reviews
Fits: YAMAHA SR500, YAMAHA SR400
Classic and cool.
Installed on SR400Final edition.
It fit without any problems.
Anyway, I am very happy with Classical.
I installed the Side Back on the Left Side, but the Back interferes with the Chain.
I gave this place 4 stars because it was unexpected.
Even with that, I am very satisfied with the product.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Convenient for Blinker relocation. High quality.
The Blinker was interfering with the side bag, so we used this to relocate it.
Side bag is no longer compressed.
The lighter Blinker was recommended over the OEM Blinker, so I made the change. I have driven several thousand kilometers with no problems.
I am satisfied with the high quality and practicality of the product.
I wonder if a Blinker with a Large tilt would stand up to it anymore.
View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
I chose Black with Powder coat!
The normal front fender bracket was black, so we asked the paint shop to powder coat it, and then we ordered the parts, brought them to the paint shop, and had Kawasaki Plaza do everything from ordering the parts to installing them.
This is my personal favorite Custom.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
First of all, I'm satisfied.
I regretted that I should have chosen this one over DAYTONA from the beginning, but the fact that it can be installed even with Y's Gear's Rear Carrier is highly appreciated!
I can't help but feel that prices are high due to the high cost of living, but … I hope you do your best with the prices, etc!
View detail
Fits: YAMAHA SR500, YAMAHA SR400
The most natural atmosphere among side bag supports for SR400
There are various side bag supports for SR400, but Shim's Craft's side bag support feels comfortable when I put it on.
The front side uses a Seat Fixing Bolt, so it will be wobbly if the Seat is removed. When installing the rear side, it is easier to remove the License Plate.
View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
I am satisfied with the Retro place.
In installing the Side Back Support bar, the common design of DAYTONA's
I wanted to make a Retro one to match my W800, not a W800. Found this product.
I knew it would be expensive and the delivery time would be long, but I really wanted to put it on.
We placed an order and waited 4 months for delivery and finally received it.
I put it on and was satisfied with the quality of the texture as expected. But the price is a bit high and
I gave it 4 stars overall because of the long delivery time.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
small change
Depends on the location of the ETC Antennas.
Light and thus interfere with Meter and
Light gaps may be wider
I just need to change the length of the Light Bracket.
Because of the similarities and differences in Size.
I am in a state of wondering what to do.
Those who wear Antennas between Meter...
Caution.
Separate handle is more delicate to install.
It is a change, but I think it will look good together.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Satisfaction that no one notices from the side
The MeterBracket is simpler than the NORMAL and I like it better. I like it. The MeterBracket is simpler than the NORMAL and I like it, but it is so normal that I don't even care about Custom↓ anymore. So far I have no complaints. View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
I like it
I waited a long time, but I like it as much as I waited. It's not a cheap product, but the side bag carrier I've been using pops out when I raise the side bag. -------------------------------------------------- ------ I've been waiting for a long time, but I like it as long as I waited. It's not cheap, but when the sideback carrier is using the side bag, the side bag pops out. Powered by Google Translator View detail
Fits: YAMAHA SR500, YAMAHA SR400
Pleasant bass.
The sound is pleasantly low-pitched, not vulgar, and I am glad I bought it.
It looks close to NORMAL and Material:Polishing is beautiful and different from cheap plating.
It will be a long term relationship.
View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
To the old Style…
The back support is a style reminiscent of the old MeguroK2, and is so perfect for the MeguroK3 that it is almost hidden by the back. View detail
Fits: YAMAHA SR400, YAMAHA SR500
It sounds good.
I am satisfied with the sound, it has a nice Pulse feel.
When combined with SP Tadao's PowerBoxPipe, I did not feel a drop in Torque at low speeds, which was my concern.
View detail
Nice exhaust
Well-looking exhaust with nice (but not loud) sound. There is just one heat shield for rider, and nothing for passenger. I know they are exist, but i had not found the way how to order them additionally. Also i wanted to play with mufflers sound, but could not pull out the catalysts. Installation was easy except the problems with original yoke/baggage system. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Design priority, not practical.
I love the Design and bought it with my new car purchase.
Small top case (25L) I had been using it for commuting and touring, but it broke after 5 months of purchase and 2200km of driving.
It is as slender as it looks. And since it is not made of steel, it is difficult to weld and repair…
If you're thinking of wearing the Case all the time, you might want to remove it from your options.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Meter Bracket replacement
OEM Meter angle was bothering me, so I replaced it.
Functionally satisfactory, but a little disappointing because of the high price and sweet paint job.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Required when rear suspension is changed.
I installed this product to replace the rear suspension with Other Brand Product.
I was looking for a design that was as NORMAL as possible, and this product was it.
InstallationInstruction ManualThe manual is well written and anyone can install it.
View detail
Good!
I like it. Dream50 Rear mud guard. This is the best what i bought parts of dream50 ac15 cb50v products. My dreams come true by honda dream50 View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
A perfect piece
As for the installation, I don't think it's helpful because it's a used item that was given to me...
It is a RearBack support of the spec. similar to the RearFender support seen in the old Meguro and W1 etc.
Moreover, I think that it is possible to install it with vibration reinforcement because there is a mounting part in FenderRear about the weight increase accompanying the relocation of Rear blinker.
After installation, I was able to fix the Fender more robustly as I aimed.
Compared to the KIJIMA product used in ESTRELLA, the back support is SMART and not too large.
After all, the atmosphere is the same as the design from Meguro, and I am very satisfied with the old-fashioned natural shape that is different from other manufacturers of the same etc. products.
It is made of SUS, and it is said that it is light and does not rust, but I thought about the influence of the electric corrosion, and I gave the measure of the rust occurrence suppression just in case, and the weight is certainly lighter than iron. I do not have trouble of roll-in etc. by using canvas.
The finish and design are not bad, and if you are thinking of something a little different, you will be satisfied.
I really liked it, even without the Back, it was quite austere.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Not bad, but not as good as OEM.
I really wanted to add a Rear Carrier, so I bought this one from OEM replica.
I had high hopes for Shims' product.
It is used for touring immediately.
good point
●This is not Attachment, but a practical Carrier.
Plating finish is also beautiful.
Easy to install.
A bad point
The structure is delicate. I tied it tightly, but it collapsed.
The price difference is only about $1,000 from OEM.
I then bought the OEM one and the Pipe thickness is as different. This one was thinner.
After all, there is a considerable difference from the OEM Product.
But I think this product is Slim, Stylish and suitable for people who want to load it and use it as Attachment.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Installed on a 2020 Model 5 SR
When the Handlebar is changed to Separate handle, the height of the Meter becomes noticeable.
The installation of this product has alleviated the problem. Happy with the angle and the look.
If you want to use Normal meter, I think this is the product for you.
View detail